Artificial aging time influencing the crack propagation behavior of the aluminum alloy 6060 processed by equal channel angular pressing
Source abstract
Abstract
Abstract The combination of a severe plastic deformation (SPD) by equal-channel angular pressing (ECAP) with a subsequent heat treatment significantly influences the precipitation characteristics of age-hardenable aluminum alloys. The aging kinetics is accelerated and the morphology of the precipitates is affected by the induced strain. In the present study, the influence of the artificial aging time and the resulting precipitation morphology on the fatigue threshold was investigated for the aluminum alloy 6060 with conventional grain size (CG) and after ECAP processing. Four artificial aging conditions are compared for the as-extruded and ECAP processed material, respectively. The resulting microstructure is examined by transmission (TEM) and scanning transmission electron microscopy (STEM) and related to the processing condition and the aging time. The mechanical properties are characterized by tensile and hardness testing and crack propagation tests are conducted in order to determine the threshold ΔKth. The ECAP processed conditions exhibit a lower resistance against crack propagation regardless of the aging time, when compared to the as-extruded conditions. Therefore, the grain size is determined as the major influencing factor on the fatigue threshold. In contrast, the effect of the aging time and the precipitation morphology is only minor. When compared to incoherent precipitates, coherent ones promote planar slip resulting in an increased threshold against crack propagation for both CG and finer grained, bimodal microstructures. However, the size of the coherent precipitates and the resulting lattice distortion is decisive to achieve higher fatigue thresholds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Materials processing by simple shear10.1016/0921-5093(95)09705-8 ↗
2. Review: modes and processes of severe plastic deformation (SPD)10.3390/ma11071175 ↗
3. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
4. Estrin · 2010
5. Cyclic deformation and fatigue properties of very fine-grained metals and alloys10.1016/j.ijfatigue.2009.10.007 ↗
6. Fatigue limit and crack growth in ultra-fine grain metals produced by severe plastic deformation10.1007/s10853-006-0973-z ↗
7. Overview of fatigue properties of fine grain 5056 Al-Mg alloy processed by equal-channel angular pressing10.1016/S0921-5093(00)01682-8 ↗
8. Effect of aging treatment on heavily deformed microstructure of a 6061 aluminum alloy after equal channel angular pressing10.1016/S1359-6462(01)01109-5 ↗
9. Optimization of strength and ductility of 2024 Al by equal channel angular pressing (ECAP) and post-ECAP aging10.1016/S1359-6462(03)00260-4 ↗
10. The influence of metallurgical factors on low cycle fatigue behavior of ultra-fine grained 6082 Al alloy10.1016/j.ijfatigue.2018.01.018 ↗
11. Improvement of strength and ductility for a 6056 aluminum alloy achieved by a combination of equal-channel angular pressing and aging treatment10.1007/s10853-010-4544-y ↗
12. Influence of precipitates on low-cycle fatigue and crack growth behavior in an ultrafine-grained aluminum alloy10.1016/j.actamat.2014.07.061 ↗
13. Influence of grain size and precipitation state on the fatigue lives and deformation mechanisms of CP aluminium and AA6082 in the VHCF-regime10.1016/j.ijfatigue.2010.04.013 ↗
14. Effects of microstructure on fatigue crack propagation and crack closure behavior in aluminum alloy 715010.1016/0025-5416(85)90276-9 ↗
15. Effect of aging on fatigue-crack growth behavior of a high-temperature titanium alloy10.2320/matertrans.45.1577 ↗
16. Effects of precipitates on fatigue crack growth rate of AA 7055 aluminum alloy10.1016/S1003-6326(10)60630-9 ↗
17. Mechanism of precipitate microstructure affecting fatigue behavior of 7020 aluminum alloy10.3390/ma13153248 ↗
18. Microstructure and fatigue crack in a γ-Fe-Ni-Al alloy10.1016/0001-6160(76)90104-8 ↗
19. Near-threshold fatigue crack propagation in an ECAP-processed ultrafine-grained aluminium alloy10.4028/www.scientific.net/MSF.667-669.873 ↗
20. Effect of artificial aging on the fatigue crack propagation resistance of 2000 series aluminum alloys10.1016/S0142-1123(01)00159-1 ↗
21. The crystal structure of the β″ phase in Al–Mg–Si alloys10.1016/S1359-6454(97)00493-X ↗
22. DIN 50125 · 2016
23. ASTM E399 · 2013
24. Crack growth in ultrafine-grained AA6063 produced by equal-channel angular pressing10.1007/s10853-008-2725-8 ↗
25. Valiev · 2000
26. Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena10.1016/j.msea.2012.01.080 ↗
27. The precipitation sequence in Al-Mg-Si alloys10.1016/S1359-6454(98)00059-7 ↗
28. Precipitation hardening in aluminum alloy 602210.1016/S1359-6462(99)00046-9 ↗
29. Nanoscale modelling of combined isotropic and kinematic hardening of 6000 series aluminium alloys10.1016/j.mechmat.2020.103603 ↗
30. Near-threshold fatigue crack growth at room temperature and an elevated temperature in AlLi alloy 809010.1016/0921-5093(92)90112-E ↗