The effect of high-pressure torsion on the microstructure and outstanding pseudoelasticity of a ternary Fe–Ni–Mn shape memory alloy
Source abstract
Abstract
Abstract Experiments were conducted to examine the effect of high-pressure torsion (HPT) processing on the microstructure and pseudoelastic behavior of a ternary Fe–10Ni–7Mn (wt.%) shape memory alloy in both the solution-annealed and intercritically-annealed conditions. X-ray diffraction (XRD) patterns and electron backscatter diffraction (EBSD) analyses showed that the initial microstructure of the alloy in the solution-annealed condition was a fully lath α′-martensite which partially transformed to a strain-induced austenite (α′→γ) by HPT processing. Also, the austenite formed in the dual phase (α′+γ) specimens after intercritical annealing treatment at 600 °C for 7.2 ks underwent a γ→e→α′ transformation during subsequent HPT processing such that a multi-phase microstructure was formed consisting of α′-martensite, austenite and e-martensite. The HPT processing led to a significant increase in the microhardness value to ~690 Hv due to a high density of dislocations and the associated grain refinement of the microstructure. Cyclic loading-unloading tensile tests at room temperature revealed a strain hysteresis and pseudoelastic behavior in the HPT-processed specimens with different initial microstructures. Outstanding pseudoelasticity values of about 67% and 75% were obtained at the fourteenth loading-unloading cycle after 20 HPT turns in the solution-annealed and intercritically-annealed specimens, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Iron-based shape memory alloys for civil engineering structures: an overview10.1016/j.conbuildmat.2014.04.032 ↗
2. Maruyama · 2011 · 141
3. Self-prestressing using iron-based shape memory alloy for flexural strengthening of reinforced concrete beams10.14359/51689455 ↗
4. Feasibility of iron-based shape memory alloy strips for prestressed strengthening of concrete structures10.1016/j.conbuildmat.2014.01.069 ↗
5. Recovery stress formation in a restrained Fe-Mn-Si-based shape memory alloy used for pre-stressing or mechanical joining10.1016/j.conbuildmat.2015.07.098 ↗
6. Thermally activated iron-based shape memory alloy for strengthening metallic girders10.1016/j.tws.2019.04.036 ↗
7. An unique feature of mechanical property of iron-nickel-manganese alloy10.1016/0924-0136(95)02003-5 ↗
8. Characteristic features of shape memory effect and related transformation behavior in Fe-based alloys10.1016/S0921-5093(99)00290-7 ↗
9. The pseudoelastic behavior of Fe-Mn-Si-based shape memory alloys containing Nb and C10.1088/0964-1726/14/5/022 ↗
10. Temperature dependence of critical stress and pseudoelasticity in a Fe-Mn-Si-Cr pre-rolled alloy10.1016/j.jallcom.2010.04.123 ↗
11. Effects of alloying additions on Fe-Mn-Si shape memory alloys10.2355/isijinternational.30.674 ↗
12. Development of Fe-based shape memory alloys associated with face-centered cubic-hexagonal close-packed martensitic transformations: Part I. Shape memory behavior10.1007/BF02647326 ↗
13. A review on the martensitic transformation and shape memory effect in Fe-Mn-Si alloys
14. Effects of thermo-mechanical training on a Fe59Mn30Si6Cr5 shape memory alloy10.1016/j.msea.2006.02.119 ↗
15. Remarkable improvement of shape memory effect in Fe-Mn-Si based shape memory alloys by producing NbC precipitates10.1016/S1359-6462(01)00978-2 ↗
16. A novel Fe-Mn-Si shape memory alloy with improved shape recovery properties by VC precipitation10.1002/adem.200800312 ↗
17. Transmission electron microscopy study on the grain boundary precipitation of an Fe-Ni-Mn maraging steel10.1007/s11661-007-9407-z ↗
18. Precipitation behaviour in Fe-Ni-Mn martensitic alloys10.2320/matertrans1960.17.799 ↗
19. Development of pseudoelasticity in Fe-10Ni-7Mn (wt. %) high strength martensitic steel by intercritical heat treatment and subsequent ageing10.1016/j.msea.2014.10.049 ↗
20. Strain-induced martensite to austenite reverse transformation in an ultrafine-grained Fe-Ni-Mn martensitic steel10.1080/14786435.2014.886785 ↗
21. Observation of pseudoelasticity in a cold rolled Fe-Ni-Mn martensitic steel10.1016/j.msea.2016.01.113 ↗
22. Investigating on the reverse transformation of martensite to austenite and pseudoelastic behavior in ultrafine-grained Fe-10Ni-7Mn (wt %) steel processed by heavy cold rolling10.4028/www.scientific.net/AMR.829.25 ↗
23. On the stability of reversely formed austenite and related mechanism of transformation in an Fe-Ni-Mn martensitic steel aided by electron backscattering diffraction and atom probe tomography10.1007/s11661-017-4288-2 ↗
24. Reverse transformation mechanism of martensite to austenite and amount of retained austenite after reverse transformation in Fe-3Si-13Cr-7Ni (wt.%) martensitic stainless steel10.1179/026708303225009742 ↗
25. Reverse transformation mechanism of martensite to austenite in a metastable austenitic alloy10.1016/j.msea.2009.02.010 ↗
26. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
27. A review on high-pressure torsion (HPT) from 1935 to 198810.1016/j.msea.2015.11.074 ↗
28. High-pressure torsion–features and applications
29. Microstructure evolution and enhanced mechanical properties in SUS316LN steel processed by high pressure torsion at room temperature10.1016/j.msea.2017.11.064 ↗
30. Microstructure, phase composition and hardness evolution in 316L stainless steel processed by high-pressure torsion10.1016/j.msea.2016.01.057 ↗
31. Microstructural evolution and phase transformation in twinning-induced plasticity steel induced by high-pressure torsion10.1016/j.actamat.2016.02.045 ↗
32. The development of vacancies during severe plastic deformation10.2320/matertrans.MF201937 ↗
33. Ultrahigh-strength low carbon steel obtained from the martensitic state via high pressure torsion10.1016/j.actamat.2018.12.028 ↗
34. On the microstructure and mechanical properties of an Fe-10Ni-7Mn martensitic steel processed by high-pressure torsion10.1016/j.msea.2019.02.002 ↗
35. Synthesis of a bulk nanostructured metastable Al alloy with extreme supersaturation of Mg10.1038/s41598-019-53614-3 ↗
36. Nanostructured low carbon steels obtained from the martensitic state via severe plastic deformation, precipitation, recovery, and recrystallization10.1002/adem.201800202 ↗
37. High temperature thermal stability of nanocrystalline 316L stainless steel processed by high-pressure torsion10.1016/j.msea.2016.11.066 ↗
38. Superplastic flow in a nanostructured aluminum alloy produced using high-pressure torsion10.1016/j.msea.2008.09.049 ↗
39. Factors influencing superplasticity in the Ti-6Al-4V alloy processed by high-pressure torsion10.1016/j.msea.2018.01.091 ↗
40. Shape memory effect in nanocrystalline NiTi alloy processed by high-pressure torsion10.1016/j.msea.2014.12.056 ↗
41. Effect of Cu on amorphization of a TiNi alloy during HPT and shape memory effect after post-deformation annealing10.1002/adem.201900387 ↗
42. Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsion10.1016/j.actamat.2012.02.027 ↗
43. An investigation of hardness homogeneity throughout disks processed by high-pressure torsion10.1016/j.actamat.2010.09.034 ↗
44. Mechanical properties and structural stability of a bulk nanostructured metastable aluminum-magnesium system10.1016/j.msea.2020.140050 ↗
45. Ductility enhancement in ultrafine-grained Fe-Ni-Mn martensitic steel by stress-induced reverse transformation10.1016/j.msea.2010.08.028 ↗
46. Martensitic phase transformation and deformation behavior of Fe-Mn-C-Al twinning-induced plasticity steel during high-pressure torsion10.1002/adem.201300488 ↗
47. Evolution of microstructure, phase composition and hardness in 316L stainless steel processed by high-pressure torsion10.4028/www.scientific.net/MSF.879.502 ↗
48. Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys10.1016/j.msea.2004.01.059 ↗
49. Cabanas Poy · 2004
50. Investigation on the nucleation mechanism of deformation-induced martensite in an austenitic stainless steel under severe plastic deformation10.1557/jmr.2007.0094 ↗
51. Effects of strain state and strain rate on deformation-induced transformation in 304 stainless steel: Part II. Microstructural study, Metal10.1007/BF02644428 ↗
52. Different models of hardness evolution in ultrafine-grained materials processed by high-pressure torsion10.1007/s10853-013-7687-9 ↗
53. Tensile property of submicrocrystalline pure Fe produced by HPT-straining10.4028/www.scientific.net/MSF.584-586.597 ↗