journal article·2021-01

An examination of microstructural evolution in a Pb–Sn eutectic alloy processed by high-pressure torsion and subsequent self-annealing

Nian Xian Zhang, Megumi Kawasaki, Yi Huang, Terence G. Langdon

Publisher page

Abstract

The Pb-Sn alloy has a wide use in the electronic, energy storage and nuclear industries and a fine-grained Pb-Sn alloy may open up new possibilities for applications in these industries. In order to understand the behavior of grain refinement, a Pb-62% Sn eutectic alloy was processed by high-pressure torsion (HPT), stored at room temperature (RT) and then the microstructures of the alloy after HPT were repeatedly investigated during the course of self-annealing using electron backscatter diffraction, scanning electron microscopy and transmission electron microscopy. It is demonstrated that there is a large fraction of twin boundaries with a twin relationship of 62.8°<100> in the microstructure of the initial as-cast condition. Due to the presence of the high imposed pressure, the mobility of Ʃ21 boundaries at 71° is greatly favoured during processing by HPT. After the high pressure is removed, the mobility of dislocation-twin boundaries near 62.8°<100> is then favoured. Processing by HPT significantly increases the solubility of Sn in the Pb phase. The supersaturated state of Sn in Pb is not stable during self-annealing at RT and instead a decomposition of Sn from the Pb-rich phase is observed after storage for 16 days. The main mechanism for this decomposition is lattice diffusion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
2. Producing bulk ultrafine-grained materials by severe plastic deformation10.1007/s11837-006-0213-7 ↗
3. Processing of nanostructured metals and alloys via plastic deformation10.1557/mrs2010.702 ↗
4. Twenty-five years of ultrafine-grained materials: achieving exceptional properties through grain refinement10.1016/j.actamat.2013.08.018 ↗
5. Advances in ultrafine-grained materials10.1016/j.mattod.2013.03.004 ↗
6. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
7. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
8. Orientation imaging microscopy of ultrafine-grained nickel10.1016/S1359-6462(02)00018-0 ↗
9. Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion10.1016/S1359-6454(02)00466-4 ↗
10. A comparison of microstructures and mechanical properties in a Cu-Zr alloy processed using different SPD techniques10.1007/s10853-012-7072-0 ↗
11. Supergravity separation for recovering Pb and Sn from electronic waste10.1016/j.seppur.2017.09.041 ↗
12. Regeneration of Sn-Pb solder from waste printed circuit boards: a hydrometallurgical approach to treating waste with waste10.1016/j.jhazmat.2019.121589 ↗
13. Performance of new Pb-Bi alloys for Pb-acid battery applications: EIS and polarization study10.1007/s11665-016-2059-7 ↗
14. Electrochemical corrosion of Pb-Sn and Pb-Sb alloys for lead-acid battery applications10.12693/APhysPolA.134.103 ↗
15. Scope of Pb-Sn binary alloys as gamma rays shielding material10.1016/j.pnucene.2016.08.022 ↗
16. Lead (Pb)-free solders for electronic packaging10.1007/BF02651362 ↗
17. Influence of microstructure coarsening on thermomechanical fatigue behavior of Pb/Sn eutectic solder joints10.1106/KFD9-XR1F-VNVE-95XN ↗
18. Ductility of the superplastic Pb-Sn eutectic at room-temperature10.1007/BF00725431 ↗
19. The effect of grain size on ductility in the superplastic Pb-Sn eutectic10.1007/BF00726322 ↗
20. Effect of equal-channel angular pressing on superplastic behavior of eutectic Pb-Sn alloy10.1016/j.matdes.2011.08.004 ↗
21. Constructing a deformation mechanism map for a superplastic Pb-Sn alloy processed by equal-channel angular pressing10.1016/j.scriptamat.2009.08.001 ↗
22. Exceptional ductility in superplastic Pb-62 pct Sn eutectic10.1007/BF02646892 ↗
23. The microstructure of Sn in near-eutectic Sn-Ag-Cu alloy solder joints and its role in thermomechanical fatigue10.1557/JMR.2004.0222 ↗
24. Formation of Sn dendrites and SnAg eutectics in a SnAgCu solder10.1016/j.scriptamat.2009.05.034 ↗
25. Influence of Sn grain size and orientation on the thermomechanical response and reliability of Pb-free solder joints10.1109/TCAPT.2008.916835 ↗
26. Cyclic twin nucleation in tin-based solder alloys10.1016/j.actamat.2010.01.030 ↗
27. Incremental recrystallization/grain growth driven by elastic strain energy release in a thermomechanically fatigued lead-free solder joint10.1016/j.actamat.2006.11.023 ↗
28. Softening by severe plastic deformation and hardening by annealing of aluminum-zinc alloy: significance of elemental and spinodal decompositions10.1016/j.msea.2014.05.026 ↗
29. The effect of pressure on migration of <001> tilt grain boundary in tin bicrystals10.1016/0036-9748(84)90509-X ↗
30. Effect of pressure on grain boundary migration in aluminum bicrystals10.1016/0956-7151(94)90472-3 ↗
31. The significance of self-annealing in two-phase alloys processed by high-pressure torsión10.1088/1757-899X/63/1/012126 ↗
32. The significance of strain weakening and self-annealing in a superplastic Bi-Sn eutectic alloy processed by high-pressure torsion10.1016/j.actamat.2019.11.064 ↗
33. Microstructural evolution in two-phase alloys processed by high-pressure torsion10.1007/s10853-012-7087-6 ↗
34. Using finite element modeling to examine the flow processes in quasi-constrained high-pressure torsion10.1016/j.msea.2011.07.040 ↗
35. Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsion10.1016/j.actamat.2012.02.027 ↗
36. The orientation imaging microscopy of lead-free Sn-Ag solder joints10.1007/s11837-005-0135-9 ↗
37. Microstructural evolution in a two-phase alloy processed by high-pressure torsion10.1016/j.actamat.2009.10.007 ↗
38. Significance of strain reversals in a two-phase alloy processed by high-pressure torsion10.1016/j.msea.2010.07.090 ↗
39. Microstructural evolution and mechanical properties in a Zn-Al eutectoid alloy processed by high-pressure torsion10.1016/j.actamat.2014.03.026 ↗
40. Growth of Sn and intermetallic compounds in Sn-Ag-Cu solder10.1007/s11664-004-0083-0 ↗
41. Pb-free solder: new materials considerations for microelectronics processing10.1557/mrs2007.236 ↗
42. The rate of growth of dendrites in supercooled tin10.1016/0001-6160(54)90179-0 ↗
43. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
44. On the effect of high pressure on the grain boundary structures formed during recovery of aluminium10.4028/www.scientific.net/DDF.66-69.957 ↗
45. High-angle grain boundary migration in aluminium bicrystals
46. The formation and behaviour of incoherent twin boundaries in hexagonal metals10.1016/0001-6160(64)90103-8 ↗
47. The interaction of twins and precipitates in a Mg-7.7 at.% Al alloy10.1080/01418619808239980 ↗
48. Strain-induced grain refinement of cobalt during surface mechanical attrition treatment10.1016/j.actamat.2004.10.021 ↗
49. Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures10.1016/j.actamat.2007.09.020 ↗
50. An analytical approach and experimental confirmation of dislocation-twin boundary interactions in titanium10.1007/s10853-013-7284-y ↗
51. Plastic strain-induced grain refinement in the nanometer scale in a Mg alloy10.1016/j.actamat.2006.09.018 ↗
52. Slip-assisted twin growth in hexagonal close-packed metals10.1016/j.scriptamat.2008.08.044 ↗
53. Lead-free solders in microelectronics10.1016/S0927-796X(00)00010-3 ↗
54. Microstructure of severely deformed Al-3Mg and its evolution during annealing10.1016/S1359-6454(02)00203-3 ↗
55. Microstructural evolution in an Al-1.7 at%Cu alloy deformed by equal-channel angular pressing10.2320/matertrans1989.40.938 ↗
56. Deformation-induced anomalous phase transformations in nanocrystalline FCC Fe-Ni based alloys10.1016/S0965-9773(97)00150-5 ↗
57. Synthesis of a bulk nanostructured metastable Al alloy with extreme supersaturation of Mg
58. Mechanical properties and structural stability of a bulk nanostructured metastable aluminum-magnesium system10.1016/j.msea.2020.140050 ↗
59. Formation of nanograined structure and decomposition of supersaturated solid solution during high pressure torsion of Al-Zn and Al-Mg alloys10.1016/j.actamat.2004.06.006 ↗
60. The effect of relative crystal and boundary orientations on grain boundary diffusion rates10.1016/0001-6160(54)90061-9 ↗
61. Mechanical alloying of Cu and Fe induced by severe plastic deformation of a Cu-Fe composite10.1016/j.actamat.2005.01.024 ↗
62. Ultra-fast diffusion channels in pure Ni severely deformed by equal-channel angular pressing10.1016/j.actamat.2010.11.063 ↗
63. Free volumes in bulk nanocrystalline metals studied by the complementarytechniques of positron annihilation and dilatometry10.1016/j.physb.2012.01.090 ↗
64. High-pressure torsion for enhanced atomic diffusion and promoting solid-state reactions in the aluminum–copper system10.1016/j.actamat.2013.02.042 ↗
65. Rapid synthesis of an extra hard metal matrix nanocomposite at ambient temperature10.1016/j.msea.2015.03.042 ↗
66. Interface diffusion in eutectic Pb-Sn solder10.1016/S1359-6454(98)00348-6 ↗
67. Diffusion of Sn in Pb to 30 kbar10.1103/PhysRevB.16.2392 ↗