Direct determination of phase stress evolution in duplex steel using synchrotron diffraction
Source abstract
Abstract
Abstract The present work deals with the investigation of the micromechanical behaviour of a duplex steel, which consists of two phases (austenite and ferrite) exhibiting significantly different mechanical properties. The stresses in both phases were experimentally determined in the elastic and plastic ranges of deformation using synchrotron radiation diffraction experiments. The used methodology enabled to determine the values of initial stresses and to study the evolutions of the principal phase stresses and the second order stresses during the elastic, as well as the plastic range of deformation. With the help of a self-consistent model, the critical resolved shear stresses and the work hardening parameters for slip systems, active in each phase, were also estimated. Comparison of the measured phase stresses and lattice strains evolutions with the model results showed a good agreement between prediction and experiment when the initial stress state in the sample and shape of grains approximated by ellipsoidal inclusions were taken into account. The overall outcome of the work is the determination of stress partitioning between the two phases of a polycrystalline material for all deformation stages, determined directly from diffraction experiment. The results enabled analyses of von Mises, hydrostatic stresses as well as second order stresses evolutions in both phases during tensile deformation. Finally, the experimental data were successfully compared with predictions of the self-consistent deformation model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. Charles · 2015
2. Elastoplastic deformation and damage process in duplex stainless steels studied using synchrotron and neutron diffractions in comparison with a self-consistent model10.1016/j.ijplas.2016.01.018 ↗
3. Super duplex stainless steel: structure and properties
4. Practical guide to using duplex stainless steels
5. Wen · 2001
6. Phase transformation in duplex steels and the relation between continuous cooling and isothermal heat treatment
7. Super duplex stainless steels10.1179/mst.1992.8.8.685 ↗
8. Effect of solution treatment on the transformation behaviour of cold-rolled duplex stainless steels10.1016/0921-5093(95)09863-1 ↗
9. Influence of isothermal phase transformations on toughness and pitting corrosion of super duplex stainless steel SAF 250710.1179/mst.1993.9.7.545 ↗
10. Structural evolution of Zeron 100 duplex stainless steel between 550 and 1100°C
11. Structural stability of super duplex stainless weld metals and its dependence on tungsten and copper10.1007/BF02651874 ↗
12. Influence of sigma-phase formation on the localized corrosion behavior of a duplex stainless steel10.1007/BF02648847 ↗
13. Secondary austenite for mation and its relation to pitting corrosion in duplex stainless steel weld metal10.1179/mst.1995.11.3.276 ↗
14. Neutron time-of-flight diffraction used to study aged duplex stainless steel at small and large deformation until sample fracture10.1107/S0021889811025957 ↗
15. Effects of aging at 475 °C on corrosion properties of tungsten-containing duplex stainless steels10.1016/S0010-938X(02)00079-3 ↗
16. Influence of aging on intergranular corrosion of a 25% Chromium-5% nickel duplex stainless steel10.5006/1.3294339 ↗
17. Microstructural refinement of duplex stainless steels10.1179/mst.1991.7.2.137 ↗
18. Pitting corrosion of duplex stainless steels10.5006/1.3584986 ↗
19. Modelling and simulation of multi-phase effects on X-ray elasticity constants10.1002/pssb.200301833 ↗
20. Elastoplastic deformation of ferritic steel and cementite studied by neutron diffraction and self-consistent modelling10.1016/S1359-6454(02)00026-5 ↗
21. Damage in duplex steels studied at mesoscopic and macroscopic scales10.1016/j.mechmat.2010.10.003 ↗
22. Neutron and synchrotron radiation diffraction study of the matrix residual stress evolution with plastic deformation in aluminum alloys and composites10.1016/j.msea.2007.09.067 ↗
23. Micromechanical behavior and texture evolution of duplex stainless steel studied by neutron diffraction and self-consistent modeling10.1016/j.actamat.2007.10.040 ↗
24. A self-consistent mechanics of composite materials10.1016/0022-5096(65)90010-4 ↗
25. A study of residual stresses in Zircaloy-2 with rod texture10.1016/0956-7151(94)90191-0 ↗
26. Modeling lattice strain evolution at finite strains and experimental verification for copper and stainless steel using in situ neutron diffraction10.1016/j.ijplas.2010.03.005 ↗
27. Investigation of deformation mechanisms involved in the plasticity of AZ31 Mg alloy: in situ neutron diffraction and EPSC modelling10.1016/j.msea.2008.07.031 ↗
28. Modeling analysis of the influence of plasticity on high pressure deformation of hcp-Co10.1103/PhysRevB.79.064110 ↗
29. In-situ synchrotron X-ray diffraction deformation and EPSC modeling of AZ31 Mg alloy10.1016/j.msea.2018.10.008 ↗
30. Self-consistent modelling of the plastic deformation of F.C.C. polycrystals and its implications for diffraction measurements of internal stresses10.1016/S1359-6454(98)00014-7 ↗
31. Elastoplastic deformation of ferritic steel and cementite studied by neutron diffraction and self-consistent modelling10.1016/S1359-6454(02)00026-5 ↗
32. Modeling the room temperature deformation of a two-phase zirconium alloy10.1016/j.actamat.2008.09.020 ↗
33. Reorientation and stress relaxation due to twinning: modeling and experimental characterization for Mg10.1016/j.actamat.2008.01.057 ↗
34. Interactions between the phase stress and the grain-orientation-dependent stress in duplex stainless steel during deformation10.1016/j.actamat.2006.04.019 ↗
35. The determination of the elastic field of an ellipsoidal inclusion, and related problems
36. Transition theories of elastic-plastic deformation of metallic polycrystals10.1007/BF00789222 ↗
37. Elastoplasticity of micro-inhomogeneous metals at large strains10.1016/0749-6419(89)90027-2 ↗
38. Modeling of intra-crystalline hardening of materials with particles10.1016/S0749-6419(02)00015-3 ↗
39. The effects of thermal, plastic and elastic stress concentration on the overall behavior of metal matrix composites
40. In situ neutron measurements and modelling of the intergranular strains in the near-β titanium alloy Ti-β21S10.1016/j.actamat.2016.02.065 ↗
41. Micromechanical modelling of the elastoplastic behaviour of metallic material under strain-path changes10.1007/s00466-009-0374-7 ↗
42. Evolution of phase stresses in Al/SiCp composite during thermal cycling and compression test studied using diffraction and self-consistent models
43. Stress localisation in lamellar cementite and ferrite during elastoplastic deformation of pearlitic steel studied using diffraction and modelling10.1016/j.ijplas.2019.102651 ↗
44. Elastoplastic properties of duplex steel determined using neutron diffraction and self-consistent model10.1016/j.actamat.2003.10.046 ↗
45. Residual stress fields analysis in rolled Zircaloy-4 plates: grazing incidence diffraction and elastoplastic self-consistent model10.1016/j.actamat.2014.02.031 ↗
46. In situ neutron diffraction investigation of deformation twinning and pseudoelastic-like behaviour of extruded AZ31 magnesium alloy10.1016/j.ijplas.2008.08.002 ↗
47. Micromechanical behaviour of a two-phase Ti alloy studied using grazing incidence diffraction and a self-consistent model10.1016/j.actamat.2017.06.022 ↗
48. Study of the loading mode dependence of the twinning in random textured cast magnesium by acoustic emission and neutron diffraction methods10.1016/j.msea.2014.02.051 ↗
49. Deformation texture prediction: from the Taylor model to the advanced Lamel model10.1016/j.ijplas.2004.04.011 ↗
50. Neutron diffraction study of phase stresses in Al/SiCp composite during tensile test
51. Evolution of microstructure and residual stress during annealing of austenitic and ferritic steels10.1016/j.matchar.2015.12.019 ↗
52. Determination of the stress field in textured duplex steel using the TOF neutron diffraction method10.1016/j.actamat.2007.07.044 ↗
53. Fatigue-induced reversible/irreversible structural-transformations in a Ni-based superalloy10.1016/j.ijplas.2010.01.003 ↗
54. Application of inverse models and XRD analysis to the determination of Ti-17 β-phase coefficients of thermal expansion10.1016/j.scriptamat.2005.12.051 ↗
55. Determination of single-crystal elasticity constants in a cubic phase within a multiphase alloy: X-ray diffraction measurements and inverse-scale transition modelling10.1107/S0021889804023441 ↗
56. Residual stress and its role in failure10.1088/0034-4885/70/12/R04 ↗
57. Stress distribution correlated with damage in duplex stainless steel studied by synchrotron diffraction during plastic necking10.1016/j.matdes.2016.10.014 ↗
58. Measurements of thermal residual elastic strains in ferrite-austenite Fe-Cr-Ni alloys by neutron and X-ray diffractions10.1016/S1359-6454(98)00300-0 ↗
59. Examination of mechanical behaviour of aged duplex steel using X-ray and neutron diffraction methods
60. Elastoplastic properties of duplex steel determined using neutron diffraction and self-consistent model10.1016/j.actamat.2003.10.046 ↗
61. Residual stress field in steel samples during plastic deformation and recovery processes10.1080/14786435.2011.557401 ↗
62. Quantitative estimation of incompatibility stresses and elastic energy stored in ferritic steel10.1107/S0021889808023911 ↗
63. Operational texture analysis10.1016/0921-5093(91)90355-Q ↗
64. Deformation in an iron-30% chromium alloy aged at 475°c10.1016/0001-6160(67)90065-X ↗
65. Effect of 500 C aging on deformation behavior of iron-chromium alloy
66. Relationship between evolution of mechanical properties of various cast duplex stainless steels and metallurgical and aging parameters: outline of current EDF programmes10.1179/mst.1990.6.3.221 ↗
67. Aging embrittlement and lattice image analysis in a Fe-Cr-Ni duplex stainless steel aged at 400°C10.1016/0022-3115(94)90376-X ↗
68. Hardening contribution of G-phase nanoparticle precipitation and spinodal decomposition in aged duplex stainless steel studied by APT analysis and micro-hardness of ferrite10.1017/S1431927618011534 ↗
69. Totten · 2006
70. Characterization of the intermetallic G-phase in an AISI 329 duplex stainless steel10.1023/A:1018669217124 ↗
71. Kinetics of G-phase precipitation and spinodal decomposition in very long aged ferrite of a Mo-free duplex stainless steel10.1016/j.jnucmat.2015.06.017 ↗
72. Study of phase transformation and mechanical properties evolution of duplex stainless steels after long term thermal ageing (>20 years)10.1016/j.jnucmat.2011.01.036 ↗
73. Quantification of hardening contribution of G-Phase precipitation and spinodal decomposition in aged duplex stainless steel: APT analysis and micro-hardness measurements10.1016/j.jnucmat.2018.12.002 ↗
74. Total pattern fitting for the combined size-strain-stress-texture determination in thin film diffraction10.1016/j.nimb.2009.09.053 ↗
75. G-phase precipitation in duplex stainless steels after long-term thermal aging: a high-resolution transmission electron microscopy study10.1016/j.jnucmat.2014.05.069 ↗
76. Multifit/Polydefix: a framework for the analysis of polycrystal deformation using X-rays10.1107/S1600576715010390 ↗
77. Two-dimensional detector software: from real detector to idealised image or two-theta scan10.1080/08957959608201408 ↗
78. Hauk · 1997
79. Stress analysis of polycrystalline thin films and surface regions by X-ray diffraction10.1107/S0021889804029516 ↗
80. Simmons · 1971
81. The relation between macroscopic and microscopic strain hardening in F.C.C. polycrystals10.1016/0001-6160(84)90222-0 ↗
82. PAULING FILE in: inorganic solid phases, springer materials (online database)
83. Die Kristallstruktur des Mg6Si7Cu16