journal article·2021-01

Friction stir diffusion welding realized by a novel tool with turbo-like pin

Shude Ji, Xiao Sun, Zhongwei Ma, Peng Gong, Qi Wen

Publisher page

Abstract

Abstract The hook structure in friction stir lap welding (FSLW) joint is an undesirable structure due to its detrimental effect on tensile lap-shear strength (TLSS). For this reason, a friction stir diffusion welding (FSDW) technique realized by a series of specially designed tools with a turbo-like pin was put forward. 2024-T4 Al alloy with an alclad layer on the surface was chosen as the researched material. Different from the conventional FSLW joint, a basin-like stir zone and a flat bonding interface without hook structure are formed in the FSDW joint. A“turbocharging effect”is formed in the center region of the turbo-like pin, which promotes the material to flow downward and enhances the diffusion bonding at the lap interface. Two diffusion bonding mechanisms, including the heat affected zone bonding and the thermo-mechanically affected zone bonding, are formed at the lap interface. Adjusting the blade number and the plunge depth enables the transformation of these two bonding mechanisms. The joint fabricated by the turbo-like pin with four blades at the plunge depth of 1.3 mm has the maximum TLSS of 12.21 kN and fractures at the SZ edge of top sheet. The FSDW realized by the novel tool provides a new approach to acquiring a high-quality lap welding joint.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Factors affecting the properties of friction stir welded aluminum lap joints
2. Microstructure and mechanical properties of rafm - 316l dissimilar joints by friction stir welding with different butt joining modes10.1007/s40195-019-00951-x ↗
3. Recent progress on control strategies for inherent issues in friction stir welding10.1016/j.pmatsci.2020.100706 ↗
4. Microstructure and mechanical properties of Al/steel dissimilar welds fabricated by friction surfacing assisted friction stir lap welding10.1016/j.jmrt.2019.10.046 ↗
5. Effect of reverse-threaded pin on mechanical properties of friction stir lap welded alclad 2024 aluminum alloy10.1016/j.jmst.2016.03.005 ↗
6. Effect of hook characteristics on the fracture behaviour of dissimilar friction stir welded aluminium alloy and mild steel sheets10.1080/13621718.2018.1503801 ↗
7. Effect of pin length and rotation rate on the tensile strength of a friction stir spot-welded al alloy: a contribution to automated production10.1080/10426914.2011.585503 ↗
8. Microstructure and morphology evolution of probeless friction stir spot welded joints of aluminum alloy10.1016/j.jmatprotec.2017.09.003 ↗
9. Effect of process parameters on the macrostructure and defect formation in friction stir lap welding of AA5456 aluminum alloy10.1016/j.measurement.2015.08.001 ↗
10. Effect of pin length on hook size and joint properties in friction stir lap welding of 7B04 aluminum alloy10.1007/s11665-014-0936-5 ↗
11. Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy10.1016/j.matdes.2010.06.048 ↗
12. Effect of thread and rotating speed on material flow behavior and mechanical properties of friction stir lap welding joints10.1007/s11665-017-2928-8 ↗
13. Friction stir welding – recent developments in tool and process technologies10.1002/adem.200300355 ↗
14. Improving interface morphology and shear failure load of friction stir lap welding by changing material concentrated zone location10.1007/s00170-017-1508-2 ↗
15. Probe shape design for eliminating the defects of friction stir lap welded dissimilar materials10.1016/j.jmapro.2018.08.026 ↗
16. A novel friction stir diffusion bonding process using convex-vortex pin tools10.1016/j.jmst.2020.01.042 ↗
17. The effect of interface defect on mechanical properties and its formation mechanism in friction stir lap welded joints of aluminum alloys10.1016/j.jmatprotec.2016.06.029 ↗
18. Improving weld formability by a novel dual-rotation bobbin tool friction stir welding10.1016/j.jmst.2017.11.001 ↗
19. Friction stir welding characteristics of different heat-treated-state 2219 aluminum alloy plates10.1016/j.msea.2006.01.029 ↗
20. Joint features and mechanical properties of friction stir lap welded alclad 2024 aluminum alloy assisted by external stationary shoulder10.1016/j.matdes.2015.10.056 ↗
21. Internal defect and process parameter analysis during friction stir welding of Al 6061 sheets10.1007/s00170-012-4276-z ↗
22. Microstructure evolution in the conventional single side and bobbin tool friction stir welding of thick rolled 7085-T7452 aluminum alloy10.1016/j.matchar.2018.01.051 ↗
23. Abnormal fracture of 7085 high strength aluminum alloy thick plate joint via friction stir welding10.1016/j.jmrt.2019.09.077 ↗
24. Global anisotropic response of friction stir welded 2024 aluminum sheets10.1016/j.actamat.2015.03.054 ↗
25. Comparative study of 2060-T8 Al-Li alloy friction stir welded joints between natural cooling and water cooling
26. Micro friction stir welding of ultra-thin Al-6061 sheets10.1016/j.jmatprotec.2017.07.031 ↗