journal article·2020-10

High temperature mechanical properties and microstructure of hard TaSiN coatings

M.A. Monclús, L. Yang, I. López-Cabañas, M. Castillo-Rodríguez, A. Zaman, J. Wang, E.I. Meletis, R. González-Arrabal, J. Llorca, J.M. Molina-Aldareguía

Publisher page

Abstract

Room and high temperature mechanical properties of reactive magnetron sputtered TaSiN coatings were measured using nanoindentation (between 25C and 500C). Fracture toughness was also evaluated at a similar temperature range using the micropillar splitting method. The influence of the nitrogen concentration on the evolving phases and microstructure of the TaSiN coatings, before and after the high temperature testing, were examined by X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis. XRD spectra showed broad peaks with hexagonal $γ$-Ta2N as the main phase, with the cubic $δ$-TaN phase emerging for higher N contents. Phase composition remained unchanged before and after the 500C tests. However, after the high temperature tests, TEM analysis showed the presence of an oxide surface layer, with a thickness that decreased (from 42 to 15 nm) with N content, due to residual oxygen diffusion, which replaces nitrogen to form amorphous SiOx. Beneath the oxide-rich surface layer, coatings exhibited a stable nanocrystalline columnar microstructure. Hardness and fracture toughness increased with N content, initially due to the formation of an amorphous Si-N tissue at grain boundaries, and for even higher N contents, due to the appearance of the hard cubic $δ$-TaN phase. Hardness at 500C decreased only by 15%, while fracture toughness followed the opposite trend, due to increased plasticity with temperature. The optimum composition turned out to be Ta55Si10N35, which retained a hardness of 30 GPa at 500C, being also the toughest. These observations make this system very interesting for high temperature applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Thermal stability of nitride thin films10.1016/S0042-207X(00)00143-3 ↗
2. Zaman · 2017
3. Mechanical and tribological characterization of DC magnetron sputtered tantalum nitride thin films10.1016/S0257-8972(97)00338-1 ↗
4. Structural properties and corrosion resistance of tantalum nitride coatings produced by reactive DC magnetron sputtering10.1039/C6RA17869C ↗
5. Reactive sputter deposition and properties of TaxN thin films10.1016/S0167-9317(02)00801-8 ↗
6. Effect of composition on thermal stability and electrical resistivity of Ta-Si-N films10.1016/S0040-6090(99)01113-X ↗
7. Oxidation behavior of Ta e Si e N coatings10.1016/j.surfcoat.2017.09.087 ↗
8. Zeman · 2006 · vol. 200 · 4091
9. Chemical inertness of Ta – Si – N coatings in glass molding10.1016/j.tsf.2014.12.040 ↗
10. Characterization of Ta–Si–N coatings prepared using direct current magnetron co-sputtering10.1016/j.apsusc.2014.04.011 ↗
11. Phase composition and microstructure of polycrystalline and epitaxial TaN x layers grown on oxidized Si ( 001 ) and MgO ( 001 ) by reactive magnetron sputter deposition
12. Development of a complex heat resistant hard coating based on ( Ta , Si )
13. Microstructure and mechanical property investigation of TaSiN thin films deposited by reactive magnetron sputtering10.3390/coatings9050338 ↗
14. High-performance coatings for cutting tools10.1016/j.cirpj.2016.11.004 ↗
15. On the mechanism of intensified plasma-assisted processing10.1016/S0257-8972(96)02893-9 ↗
16. Tesmer · 1995
17. Study of the phases of iron-nitride with a stoichiometry near to FeN10.1016/j.nimb.2006.03.150 ↗
18. M. Mayer, SIMNRA, v 6.06, Max Plank Institut fur Plasmaphysik, (n.d.).
19. On the factors affecting the critical indenter penetration for measurement of coating hardness on the factors affecting the critical indenter penetration for measurement of coating hardness10.1016/j.vacuum.2008.11.007 ↗
20. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
21. Measurement of fracture toughness by nanoindentation methods
22. Ghidelli · 2017 · 1
23. Surface & Coatings Technology Residual stress evaluation at the micrometer scale : analysis of thin coatings by FIB milling and digital image correlation10.1016/j.surfcoat.2010.09.033 ↗
24. DC triode sputtering deposition and characterization of N-rich copper nitride thin films: role of chemical composition10.1016/j.jcrysgro.2008.07.051 ↗
25. Application of equilibrium thermodynamics to the development of diffusion barriers for copper metallization (invited)10.1016/S0167-9317(99)00303-2 ↗
26. Small-scale fracture toughness of ceramic thin films: the effects of specimen geometry, ion beam notching and high temperature on chromium nitride toughness evaluation10.1080/14786435.2016.1223891 ↗
27. Scripta Materialia High temperature fracture toughness of ceramic coatings evaluated using micro-pillar splitting10.1016/j.scriptamat.2018.11.013 ↗
28. Acta Materialia Overview on micro- and nanomechanical testing : new insights in interface plasticity and fracture at small length scales10.1016/j.actamat.2017.06.019 ↗
29. Hu · 2004 · vol. 468 · 183
30. Chung · 2004 · vol. 189 · 420
31. Hard nanocomposite coatings: thermal stability, oxidation resistance and toughness10.1016/j.surfcoat.2012.05.073 ↗
32. CRC handbook of chemistry and physics
33. Microstructure characterization of high-temperature, oxidation-resistant Si-B-C-N films10.1016/j.tsf.2013.07.013 ↗
34. The effect of Si content on the fracture toughness of CrAlN/Si3N4 coatings10.1063/1.4939758 ↗