Detwinning-twinning behavior during compression of face-centered cubic twin-matrix layered microstructure
Source abstract
Abstract
Abstract In this paper, we have examined the mechanical response of a face-centered cubic layered twin – matrix system, which has been generated in Cu–Al alloy single crystal. This kind of microstructure was obtained by specially designed uniaxial tension experiments of Cu-9at.%Al single crystals oriented for “easy” glide. It has been shown, that detwinning system, which operates along the twinning plane, may at specific crystallographic conditions totally dominate the process of plastic deformation. The detwinning system was activated in a confined area that creates a localized deformation regions in the form of kink bands that were found to be hierarchical in formation (i.e. higher order kinking within already existing kink bands). This mode of plastic deformation generates lattice rotation that was identified to occur around normal to the plane of shear of the active detwinning system. Hence, the paper gives direct experimental prove of the importance of detwinning systems on the mechanical properties and deformation texture analysis of face-centered cubic materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. On the reverse mode of fcc deformation twinning10.1016/j.actamat.2012.08.028 ↗
2. Reversible cyclic deformation mechanism of gold nanowires by twinning–detwinning transition evidenced from in situ TEM10.1038/ncomms4033 ↗
3. Experimental studies on detwinning of face-centered cubic deformation twins10.1016/j.actamat.2015.11.025 ↗
4. Deformation twinning and detwinning in face‐centered cubic metallic materials
5. Nucleation and thickening of shear bands in nano-scale twin/matrix lamellae of a Cu–Al alloy processed by dynamic plastic deformation10.1016/j.actamat.2010.01.049 ↗
6. On the first direct observation of de-twinning in a twinning-induced plasticity steel10.1016/j.actamat.2018.06.029 ↗
7. Experimental and self-consistent modeling study of de-twinning in a twinning-induced plasticity steel10.1007/s11837-019-03374-2 ↗
8. Reversible deformation in nanocrystalline TWIP steel during cyclic loading by partial slip reversal and detwinning10.1016/j.msea.2020.139251 ↗
9. EBSD based studies on various modes of cyclic deformation at 923 K in a type 316LN stainless steel10.1016/j.msea.2018.02.101 ↗
10. Scale law of complex deformation transitions of nanotwins in stainless steel10.1038/s41467-019-09360-1 ↗
11. In-situ neutron diffraction investigation on twinning/detwinning activities during tension-compression load reversal in a twinning induced plasticity steel10.1016/j.scriptamat.2018.03.017 ↗
12. In-situ neutron diffraction study on the tension-compression fatigue behavior of a twinning induced plasticity steel10.1016/j.scriptamat.2017.04.041 ↗
13. EBSD based studies on various modes of cyclic deformation at 923 K in a type 316LN stainless steel10.1016/j.msea.2018.02.101 ↗
14. Transformation of slip and twinning in tensile fcc single crystals of metals and alloys
15. Cyclic deformation behavior and related micro-mechanisms of a special CVD Ni processed with bimodal grain structures: ultrafine (UF) grains and large grains with UF/nano twins10.1016/j.actamat.2019.10.021 ↗
16. Detwinning mechanisms of growth twins in face-centered cubic metals10.1016/j.actamat.2009.12.013 ↗
17. Evolution of solidification defects in deformation of nano-polycrystalline aluminum10.1016/j.commatsci.2019.03.034 ↗
18. Detwinning through migration of twin boundaries in nanotwinned Cu films under in situ ion irradiation10.1080/14686996.2018.1428877 ↗
19. Grain size effect on deformation twinning and detwinning10.1007/s10853-013-7140-0 ↗
20. Deformation mechanisms in nanotwinned metal nanopillars10.1038/nnano.2012.116 ↗
21. Enhanced fatigue damage resistance of nanotwinned austenitic grains in a nanotwinned stainless steel10.1016/j.scriptamat.2017.04.011 ↗
22. Deformation mechanisms in an austenitic single-phase duplex microstructured steel with nanotwinned grains10.1016/j.actamat.2014.08.054 ↗
23. Microstructural modeling of the mechanical behavior of face-centered cubic nanocrystalline-twinned systems10.1007/s11661-018-5008-2 ↗
24. The transformation of slip dislocations during twinning of copper-aluminum alloy crystals10.1051/metal/199794091037 ↗
25. Detwinning of face-centered cubic deformation twins via the correspondence matrix approach10.1016/j.actamat.2015.09.020 ↗
26. Deformation twinning evolution from a single crystal in a face-centered-cubic ternary alloy10.1038/srep11290 ↗
27. Reversible twinning in pure aluminum10.1103/PhysRevLett.102.205504 ↗
28. Direct measurements of stacking-fault energies from observations of dislocation nodes10.1080/14786436108243372 ↗
29. Slip versus twinning in low and very low stacking-fault energy Cu-Al alloy single crystals10.1016/j.actamat.2017.05.011 ↗
30. Basinski · 1979 · vol. 4 · 261
31. Quantitative determination of secondary slip in copper single crystals deformed in tension10.1080/14786430310001612184 ↗
32. Quantitative determination of a change of dominant slip system in tensile FCC single crystals10.1088/1742-6596/240/1/012129 ↗
33. Growth twins and deformation twins in metals10.1146/annurev-matsci-070813-113304 ↗
34. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
35. Anderson · 2017
36. The theory of the crystallography of deformation twinning
37. Transformation of dislocations during twin variant reorientation in Ni-Mn-Ga martensite structures10.1016/j.scriptamat.2011.09.034 ↗
38. Mechanism of ortho kink-band formation in compressed zinc monocrystals10.1007/BF03398884 ↗