Microstructural and mechanical investigation of the near fusion boundary region in thermally aged 18MND5 / alloy 52 narrow-gap dissimilar metal weld
Source abstract
Abstract
Abstract Detailed characterization of the near fusion-boundary region of 18MND5/Alloy 52 dissimilar metal weld joints was performed to investigate the effect of thermal aging on the microstructure and mechanical properties and to quantify the diffusion of carbon into the weld metal. It was shown that the microstructural features of dissimilar metal welds, such as the size of the partially mixed zone in the weld and the adjacency to micro-segregations in the low-alloy steel have an effect on the peak carbon concentration in the enriched region of the weld. Aging conditions (time and temperature) influence the position of this concentration peak in the weld. Those trends were supported by thermodynamic calculations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Fabrication and characterization of graded transition joints for welding dissimilar alloys
2. H. Hänninen et al., ‘Dissimilar Metal Weld Joints and Their Performance in Nuclear Power Plant and Oil Refinery Conditions’, p. 212.
3. Mouginot · 2014 · vol. 15
4. Microstructural evolution and high temperature failure of ferritic to austenitic dissimilar welds10.1179/1743280412Y.0000000006 ↗
5. Carbon migration in 5Cr-0.5Mo/21Cr-12Ni dissimilar metal welds10.1007/s11661-998-0211-1 ↗
6. Microstructural and hardness investigations on a dissimilar metal weld between low alloy steel and Alloy 82 weld metal10.1016/j.matchar.2016.09.033 ↗
7. Effects of aging temperature on microstructural evolution at dissimilar metal weld interfaces10.1016/j.jnucmat.2015.03.044 ↗
8. ‘Effect of mechanical mismatch on fracture mechanical behavior of SA 508 – alloy 52 narrow gap dissimilar metal weld’10.1016/j.ijpvp.2017.08.003 ↗
9. Soares · 2007
10. VTT Technology 333: Thermal Ageing and Mechanical Performance of Narrow-Gap Dissimilar Metal Welds’, p. 193.
11. Microstructures and microhardness at fusion boundary of 316 stainless steel/Inconel 182 dissimilar welding10.1016/j.matchar.2015.07.018 ↗
12. Fracture mechanical characterisation of ferrite-austenite dissimilar metal welds (DMWs) for elevated temperature service in view of metallurgical mis-match
13. Microstructural characterization of alloy 52 narrow-gap dissimilar metal weld after aging
14. Effect of thermal aging on fracture mechanical properties and crack propagation behavior of alloy 52 narrow-gap dissimilar metal weld
15. Fracture mechanical and microstructural characterization of narrow-gap safe-end dissimilar metal weld
16. Fracture toughness in the ductile-brittle transition and thermal ageing behavior of decarburized heat affected zone of alloy 52 dissimilar metal welds of nuclear components
17. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
18. Growth morphologies and primary solidification modes in a dissimilar weld between a low-alloy steel and an austenitic stainless steel10.3390/met8040284 ↗
19. The consequences of macroscopic segregation on the transformation behaviour of a pressure-vessel steel
20. Naudin · 1999
21. Andrieu · 2013
22. Precipitation of M23C6 in austenitic steels10.1016/0001-6160(65)90053-2 ↗