journal article·2020-05

Study on microstructure, mechanical and tribological properties of as-cast LPSO-containing Mg96Zn2Y2 matrix composite reinforced with TiB2 nanoparticles

Rui Zhao, Jinshan Zhang, Wenqiang Guo, Longlong Zhang, Jiaxin Zhang, Chunxiang Xu

Publisher page

Abstract

Abstract In this work, the influence of TiB2 nanoparticles on microstructure, mechanical properties and tribological properties in the as-cast Mg96Zn2Y2 matrix composites containing 18R-LPSO (long-periodic stacking ordered) structure was investigated. Nano-TiB2/Mg96Zn2Y2 composites were fabricated by the combined process of powder mixtures compact extrusion and semi-solid stir casting. The results show that the appropriate TiB2 nanoparticles can significantly refine the microstructure, facilitate the precipitation of 18R-LPSO phase and optimize the growth pattern of 18R-LPSO and W phase. Meanwhile, the as-cast 1.5 wt%TiB2/Mg96Zn2Y2 composite with ultimate tensile strength (UTS) and elongation of 309 MPa and 16.2% exhibited better mechanical properties than that of matrix alloy with UTS and elongation of 175 MPa and 4.9%. In addition to traditional composites strengthening mechanisms, the synergistic strengthening effect (between TiB2 nanoparticles and 18R-LPSO phase) and the optimized growth pattern were also responsible for the excellent mechanical properties. Besides, the wear resistance of as-cast TiB2/Mg96Zn2Y2 composite is significantly improved under 5 N loading for 30 min, which was related to the enhanced hardness, work hardening ability and strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Strengthening mechanisms in magnesium alloys containing ternary I, W and LPSO phases10.1016/j.jmst.2017.12.005 ↗
2. Understanding the high strength and good ductility in LPSO-containing Mg alloy using synchrotron X-ray diffraction10.1007/s11661-018-4881-z ↗
3. Rapidly solidified powder metallurgy Mg97Zn1Y2 alloys with excellent tensile yield strength above 600 MPa10.2320/matertrans.42.1172 ↗
4. The contribution of long-period stacking-ordered structure (LPSO) to high strength-high ductility combination and nanoscale deformation behavior of magnesium-rare earth alloy10.1016/j.msea.2017.12.056 ↗
5. Effect of I (Mg3YZn6)-, W(Mg3Y2Zn3)- and LPSO(Mg12ZnY)-phases on tensile work-hardening and fracture behaviors of rolled Mg-Y-Zn alloys10.1016/j.jmrt.2019.04.016 ↗
6. Influence of micro-alloying with Cd on growth pattern, mechanical properties and microstructure of as-cast Mg94Y2.5Zn2.5Mn1 alloy containing LPSO structure10.1016/j.msea.2019.01.098 ↗
7. Effect of W-phase on the mechanical properties of as-cast Mg-Zn-Y-Zr alloys10.1016/j.jallcom.2007.07.096 ↗
8. Microstructure and mechanical properties of extruded Mg-Gd-Y-Zn alloy with Mn or Zr addition10.1007/s10853-019-03607-4 ↗
9. Fabrication of SiC particles-reinforced magnesium matrix composite by ultrasonic vibration10.1007/s10853-011-5780-5 ↗
10. Microstructure evolution and mechanical properties of Mg matrix composites reinforced with Al and nano SiC particles using spark plasma sintering followed by hot extrusion10.1016/j.jallcom.2017.07.159 ↗
11. Effect of in-situ (TiC-TiB2) reinforcement on aging and mechanical behavior of AZ91 magnesium matrix composite10.1016/j.matchar.2018.03.002 ↗
12. An investigation on grain refinement mechanism of TiB2 particulate reinforced AZ91 composites and its effect on mechanical properties10.1016/j.jallcom.2018.11.253 ↗
13. Enhancing overall tensile and compressive response of pure Mg using nano-TiB2 particulates10.1016/j.matchar.2014.05.021 ↗
14. Synthesis, characterization and mechanical properties of in-situ (TiC-TiB2) reinforced magnesium matrix composite10.1016/j.matdes.2016.07.024 ↗
15. A study on the combined effect of in-situ (TiC-TiB2) reinforcement and aging treatment on the yield asymmetry of magnesium matrix composite,10.1016/j.jallcom.2017.12.027 ↗
16. Effect of particle size on microstructure and mechanical properties of SiCp/AZ91 magnesium matrix composite10.1016/j.msea.2012.02.064 ↗
17. Effects of bimodal size SiC particles on the microstructure evolution and fracture mechanism of AZ91 matrix at room temperature10.1016/j.msea.2012.05.094 ↗
18. Effect of SiC reinforcement particles on the grain density in a magnesium-based metal–matrix composite: modelling and experiment10.1016/j.actamat.2012.01.058 ↗
19. Microstructural modification and its effect on strengthening mechanism and yield asymmetry of in-situ TiC-TiB2/AZ91 magnesium matrix composite10.1016/j.msea.2018.03.060 ↗
20. Fabrication of TiC particulate reinforced magnesium matrix composites10.1016/S1359-6462(02)00551-1 ↗
21. Fabrication and characterization of an actively protective Mg-Al LDHs/Al2O3 composite coating on magnesium alloy AZ3110.1016/j.apsusc.2019.05.115 ↗
22. Hierarchical magnesium nano-composites for enhanced mechanical response10.1016/j.actamat.2010.07.028 ↗
23. Enhancing strength and ductility of magnesium by integrating it with aluminum nanoparticles10.1016/j.actamat.2007.07.039 ↗
24. Properties and deformation behaviour of Mg-Y2O3 nanocomposites10.1016/j.actamat.2007.05.032 ↗
25. Improving mechanical properties of magnesium using nano-yttria reinforcement and microwave assisted powder metallurgy method10.1016/j.compscitech.2007.03.006 ↗
26. Effects of in situ TiB2 particle on microstructures and mechanical properties of AZ91 alloy10.1016/j.jallcom.2009.10.103 ↗
27. Critically designing today's melt processed bulk magnesium alloys using boron rich nanoparticles10.1016/j.matdes.2014.03.015 ↗
28. Processing, microstructure and ageing behavior of in-situ submicron TiB2 particles reinforced AZ91 Mg matrix composites10.1016/j.jallcom.2018.05.351 ↗
29. High strength Mg-Zn-Y alloys reinforced synergistically by Nano-SiCp and long period stacking ordered structure10.1016/j.msea.2019.138284 ↗
30. Effects of doping atoms on the generalized stacking-fault energies of Mg alloys from first-principles calculations10.1016/j.scriptamat.2013.05.026 ↗
31. Stacking faults in Zr(Fe, Cr)2 Laves structured secondary phase particle in Zircaloy-4 alloy10.1039/C7NR08963E ↗
32. Phase equilibria and transformations in ternary Mg-rich Mg-Y-Zn alloys10.1016/j.actamat.2012.05.035 ↗
33. Experimental study on phase equilibria in the vicinity of X, W and H phases in the Mg-Zn-Y ternary system10.2320/matertrans.MI201209 ↗
34. Solidification behavior of cast TiB2 particulate reinforced Mg composites10.1016/j.msea.2007.05.055 ↗
35. Effect of boron addition on microstructure and mechanical properties of TiC/Ti6Al4V composites10.1016/j.matdes.2011.10.040 ↗
36. Microstructure, mechanical properties and strengthening mechanisms of Mg matrix composites reinforced with in situ nanosized TiB2 particles10.1016/j.msea.2017.10.107 ↗
37. Dislocation structure in rapidly solidified Mg97Zn1Y2 alloy with long period stacking order phase10.2320/matertrans.46.361 ↗
38. The 18R and 14H long-period stacking ordered structures in Mg-Y-Zn alloys,10.1016/j.actamat.2010.01.022 ↗
39. Friction stir processing of QE22 magnesium alloy to achieve ultrafine-grained microstructure with enhanced room temperature ductility and texture weakening10.1016/j.matchar.2018.11.020 ↗
40. Achievement of fine-grained bimodal microstructures and superior mechanical properties in a multi-axially forged GWZ magnesium alloy containing LPSO structures10.1016/j.jallcom.2019.04.158 ↗
41. First-principles calculations and thermodynamic modelling of long periodic stacking ordered (LPSO) phases in Mg-Al-Gd10.1016/j.mtla.2018.09.013 ↗
42. Tribological behavior of pure Mg and AZ31 magnesium alloy strengthened by Al2O3 nano-particles10.1016/j.wear.2009.08.031 ↗
43. Tribological behavior of in-situ nanosized TiB2 particles reinforced AZ91 matrix composite10.1016/j.triboint.2018.07.003 ↗
44. Tribological effects of carbon nanotubes on magnesium alloy AZ31 and analyzing aging effects on CNTs/AZ31 composites fabricated by stir casting process10.1016/j.triboint.2019.105982 ↗
45. Effect of improving Fe2B toughness by chromium addition on the two-body abrasive wear behavior of Fe-3.0wt% B cast alloy10.1016/j.triboint.2016.05.009 ↗
46. High-strength Al0.2Co1.5CrFeNi1.5Ti high-entropy alloy produced by powder metallurgy and casting: a comparison of microstructures, mechanical and tribological properties, Mater