Comprehensive structural and mechanical characterization of in-situ Al–Al3Ti nanocomposite modified by heat treatment
Source abstract
Abstract
Abstract Aluminum-Al3Ti reinforced MMCs were produced with a large amount (up to ~30 vol%) of Al3Ti phase via mechanical alloying, hot extrusion and heat treatment (as a supplementary process) of the Al–Ti elemental powder mixture, respectively. Samples in each stage were studied precise and comprehensive by field emission electron microscope, energy dispersive spectroscopy, X-ray diffraction, differential scanning calorimetry, densitometry, macro and micssro hardness, nanoindentation and tensile tests. The results indicated that after 4-h vibratory milling, the aluminum crystallite size reached 63 nm and Al3Ti phase formed in powder mixture. After hot extrusion, the volume percentage of Al3Ti increased by the formation of new Al3Ti nanoparticles, and a densed structure was achieved. As the milling time increased and crystallite and particle sizes of aluminum and titanium become smaller, the mechanical behavior of the hot extruded nanocomposites was improved. After heat treatments, the amount of Al3Ti phase significantly increased, and by thickening the Al3Ti layers around the titanium microparticles at high temperatures and long time periods, the voids in the structure proliferated. Increase in Al3Ti content can improve the mechanical properties, provided that volume exchanges originating from its formation do not cause widespread formation of voids in the structure. Mechanical properties varied as a function of aluminum and titanium crystallite and particle sizes and amount of Al3Ti phase and voids in the final samples. Aluminum crystallites growth during heat treatment reduces the hardness and increases the matrix ductility, and reinforcement particles growth brings faster failure for the samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. P/M aluminum matrix composites: an overview10.1016/S0924-0136(02)00234-0 ↗
2. Metal matrix composites reinforced by nano-particles—a review
3. Reviews on the influences of alloying elements on the microstructure and mechanical properties of aluminum alloys and aluminum alloy composites
4. Aluminium reinforced by WC and TiC nanoparticles (ex-situ) and aluminide particles (in-situ): microstructure, wear and corrosion behaviour10.1016/j.matdes.2014.08.040 ↗
5. Mechanical properties and tribological behavior of aluminum matrix composites reinforced with in-situ AlB2 particles10.1016/j.triboint.2016.01.046 ↗
6. Strengthening behavior of in situ-synthesized (TiC–TiB)/Ti composites by powder metallurgy and hot extrusion10.1016/j.matdes.2016.01.092 ↗
7. Effect of powder particle shape on the properties of in situ Ti–TiB composite materials produced by selective laser melting10.1016/j.jmst.2015.08.007 ↗
8. In situ synthesis of TiC nano-reinforcements in aluminum matrix composites during mechanical alloying10.1016/j.compositesb.2018.02.023 ↗
9. Aluminum-based cast in situ Composites : a review10.1007/s11665-015-1424-2 ↗
10. The formation and evolution mechanism of amorphous layer surrounding Nb nano-grains in Nb-Al system during mechanical alloying process10.1016/j.jallcom.2018.11.135 ↗
11. Microstructural characterization and tribocorrosion behaviour of Al/Al3Ti and Al/Al3Zr FGMs10.1016/j.wear.2011.02.007 ↗
12. Fabrication of high wear resistant Al/Al3Ti metal matrix composite by in situ hot press method, Mater
13. Comparative study of Al-TiAl composites with different intermetallic volume fractions and particle sizes10.1016/j.intermet.2004.07.033 ↗
14. Preparation of Al-Al3Ti in situ composites by direct reaction method10.1016/S1001-0521(06)60010-7 ↗
15. Evolution of microstructure and mechanical properties of Al-5wt% Ti composite fabricated by P/M and hot extrusion: effect of heat treatment10.1016/j.msea.2017.02.049 ↗
16. –(L12)Al3Ti nanocomposites prepared by mechanical alloying: synthesis and mechanical properties10.1016/j.jallcom.2009.10.274 ↗
17. Al–Al3Ti nanocomposites produced in situ by friction stir processing10.1016/j.actamat.2006.06.054 ↗
18. Ultrafine-grained Al composites reinforced with in-situ Al3Ti filaments10.1016/j.msea.2016.01.047 ↗
19. Fabrication of high strength in-situ Al-Al3Ti nanocomposite by mechanical alloying and hot extrusion: investigation of fracture toughness10.1016/j.msea.2016.02.010 ↗
20. TiB2 reinforced aluminum based in situ composites fabricated by stir casting10.1016/j.msea.2014.12.033 ↗
21. Synthesis of Al-Al3Ti in situ metal matrix composites by salt route and evaluation of their mechanical properties10.4028/www.scientific.net/AMR.984-985.280 ↗
22. Understanding the evolution of microstructural features in the in-situ intermetallic phase reinforced Al/Al3Ti nanocomposite, Mater
23. Production of a high strength Al/(TiAl3+Al2O3) composite from an Al-TiO2 system by accumulative roll-bonding and spark plasma sintering10.1016/j.msea.2019.03.012 ↗
24. On the fracture toughness behavior of in-situ Al-Ti composites produced via mechanical alloying and hot extrusion10.1016/j.jallcom.2016.04.111 ↗
25. Mechanically alloyed AlN particle-reinforced Al-6061 matrix composites: powder processing, consolidation and mechanical strength and hardness of the as-extruded materials10.1016/j.msea.2006.03.074 ↗
26. Thermomechanical synthesis of hybrid in-situ Al-(Al3Ti+Al2O3) composites through nanoscale Al-Al2TiO5 reactive system10.1016/j.jallcom.2019.03.054 ↗
27. Micro structural features and mechanical properties of Al–Al3Ti composite fabricated by in-situ powder metallurgy route10.1016/j.jallcom.2008.05.068 ↗
28. Formation mechanism of in situ Al3Ti in Al matrix during hot pressing and subsequent friction stir processing10.1016/j.matchemphys.2011.08.042 ↗
29. Production of Al–Al3Ti powders by mechanical alloying and annealing10.1179/174329005X78121 ↗
30. The Kirkendall void formation in Al/Ti interface during solid-state reactive diffusion between Al and Ti10.1016/j.surfin.2017.09.013 ↗
31. Cui · 2012 · vol. 72 · 1423
32. Vol · 2006 · vol. 25 · 32
33. Design, microstructure and high temperature properties of in-situ Al3Ti and nano-Al2O3 reinforced 2024Al matrix composites from Al-TiO2 system10.1016/j.jallcom.2018.09.376 ↗
34. In-situ synthesis of Al3Ti particles reinforced Al-based composite coating10.1016/S1003-6326(11)61330-7 ↗
35. Microstructure-hardness relationship of Al–(L12) Al3Ti nanocomposites prepared by rapid solidification processing10.1016/j.intermet.2009.09.009 ↗
36. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
37. Investigation of aluminum-based nanocomposites with ultra-high strength10.1016/j.msea.2009.07.067 ↗
38. Transition of tensile deformation behaviors in ultrafine-grained aluminum10.1016/j.actamat.2005.05.005 ↗
39. The strengthening effect of Al3Ti in high temperature deformation of Al–Al3Ti composites10.1016/S1359-6454(97)00470-9 ↗
40. A review on hot extrusion of Metal Matrix Composites (MMC's)
41. Effect of extrusion and particle volume fraction on the mechanical properties of SiC reinforced Al–Cu alloy composites10.1016/j.msea.2010.07.017 ↗
42. A new method for fabrication of in situ Al/Al3Ti–Al2O3 nanocomposites based on thermal decomposition of nanostructured tialite10.1016/j.jallcom.2015.04.145 ↗
43. Thermal decomposition of nanostructured Aluminum Titanate in an active Al matrix: a novel approach to fabrication of in situ Al/Al2O3–Al3Ti composites10.1016/j.matdes.2015.09.050 ↗
44. Dry sliding tribological behavior and mechanical properties of Al2024–5wt.%B4C nanocomposite produced by mechanical milling and hot extrusion10.1016/j.matdes.2013.09.024 ↗
45. Nanoindentation studies of ex situ AlN/Al metal matrix nanocomposites10.1016/j.jallcom.2013.12.239 ↗
46. Micro- and nanoindentation techniques for mechanical characterisation of materials10.1179/174328006X102475 ↗
47. Grain size dependence of mechanical properties in nanocrystalline selenium10.1557/JMR.1997.0132 ↗
48. Fracture behavior of particle reinforced metal matrix composites10.1016/j.compositesa.2007.10.018 ↗
49. The influence of microstructure on the fracture behaviour of particulate metal matrix composites10.1016/0921-5093(91)90566-6 ↗
50. Tensile and fracture toughness properties of SiCp reinforced Al alloys: effects of particle size, particle volume fraction, and matrix strength10.1361/10599490421358 ↗
51. Formation of La-modified L12–Al3Ti by mechanical alloying and annealing10.1016/j.matchar.2007.03.003 ↗
52. A novel approach to the fabrication of lamellar Al2O3/6061Al composites with high-volume fractions of hard phases10.1016/j.msea.2019.03.065 ↗
53. Material dimensionality effects on the nanoindentation behavior of Al/a-Si core-shell nanostructures10.1016/j.apsusc.2017.03.221 ↗
54. Nano-indentation behavior of layered ultra-fine grained AA8006 aluminum alloy and AA8006-B4C nanostructured nanocomposite produced by accumulative fold forging process10.1016/j.msea.2018.12.013 ↗
55. Nanoindentation studies of materials10.1016/S1369-7021(06)71495-X ↗
56. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗