Delineating hardening contributions of secondary and tertiary γ′ particles in an aged Alloy 693
Source abstract
Abstract
Abstract Bi-modal and tri-modal distribution of γ′ particles in Alloy 693 can be produced by inducing the precipitation of different generations of particles during slow cooling after an annealing treatment. In the present work, an attempt has been made to quantify hardening contributions of different generations of particles and to identify change in the dominant hardening mechanism when particle distribution changes from mono-modal to multi-modal. This has been carried out by first establishing a functional dependence of the hardening behaviour of mono-dispersed (first generation) particles on their size and volume fraction to identify particle size range for different hardening mechanisms. Governing hardening mechanisms were validated by transmission electron microscopy on the basis of experimentally observed interaction of dislocations with precipitate particles. Functional dependence of first generation particles has been utilized to identify hardening mechanisms and contributions of later generations of particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Hattendorf · 2017
2. Phase-field modeling of bimodal microstructures in nickel-based superalloys10.1016/j.actamat.2008.10.039 ↗
3. Heat treatment of UDIMET 720Li: the effect of microstructure on properties10.1016/S0921-5093(98)00867-3 ↗
4. Precipitation behaviour of γ′ phase in Alloy 69310.1016/j.matchar.2016.07.007 ↗
5. Multimodal size distributions of γ′ precipitates during continuous cooling of UDIMET 720 Li10.1016/j.actamat.2009.08.002 ↗
6. Influence of cooling rate on the development of multiple generations of γ′ precipitates in a commercial nickel base superalloy10.1016/j.matchar.2011.06.002 ↗
7. Brittle failure of Alloy 693 at elevated temperatures10.1016/j.msea.2014.08.015 ↗
8. Reed · 2006
9. Superposition of solid solution and particle strengthening in (Cu-Au)-Co single crystals10.1016/0001-6160(80)90090-5 ↗
10. The effect of prestressing on the strength of neutron-irradiated copper single crystals10.1063/1.1753962 ↗
11. Age hardening behaviour of Alloy 69310.1016/j.msea.2017.04.109 ↗
12. Some new aspects concerning particle hardening mechanisms in γ’ precipitating Ni-base alloys-I. Theoretical concept10.1016/0001-6160(82)90048-7 ↗
13. Some new aspects concerning particle hardening mechanisms in γ’ precipitating nickel-base alloys-II10.1016/0001-6160(82)90049-9 ↗
14. Dynamic simulation of solution hardening10.1063/1.324413 ↗
15. On the presence of super lattice intrinsic stacking faults in plastically deformed Ni3Al
16. High temperature materials for aerospace and industrial power
17. Strengthening mechanisms in γ′ precipitating alloys10.1179/msc.1970.4.1.121 ↗
18. Brown · 1971
19. Precipitation hardening10.1007/BF02670416 ↗
20. Interaction of dislocations with coherent, stress-free ordered particles
21. Order hardening of MgO by large precipitated volume fractions of spinel particles10.1016/0025-5416(79)90063-6 ↗
22. On the relationship between uniaxial yield strength and resolved shear stress in polycrystalline materials10.1016/S0022-3115(00)00378-0 ↗
23. Experimental investigation into the relation between γ′ particle dispersion and the yield stress of PE 1610.1016/0025-5416(78)90080-0 ↗
24. Lattice parameter instabilities during multi-phase precipitation in Alloy 69310.1016/j.jallcom.2017.01.042 ↗