Termination of local strain concentration led to better tensile ductility in multilayered 2N/4N Al sheet
Source abstract
Abstract
Abstract Multilayered aluminum composites (ARB6-2N/4 N) with alternating layers of commercially purity aluminum (2N–Al) and high-purity aluminum (4N–Al) were fabricated by six cycles of accumulative roll bonding (ARB) processing. The ARB processed specimens were annealed at different temperatures. It was found that heterogeneous lamellar microstructures composed of fine-grained 2 N (hard) layers and coarse-grained 4 N (soft) layers formed in the specimens. The specimen with the heterogeneous layered structure showed a large tensile elongation with a strength following the rule of mixture. Digital image correlation analyses revealed that the deformation bands with high local strains formed in the 4 N layers but were terminated at the interfaces between the 2 N and the 4 N layers in the multilayered aluminum composites, accommodating the deformation between the hard (2 N) layers and the soft (4 N) layers during tensile deformation. Termination of the strain localization delayed macroscopic necking of the materials, leading to a better combination of high strength and good ductility in the multilayered aluminum composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. High strength and high ductility of ultrafine-grained, interstitial-free steel produced by ECAE and annealing10.1007/s11661-011-1063-7 ↗
2. Ultra-fine grained bulk steel produced by accumulative roll-bonding (ARB) process10.1016/S1359-6462(99)00015-9 ↗
3. Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process10.1016/S1359-6462(98)00302-9 ↗
4. EBSD and TEM characterization of ultrafine grained high purity aluminum produced by accumulative roll-bonding
5. Microstructure and mechanical properties of ARB processed aluminium with different purities10.2320/matertrans.MH201519 ↗
6. Mechanical properties of copper/bronze laminates: role of interfaces10.1016/j.actamat.2016.06.023 ↗
7. Interface affected zone for optimal strength and ductility in heterogeneous laminate10.1016/j.mattod.2018.03.006 ↗
8. High-strength and thermally stable bulk nanolayered composites due to twin-induced interfaces10.1038/ncomms2651 ↗
9. Work hardening in ultrafine-grained titanium: multilayering and grading10.1016/j.actamat.2013.01.018 ↗
10. High strength and thermal stability of bulk Cu/Ta nanolamellar multilayers fabricated by cross accumulative roll bonding10.1016/j.actamat.2016.03.034 ↗
11. Interface-driven microstructure development and ultra high strength of bulk nanostructured Cu-Nb multilayers fabricated by severe plastic deformation10.1557/jmr.2013.21 ↗
12. Investigation of structure and mechanical properties of multi-layered Al/Cu composite produced by accumulative roll bonding (ARB) process10.1016/j.compscitech.2008.02.029 ↗
13. Evaluation of mechanical properties and structure of multilayered Al/Ni composites produced by accumulative roll bonding (ARB) process10.1016/j.jallcom.2009.09.022 ↗
14. Enhanced fatigue lives in AA1050A/AA5005 laminated metal composites produced by accumulative roll bonding10.1016/j.actamat.2016.08.039 ↗
15. Improving sustainability with simpler alloys10.1126/science.aaw9905 ↗
16. Mechanical properties of aluminium laminates produced by accumulative roll bonding10.1002/crat.201300121 ↗
17. Confined recrystallization of high-purity aluminium during accumulative roll bonding of aluminium laminates10.1016/j.actamat.2012.04.004 ↗
18. Global and local strain rate sensitivity of bimodal Al-laminates produced by accumulative roll bonding10.1016/j.actamat.2015.11.009 ↗
19. Microstructure of accumulative roll bonded high purity aluminium laminates10.1016/j.mtla.2019.100236 ↗
20. Novel thermomechanical processing methods for achieving ultragrain refinement of low-carbon steel without heavy plastic deformation10.1080/21663831.2016.1208301 ↗
21. Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed10.1016/j.actamat.2009.05.017 ↗
22. Quantification of annealed microstructures in ARB processed aluminum10.1016/j.actamat.2006.02.046 ↗
23. Mechanical behavior and microstructural evolution upon annealing of the accumulative roll-bonding (ARB) processed Al alloy 110010.1016/j.msea.2007.07.022 ↗
24. Microstructure and texture evolution during annealing a cryogenic-SPD processed Al-alloy with a nanoscale lamellar HAGB grain structure10.1016/j.actamat.2009.04.010 ↗
25. Developing stable fine–grain microstructures by large strain deformation10.1098/rsta.1999.0395 ↗
26. Effect of ARB process on textural evolution of AA1100 aluminum alloy10.1016/j.msea.2010.07.089 ↗
27. Shear banding and recrystallization texture development in a multilayered Al alloy sheet produced by accumulative roll bonding10.1016/j.actamat.2008.08.056 ↗
28. Effects of micro flexible rolling and annealing on microstructure, microhardness and texture of aluminium alloy10.1016/j.matchar.2018.12.007 ↗
29. Effects of grain size and dislocation density on strain hardening behavior of ultrafine grained AA1050 processed by accumulative roll bonding10.1016/j.jallcom.2015.11.032 ↗
30. Microstructure and mechanical properties of ultra-fine grains (UFGs) aluminum strips produced by ARB process10.1016/j.jallcom.2008.06.161 ↗
31. Development of through-thickness texture gradient and persistence of shear-type textures during annealing of commercial purity aluminium sheet processed by accumulative roll-bonding10.1016/j.jmst.2017.04.019 ↗
32. Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing10.1016/S1359-6462(02)00282-8 ↗
33. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
34. Plastic deformation and fracture of ultrafine-grained Al–Mg alloys with a bimodal grain size distribution10.1016/j.actamat.2005.11.044 ↗
35. Controlled annealing of sandwich-structured aluminum AA1050 for optimized combinations of strength and ductility10.1016/j.msea.2018.07.065 ↗
36. Strain hardening and ductility in a coarse-grain/nanostructure laminate material10.1016/j.scriptamat.2015.03.006 ↗
37. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
38. Fabricating interstitial-free steel with simultaneous high strength and good ductility with homogeneous layer and lamella structure10.1016/j.scriptamat.2017.06.044 ↗
39. Multiscale interfacial structure strengthening effect in Al alloy laminated metal composites fabricated by accumulative roll bonding10.1016/j.msea.2019.138354 ↗
40. Extraordinary strain hardening by gradient structure10.1073/pnas.1324069111 ↗
41. Heterostructure induced dispersive shear bands in heterostructured Cu10.1016/j.scriptamat.2019.05.036 ↗
42. Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure10.1016/j.actamat.2018.12.012 ↗
43. Additional hardening in harmonic structured materials by strain partitioning and back stress10.1080/21663831.2018.1439115 ↗
44. Role of layered structure in ductility improvement of layered Ti-Al metal composite10.1016/j.actamat.2018.05.005 ↗
45. Micromechanical analysis of martensite distribution on strain localization in dual phase steels by scanning electron microscopy and crystal plasticity simulation10.1016/j.msea.2016.05.094 ↗