journal article·2020-03

Interfacial microstructure and mechanical properties of the superplastically joined TiO2-doped ZTA ceramics

Yufei Zu, Kang Wang, Shasha Lv, Guoqing Chen, Xuesong Fu, Wenlong Zhou

Publisher page

Abstract

Abstract The superplastic joining experiments of the x wt.% TiO2-doped ZTA (zirconia toughened alumina) composite ceramics (x = 0, 1, 4 and 8) were conducted at 1300 °C in this study. The interfacial microstructures showed that, with the increase of the TiO2 amount, the macro/micro-sized cavities, cracks, and the welding line at the joined interface were reduced gradually and finally eliminated. Moreover, the shear strength and joint efficiency of the ZTA joints were enhanced from 21.2 MPa/8.8% to 74.5 MPa/29.9%, 145.6 MPa/64.2% and 187.6 MPa/92.0% by doping 1 wt%, 4 wt% and 8 wt% TiO2 dopant, respectively. Based on the interfacial microstructure and fracture microtopography of the TiO2-doped ZTA joints, the results were discussed in terms of the relationship between fracture mode and TiO2 amount.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Low-temperature preparation of Al2O3-ZrO2 nanoceramics via pressureless sintering assisted by amorphous powders10.1016/j.jallcom.2018.12.372 ↗
2. Microstructure and mechanical properties of 5.8 GHz microwave-sintered ZrO2/Al2O3 ceramics10.1016/j.ceramint.2019.06.026 ↗
3. Microstructure and mechanical properties of hot-pressed Al2O3-mullite-ZrO2-SiC composites10.1016/j.msea.2018.10.118 ↗
4. Microstructure and properties of Al2O3(n)/ZrO2 dental ceramics prepared by two-step microwave sintering10.1016/j.matdes.2014.10.054 ↗
5. Experimental study on impact resistance and mechanical characteristics of low-temperature sintered Al2O3-ZrO2 composites with anti-sandwich structure10.1016/j.powtec.2014.02.018 ↗
6. Plastic deformation of hydroxyapatites and its application to joining10.1111/j.1744-7402.2005.02024.x ↗
7. Superplastic joining of 3Y-TZP10.1016/j.jeurceramsoc.2005.07.045 ↗
8. Ultrafast joining of zirconia ceramics using electric field at low temperatures10.1016/j.jeurceramsoc.2019.04.023 ↗
9. Microstructure and mechanical properties of Ti3SiC2/Ti3SiC2 diffusion bonded joints using Ti foil as an interlayer10.1016/j.ceramint.2019.07.079 ↗
10. Microstructure and mechanical strength of Ti3AlC2 joints bonded using oxides as interlayer10.1016/j.ceramint.2019.05.282 ↗
11. Effect of alloying elements gradient on solid-state diffusion bonding between aerospace aluminum alloys10.3390/ma11081446 ↗
12. Microstructural evolution and growth kinetics of interfacial compounds in TiAl/Ti3SiC2 diffusion bonding joints10.1016/j.msea.2019.04.034 ↗
13. Brazing silicon nitride to an iron-based intermetallic using a copper interlayer10.1016/j.ceramint.2003.10.011 ↗
14. Development of SiC-SiC joint by reaction bonding method using SiC/C tapes as the interlayer10.1016/j.jeurceramsoc.2012.04.049 ↗
15. Interfacial zone surrounding the diamond in reaction bonded diamond/SiC composites: interphase structure and formation mechanism10.1016/j.jeurceramsoc.2019.08.019 ↗
16. Joining mechanism in Si3N4 bonded with a Ni-Cr-B interlayer10.1016/S0955-2219(02)00100-0 ↗
17. Microstructure and mechanical strength of diffusion-bonded silicon nitride-molybdenum joints10.1016/S0955-2219(99)00027-8 ↗
18. Joining of alumina with an alumina-zirconia insert under low mechanical pressure10.1016/j.jascer.2014.10.010 ↗
19. Microstructure and properties of ceramics and composites joined by plastic deformation10.1016/j.msea.2007.11.149 ↗
20. Superplastic joining of alumina and zirconia ceramics10.1016/j.jeurceramsoc.2006.05.055 ↗
21. Self-joining of zirconia/hydroxyapatite composites using plastic deformation process10.1016/j.actbio.2006.06.004 ↗
22. Joining of engineering ceramics10.1179/174328009X461078 ↗
23. High strain rate superplasticity in oxide ceramics
24. Microstructure and superplastic behavior of TiO2-doped Al2O3-ZrO2 (3Y) composite ceramics10.1016/j.msea.2012.05.079 ↗
25. Liquid phase assisted superplastic deformation of TiO2-Doped ZTA ceramics10.3390/ma12132050 ↗
26. Effects of liquid phases on densification of TiO2-doped Al2O3-ZrO2 composite ceramics10.1016/j.ceramint.2013.08.049 ↗
27. Effects of TiO2 addition on the phase, mechanical properties, and microstructure of zirconia-toughened alumina ceramic composite10.1016/j.ceramint.2014.11.080 ↗