journal article·2020-03Open access

In-situ investigation via high energy X-ray diffraction of stress-induced(0002)α→(110)β transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr alloy

Duoduo Wang, Qunbo Fan, Ran Shi, Yu Zhou, Haichao Gong, Liang Wang, Yunfei Xue, Yang Ren

Abstract

Abstract The deformation and load partitioning mechanisms among phases are critical to the detailed understanding of heterogeneous stress distributions at the submicron scale during the process of elastic-plastic transformation in dual-phase (α+β) titanium alloys. Therefore, in this work, a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr titanium alloy was investigated via in-situ high energy X-ray diffraction. We examined the evolution of the lattice strain, peak intensity, and full width at half maximum under uniaxial tensile loading at room temperature. The results indicated that the stress-induced (0002)α→(110)β transformation can be preferentially initiated for lattice strains of 702 × 10−6–1500 × 10−6 and 592 × 10−6–1355 × 10−6 during the elastic loading stage of the {0002}α and {110}β reflections, respectively. In addition, various dog-bone-shaped specimens with interrupted strain amplitudes (0.3%, 3%, 5% and 8.5%) were characterized via transmission electron microscopy. The corresponding selected area electron diffraction pattern confirmed the occurrence of a (0002)α//(110)β Burgers orientation relationship when the alloy was subjected to a strain of e = 0.3%. Furthermore, the results revealed that the anisotropic non-linear response of specific reflections (i.e., the (0002)α and (110)β reflections) will cause a phase transformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. An experimental investigation into the micro-mechanics of spall initiation and propagation in Ti-6Al-4V during shock loading10.1016/j.msea.2013.04.055 ↗
2. Microstructure design and mechanical properties in a near-α Ti-4Mo alloy10.1016/j.actamat.2015.06.043 ↗
3. Dependence of mechanical properties on the microstructural parameters of TA15 titanium alloy with tri-modal microstructure10.1016/j.msea.2018.10.030 ↗
4. In-situ investigation of quenching and partitioning by High Energy X-Ray Diffraction experiments10.1016/j.scriptamat.2016.12.026 ↗
5. The development of synchrotron X-ray diffraction at Daresbury Laboratory and its legacy for materials imaging10.1016/j.jnoncrysol.2016.05.014 ↗
6. Understanding the deformation mechanism of individual phases of a dual-phase beta type titanium alloy using in situ diffraction method10.1016/j.msea.2018.05.017 ↗
7. Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase γ-TiAl based alloy10.1016/j.actamat.2018.07.062 ↗
8. Determination of polycrystal diffraction elastic constants of Ti-2.5Cu by using in situ tensile loading and synchrotron radiation10.1016/j.msea.2013.11.053 ↗
9. Evolution of lattice strain in Ti-6Al-4V during tensile loading at room temperature10.1016/j.actamat.2008.08.030 ↗
10. Mechanical stability of individual austenite grains in TRIP steel studied by synchrotron X-ray diffraction during tensile loading10.1016/j.msea.2014.09.008 ↗
11. Synchrotron study on load partitioning between ferrite/martensite and nanoparticles of a 9Cr ODS steel10.1016/j.jnucmat.2014.06.060 ↗
12. An in situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels10.1016/j.actamat.2009.05.002 ↗
13. Tracking the aʺ martensite decomposition during continuous heating of a Ti-6Al-6V-2Sn alloy10.1016/j.actamat.2017.06.018 ↗
14. An in situ investigation of the deformation mechanisms in a β-quenched Ti-5Al-5V-5Mo-3Cr alloy10.1016/j.msea.2018.01.077 ↗
15. Characterization of the martensitic transformation in the superelastic Ti-24Nb-4Zr-8Sn alloy by in situ synchrotron X-ray diffraction and dynamic mechanical analysis10.1016/j.actamat.2015.01.039 ↗
16. Stress-induced phase transformation and room temperature aging in Ti-Nb-Fe alloys10.1016/j.msea.2016.10.060 ↗
17. In situ synchrotron X-ray diffraction study of deformation behaviour of a metastable β-type Ti-33Nb-4Sn alloy
18. Role of element partitioning on the α-β phase transformation kinetics of a bi-modal Ti-6Al-6V-2Sn alloy during continuous heating10.1016/j.jallcom.2014.11.176 ↗
19. Influence of phase transformation kinetics on the formation of α in a β-quenched Ti-5Al-5Mo-5V-3Cr-1Zr alloy10.1016/j.actamat.2015.05.008 ↗
20. Variant selection and intervariant crystallographic planes distribution in martensite in a Ti-6Al-4V alloy10.1016/j.actamat.2014.06.064 ↗
21. Effect of β (110) texture intensity on α-variant selection and microstructure morphology during β→α phase transformation in near α titanium alloy10.1016/j.actamat.2016.12.069 ↗
22. Stress-induced orientation relationship variation for phase transformation of α-Ti to β-Ti during high speed machining Ti-6Al-4V10.1016/j.msea.2017.02.098 ↗
23. Variant selection in metastable β Ti-V-Fe-Al alloy during triaxial and uniaxial compression10.1016/j.mtla.2018.08.026 ↗
24. The role of crystallographic and geometrical relationships between α and β phases in an α/β titanium alloy10.1016/S1359-6454(03)00179-4 ↗
25. Effect of boundary on the alpha phase precipitation in a near-alpha titanium alloy10.1016/j.matlet.2018.09.025 ↗
26. In situ observations of lattice expansion and transformation rates of α and β phases in Ti-6Al-4V10.1016/j.msea.2004.08.084 ↗
27. The influence of partitioning on the growth of intragranular α in near-β Ti alloys
28. Composite structure of α phase in metastable β Ti alloys induced by lattice strain during β to α phase transformation10.1016/j.actamat.2017.04.051 ↗
29. Stress-induced phase transformation during superplastic deformation in two-phase Ti-Al-Fe alloy10.1016/S1359-6454(00)00049-5 ↗
30. Micromechanics of Ti-10V-2Fe-3Al: in situ synchrotron characterisation and modelling10.1016/j.actamat.2007.08.049 ↗
31. Understanding the strengthening effect of β1 precipitates in Mg-Nd using in situ synchrotron X-ray diffraction10.1007/s11837-018-2972-3 ↗
32. Measuring stress distributions in Ti-6Al-4V using synchrotron X-ray diffraction10.1007/s11661-008-9639-6 ↗
33. Load partition and microstructural evolution during in situ hot deformation of Ti-6Al-6V-2Sn alloys10.1016/j.msea.2016.01.059 ↗
34. The role of β-titanium ligaments in the deformation of dual phase titanium alloys10.1016/j.msea.2019.01.032 ↗
35. Parity tables in convergent-beam diffraction10.1016/0304-3991(89)90064-8 ↗
36. Effect of initial microstructure on the micromechanical behavior of Ti-55531 titanium alloy investigated by in-situ high-energy X-ray diffraction10.1016/j.msea.2019.138806 ↗
37. Elastic plastic deformation of TC6 titanium alloy analyzed by in-situ synchrotron based X-ray diffraction and microstructure based finite element modeling10.1016/j.jallcom.2016.07.105 ↗
38. Measurement of residual stresses in titanium alloys using synchrotron radiation10.1016/j.measurement.2019.04.021 ↗
39. Elastic stiffness and damping measurements in titanium alloys using atomic force acoustic microscopy10.1016/j.jallcom.2016.03.155 ↗
40. Elastic modulus of biomedical titanium alloys by nano-indentation and ultrasonic techniques-A comparative study10.1016/j.msea.2007.12.029 ↗
41. Intergranular and interphase microstresses10.1016/S1359-0286(00)00019-X ↗
42. Stress partitioning among ferrite, martensite and retained austenite of a TRIP-assisted multiphase steel: an in-situ high-energy X-ray diffraction study
43. Strengthened flow instability in hot deformation of titanium alloy with colony structure: on the effect of microstructure heterogeneity10.1016/j.jallcom.2019.05.179 ↗
44. Phase transformations in PuGa 1 at.% alloy: influence of stress on δ → α’ martensitic transformation at low temperatures10.1016/j.mtla.2019.100304 ↗
45. Inhibited dynamic recovery and screw dislocation annihilation in multiple slip of fcc single crystals10.1080/14786430500525241 ↗
46. Explicit incorporation of cross-slip in a dislocation density-based crystal plasticity model10.1080/14786435.2012.685964 ↗