journal article·2020-01

Effect of slurry composition on the microstructure and mechanical properties of SS316L open-cell foam

Teik Yi Lim, Wei Zhai, Xu Song, Xiang Yu, Tao Li, Beng Wah Chua, Fangsen Cui

Publisher page

Abstract

Abstract This experimental study systematically examines the effect of slurry composition on the microstructure and mechanical properties of open-cell foams, by altering the binder concentration and powder loading of SS316L slurries used in the template replication foam fabrication. The slurry and foam morphologies were observed by Scanning Electron Microscopy (SEM), whereas the rheological properties of the slurry were obtained using a rotational viscometer and parallel plate rheometer. Foam strut densities were measured by a gas pycnometer, which subsequently allowed for the calculation of foam porosity. The mechanical behaviours of the foams were attained through compression test. Results show that increasing both binder and powder contents lead to an increase in slurry viscosity, foam bulk density, green strut density and mechanical strength. A process window for foam fabrication was also proposed based on macroscopic foam morphology, rheological and mechanical properties, and corrosion behaviour of the resulting SS316L foams. Based on the proposed process window, the binder concentration is suggested to be within 10 vol% and 14 vol% and powder loading within Φ = 0.75 and 0.80. This study demonstrates that the microstructure of foam produced by the template replication method can be well-controlled by optimising the composition of the slurry, which is able to attain a higher compression strength than that in the conventional range of Gibson and Ashby scaling law.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Innovations in Concrete and Construction Materials · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Fabrication and properties of stainless steel foams for sandwich panels10.1177/1099636212439878 ↗
2. Metal foams: a design guide10.1016/S0261-3069(01)00049-8 ↗
3. A survey of fabrication and application of metallic foams (1925–2017)10.1007/s10934-017-0467-1 ↗
4. Numerical and experimental study on the acoustic performance of Ni-based superalloy open cell foam10.1016/j.proeng.2017.08.186 ↗
5. Factors having influence on the rheological properties of Ti6A14V slurry10.1023/B:JMSM.0000042680.10087.15 ↗
6. Microstructure-based experimental and numerical investigations on the sound absorption property of open-cell metallic foams manufactured by a template replication technique10.1016/j.matdes.2017.10.016 ↗
7. Rheological properties of commercially pure titanium slurry for metallic foam production using replica impregnation method10.1016/j.powtec.2014.06.030 ↗
8. Open cell metal foams – application-oriented structure and material selection
9. Synthesis and properties of metal matrix composite foams based on austenitic stainless steels -titanium carbonitrides10.1016/j.matdes.2015.06.016 ↗
10. The effect of slurry composition on the microstructure and mechanical properties of open-cell Inconel foams manufactured by the slurry coating technique10.1016/j.msea.2017.01.038 ↗
11. Preparation and characterisation of metal powder slurries for use as precursors for metal foams made by gel casting10.1179/003258910X12707304454906 ↗
12. Microstructure and mechanical properties of commercially pure titanium foam with varied cell size fabricated by replica impregnation method10.1016/j.msea.2015.10.074 ↗
13. Structure and properties of open-cell 316L stainless steel foams produced by a powder metallurgy-based process
14. Epson Atmix Corporation
15. International Organization for Standardization · 2011
16. Callister · 2014
17. Structural and material design of open-cell powder metallurgical foams10.1002/adem.201100023 ↗
18. ASM material data sheet - AISI type 316L stainless steel, annealed bar
19. Gibson · 1997
20. PM synthesis and properties of steel foams10.1016/S0921-5093(00)00761-9 ↗