journal article·2020-01Open access

Achieving good tensile properties in ultrafine grained nickel by spark plasma sintering

Lucía García de la Cruz, Mayerling Martinez, Clément Keller, Eric Hug

Abstract

In this work, the tensile properties of ultrafine grain Ni samples processed by spark plasma sintering are investigated. To this aim, a high purity Ni powder was nanostructured by ball milling using different processing conditions, and consolidation of the powder was performed by spark plasma sintering. Milling parameters were varied to produce samples with different microstructures. Each sample was characterised in terms of grain size and grain boundary character distribution to study the influence of milling parameters on the microstructure. Results show that suitable ball milling and subsequent sintering can be employed to obtain specimens with grain sizes in the ultrafine grain range with a high fraction of Σ3 grain boundaries. All samples exhibit a low internal stress state, which is evaluated in terms of grain orientation spread computed from electron backscatter diffraction and dislocation observation by transmission electron microscopy. Uniaxial tensile testing shows an increase in yield strength with grain refinement with a pronounced deviation from the Hall-Petch relation, for samples with grain sizes below 1.2 μm. Heterogeneity in deformation at yielding seems responsible for the deviation due to differences in the strain hardening behaviour between ultrafine grains and conventional coarse grains. All samples display high ductility with values of elongation to fracture above 35% as well as good toughness. The combination of ball milling with spark plasma sintering is therefore a promising tool to produce ultrafine grain Ni with good mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (87)

Show source-provided references
1. Advances in ultrafine-grained materials10.1016/j.mattod.2013.03.004 ↗
2. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
3. Twenty-five years of ultrafine-grained materials: achieving exceptional properties through grain refinement10.1016/j.actamat.2013.08.018 ↗
4. Producing bulk ultrafine-grained materials by severe plastic deformation: ten years later10.1007/s11837-016-1820-6 ↗
5. On the origin of extremely high strength of ultrafine-grained Al alloys produced by severe plastic deformation10.1016/j.scriptamat.2010.07.014 ↗
6. Interpretation of hardness evolution in metals processed by high-pressure torsion10.1007/s10853-014-8262-8 ↗
7. Wear resistance and electroconductivity in copper processed by severe plastic deformation10.1016/j.wear.2013.06.001 ↗
8. Diffusion of 63Ni in severely deformed ultrafine grained Cu-based alloys10.1016/j.scriptamat.2016.07.008 ↗
9. Persistence of ultrafast atomic diffusion paths in recrystallizing ultrafine grained Ni10.1016/j.scriptamat.2015.01.027 ↗
10. On the homogeneity of deformation by high pressure torsion10.1016/j.scriptamat.2004.04.025 ↗
11. Tensile strength and ductility of ultra-fine-grained nickel processed by severe plastic deformation10.1016/j.msea.2005.03.001 ↗
12. Deformation behaviour and microstructure of nanocrystalline electrodeposited and high pressure torsioned nickel10.1016/j.actamat.2005.01.041 ↗
13. Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion10.1016/S1359-6454(02)00466-4 ↗
14. Microhardness and microstructural evolution in pure nickel during high-pressure torsion10.1016/S1359-6462(01)00955-1 ↗
15. Spark Plasma Sintering of Co80Ni20 nanopowders synthesized by polyol process and their magnetic and mechanical properties10.1016/j.jallcom.2014.01.058 ↗
16. Spark plasma sintering behaviour of copper powders having different particle sizes and oxygen contents10.1016/j.powtec.2015.12.020 ↗
17. Grain growth and sintering characteristics of Ni–Cu alloy nanopowders consolidated by the spark plasma sintering method10.1016/j.msea.2012.01.033 ↗
18. Densification of Ni and TiAl by SPS: kinetics and microscopic mechanisms10.1007/s11661-018-4775-0 ↗
19. Modeling of microstructure effects on the mechanical behavior of ultrafine-grained nickels processed by hot isostatic pressing10.1016/j.ijmecsci.2011.06.012 ↗
20. Spark plasma sintering and hot isostatic pressing of nickel nanopowders elaborated by a modified polyol process and their microstructure, magnetic and mechanical characterization10.1016/j.jallcom.2010.02.142 ↗
21. Mechanical milling: a top down approach for the synthesis of nanomaterials and nanocomposites10.5923/j.nn.20120203.01 ↗
22. Synthesis of nanostructured materials by Mechanical Milling: problems and opportunities10.1016/S0965-9773(97)00014-7 ↗
23. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
24. Mechanical milling of aluminum powder using planetary ball milling process
25. Effect of ball size on steady state of aluminum powder and efficiency of impacts during milling10.1016/j.powtec.2015.06.035 ↗
26. Study of Al composites prepared by high-energy ball milling; Effect of processing conditions10.1016/j.jallcom.2015.01.018 ↗
27. Effect of grain refinement on mechanical properties of ball-milled bulk aluminum10.1016/j.msea.2008.01.045 ↗
28. Correlation between milling parameters and microstructure characteristics of nanocrystalline copper powder prepared via a high energy planetary ball mill10.1016/j.jallcom.2006.05.101 ↗
29. Mechanical alloying: an investigation on the high-energy ball milling of iron-titanium powder mixtures without process control agents
30. Influence of spark plasma sintering conditions on the sintering and functional properties of an ultra-fine grained 316L stainless steel obtained from ball-milled powder10.1016/j.msea.2016.04.039 ↗
31. Functional properties of a spark plasma sintered ultrafine-grained 316L steel10.1016/j.matdes.2014.06.053 ↗
32. Magnetoelasticity and internal strains in nanocrystalline nickel10.1016/S0965-9773(99)00242-1 ↗
33. Magnetic properties of ball milled nanocrystalline Ni and Fe10.1016/0965-9773(95)00225-1 ↗
34. Structural investigations of oxidative behavior on nanocrystalline nickel10.1016/j.jallcom.2010.12.077 ↗
35. Deformation conditions for Ni powders undergoing mechanical processing10.1016/j.jpcs.2012.01.024 ↗
36. Solid-state transformation in ball milled nickel powder10.1016/j.matlet.2010.05.052 ↗
37. Temperature dependence and size effects on strain hardening mechanisms in copper polycrystals10.1016/j.msea.2013.03.025 ↗
38. Size effects and temperature dependence on strain-hardening mechanisms in some face centered cubic materials10.1016/j.mechmat.2015.07.001 ↗
39. Microstructural size effects on mechanical properties of high purity nickel10.1016/j.ijplas.2010.08.002 ↗
40. Arias · 1975
41. The role of chemical reactions in the mechanism of comminution of ductile metals into ultrafine powders by grinding
42. Structural analysis and thermoelectric properties of mechanically alloyed colusites10.1039/C6TC02301K ↗
43. What does it mean to be special? The significance and application of the Brandon criterion10.1007/s10853-006-0665-8 ↗
44. The coincidence site lattice and the ‘sigma enigma10.1016/S1044-5803(02)00193-6 ↗
45. Size effect and boundary type on the strengthening of nanoscale domains in pure nickel10.1016/j.msea.2015.09.071 ↗
46. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
47. Nano-sized twins induce high rate sensitivity of flow stress in pure copper10.1016/j.actamat.2005.01.031 ↗
48. de la Cruz · 2017 · 200002
49. Processing of nanostructured nickel by severe plastic deformation consolidation of ball-milled powder10.1016/1359-6462(95)00676-1 ↗
50. Influence of spark plasma sintering (SPS) processing parameters on microstructure and mechanical properties of nickel10.1016/j.msea.2014.08.070 ↗
51. Effect of sintering temperature on grain boundary character distribution in pure nickel10.1016/j.scriptamat.2006.09.003 ↗
52. Room-temperature deformation micro-mechanisms of polycrystalline nickel processed by spark plasma sintering10.1016/j.matchar.2013.02.013 ↗
53. Influence of stacking fault energy and temperature on microstructures and mechanical properties of fcc pure metals processed by equal-channel angular pressing10.1016/j.msea.2016.03.022 ↗
54. On the kinetics of mechanical alloying10.1007/BF02665060 ↗
55. Microstructure and mechanical strength of near- and sub-micrometre grain size copper prepared by spark plasma sintering10.1016/j.matdes.2016.12.042 ↗
56. Microstructural evolution in ultrafine-grained titanium processed by high-pressure torsion under different pressures10.1007/s10853-014-8248-6 ↗
57. Grain boundary character distributions in nanocrystalline metals produced by different processing routes10.1007/s11661-015-3274-9 ↗
58. Influence of microstructure on thermal stability of ultrafine-grained Cu processed by equal channel angular pressing10.1007/s10853-018-2548-1 ↗
59. Subgrain growth and low angle boundary mobility in aluminium crystals of orientation {110}⟨001⟩10.1016/S1359-6454(99)00418-8 ↗
60. Calculated stacking-fault energies of elemental metals10.1103/PhysRevB.47.12865 ↗
61. Aspects of twinning and grain growth in high purity and commercially pure nickel10.1016/0921-5093(95)09821-6 ↗
62. Annealing twin development during recrystallization and grain growth in pure nickel10.1016/j.msea.2014.01.018 ↗
63. Formation of annealing twins in fcc crystals10.1016/S1359-6454(96)00336-9 ↗
64. The formation of annealing twins10.1016/0001-6160(69)90004-2 ↗
65. Grain growth and twinning in nickel10.1016/j.scriptamat.2007.09.016 ↗
66. Grain size and grain boundary character distribution in ultra-fine grained (ECAP) nickel10.1016/j.msea.2007.11.072 ↗
67. Study of annealing twins in FCC metals and alloys10.1007/BF02647209 ↗
68. Microstructure evolution and hardness variation during annealing of equal channel angular pressed ultra-fine grained nickel subjected to 12 passes10.1007/s10853-010-5122-z ↗
69. On the evaluation of dislocation densities in pure tantalum from EBSD orientation data10.1051/mattech/2018058 ↗
70. Statistical analysis of dislocations and dislocation boundaries from EBSD data10.1016/j.ultramic.2017.04.005 ↗
71. On the measurement of dislocations and dislocation substructures using EBSD and HRSD techniques10.1016/j.actamat.2019.05.036 ↗
72. Microstructure and mechanical behavior of ultrafine-grained Ni processed by different powder metallurgy methods10.1557/JMR.2009.0010 ↗
73. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
74. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
75. On the strengthening behavior of ultrafine-grained nickel processed from nanopowders10.1016/j.msea.2010.02.003 ↗
76. Hall–Petch behaviour of Ni polycrystals with a few grains per thickness10.1016/j.matlet.2007.09.069 ↗
77. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
78. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
79. Theory of plastic deformation:-properties of low energy dislocation structures10.1016/0921-5093(89)90290-6 ↗
80. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
81. Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes10.1016/j.scriptamat.2017.08.034 ↗
82. Transition of tensile deformation behaviors in ultrafine-grained aluminum10.1016/j.actamat.2005.05.005 ↗
83. Mechanism of huge Lüders-type deformation in ultrafine grained austenitic stainless steel10.1016/j.scriptamat.2018.09.007 ↗
84. Grain-size effects on tensile behavior of nickel and AISI 316L stainless steel10.1007/s11661-003-0296-5 ↗
85. Superior strength in ultrafine-grained materials produced by SPD processing10.2320/matertrans.MA201325 ↗
86. Ultra-fast diffusion channels in pure Ni severely deformed by equal-channel angular pressing10.1016/j.actamat.2010.11.063 ↗
87. Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena10.1016/j.msea.2012.01.080 ↗