Achieving stable plastic flows in a Zr-based bulk metallic glass under tailored mixed-mode (I/II) loading conditions
Source abstract
Abstract
Abstract The achievement of stable plastic flows plays a key role for practical structural applications of bulk metallic glasses (BMGs). In this work, by designing complex stress fields through tailored double-side notches, stable plastic flows in a Zr-based BMG were achieved under mixed-mode (I/II) loading conditions. The deformation behavior of the notched BMG specimens, including the shear-banding and fracture behaviors, was examined and correlated to the designed complex stress fields. The findings have shown that the stable plastic flows were mainly caused by the introducing of mode-II component under the mixed-mode (I/II) loading conditions. Increase of the mode-II component can result in not only more stable plastic flows, but also larger bearing loads. The present findings are of significance in uncovering the plastic deformation mechanisms of BMGs under mixed-mode loading conditions and in designing BMG structures with better mechanical performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Is metallic glass poised to come of age?10.1038/nmat4297 ↗
2. 3D metallic glass cellular structures10.1016/j.actamat.2015.11.057 ↗
3. Mechanical properties of bulk metallic glasses10.1016/j.pmatsci.2010.04.002 ↗
4. The fracture of bulk metallic glasses10.1016/j.pmatsci.2015.05.002 ↗
5. Super plastic bulk metallic glasses at room temperature10.1126/science.1136726 ↗
6. Fe-based bulk metallic glasses: brittle or ductile?10.1063/1.4899124 ↗
7. Plasticity improvement of an Fe-based bulk metallic glass by geometric confinement10.1016/j.matlet.2011.01.030 ↗
8. Plasticity enhancement of a Zr-based bulk metallic glass by an electroplated Cu/Ni bilayered coating10.1016/j.msea.2012.05.031 ↗
9. Improving plasticity of metallic glass by electropulsing-assisted surface severe plastic deformation10.1016/j.matdes.2019.107581 ↗
10. Induced multiple heterogeneities and related plastic improvement by laser surface treatment in CuZr-based bulk metallic glass10.1016/j.intermet.2012.01.022 ↗
11. Bulk metallic glass: the smaller the better10.1002/adma.201002148 ↗
12. Deformation behavior of bulk metallic glasses and high entropy alloys under complex stress fields: a review10.3390/e21010054 ↗
13. A critical review on metallic glasses as structural materials for cardiovascular stent applications10.3390/jfb9010019 ↗
14. Recent advancements in bulk metallic glasses and their applications: a review10.1080/10408436.2017.1358149 ↗
15. Highly stretchable kirigami metallic glass structures with ultra-small strain energy loss10.1016/j.scriptamat.2017.08.037 ↗
16. Loading-rate-independent delay of catastrophic avalanches in a bulk metallic glass
17. Achieving large macroscopic compressive plastic deformation and work-hardening-like behavior in a monolithic bulk metallic glass by tailoring stress distribution10.1063/1.2937141 ↗
18. Pronounced energy absorption capacity of cellular bulk metallic glasses
19. Mixed mode (I and II) crack tip fields in bulk metallic glasses10.1016/j.jmps.2009.07.006 ↗
20. On the mechanism and the length scales involved in the ductile fracture of a bulk metallic glass10.1016/j.actamat.2012.11.033 ↗
21. Increased toughness of zirconium-based bulk metallic glasses tested under mixed mode conditions10.1007/s11661-009-0059-z ↗
22. Deformation behavior of bulk metallic glasses under a mixed-mode (I/II) loading condition10.1016/j.intermet.2017.12.004 ↗
23. Instability analysis and free volume simulations of shear band directions and arrangements in notched metallic glasses
24. Metallic glasses: notch-insensitive materials10.1016/j.scriptamat.2012.01.044 ↗
25. Macroscopic tensile plasticity of bulk metallic glass through designed artificial defects10.1016/j.msea.2011.11.082 ↗
26. A nanoindentation study of serrated flow in bulk metallic glasses10.1016/S1359-6454(02)00303-8 ↗
27. Flow serration in a Zr-based bulk metallic glass in compression at low strain rates10.1016/j.intermet.2008.03.007 ↗
28. Shear band melting and serrated flow in metallic glasses10.1063/1.2956666 ↗
29. Micromechanisms of serrated flow in a Ni50Pd30P20 bulk metallic glass with a large compression plasticity10.1016/j.actamat.2008.02.015 ↗
30. Serrated flow kinetics in a Zr-based bulk metallic glass10.1016/j.intermet.2010.06.013 ↗
31. Hidden order in serrated flow of metallic glasses10.1016/j.actamat.2011.03.071 ↗
32. Self-organized intermittent plastic flow in bulk metallic glasses10.1016/j.actamat.2009.08.040 ↗
33. Plasticity of ductile metallic glasses: a self-organized critical state10.1103/PhysRevLett.105.035501 ↗
34. Intrinsic versus extrinsic effects on serrated flow of bulk metallic glasses10.1016/j.intermet.2015.06.018 ↗
35. Effect of size and base-element on the jerky flow dynamics in metallic glass10.1016/j.actamat.2013.10.023 ↗
36. The mechanism of power-law scaling behavior by controlling shear bands in bulk metallic glass10.1016/j.msea.2015.05.074 ↗
37. Serration and noise behaviors in materials10.1016/j.pmatsci.2017.06.004 ↗
38. Khanouki · J. Non-Cryst. Solids · 2019 · 505 · 6210.1016/j.jnoncrysol.2018.10.038 ↗
39. Effect of stress gradient on the deformation behavior of a bulk metallic glass under uniaxial tension10.1016/j.msea.2013.03.035 ↗
40. The conflicts between strength and toughness10.1038/nmat3115 ↗
41. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
42. Surface roughness imparts tensile ductility to nanoscale metallic glasses10.1016/j.eml.2015.08.004 ↗
43. Programmable super elastic kirigami metallic glasses10.1016/j.matdes.2019.107687 ↗
44. Metallic glass structures for mechanical-energy-dissipation purpose: a review10.3390/met8090689 ↗