journal article·2019-09

Discontinuous and inhomogeneous strain distributions under monotonic and cyclic loading in textured wrought magnesium alloys

Josef Denk, Anton Nischler, Lawrence Whitmore, Otto Huber, Holger Saage

Publisher page

Abstract

Abstract The present work investigates the deformation behaviour of strongly textured AZ31B wrought magnesium sheets under monotonic as well as cyclic mechanical loading. Of special focus is the distribution of strain, which is investigated employing optical strain field measurements on the specimen surfaces. Microstructural investigations of the material after loading provide detailed information on the underlying deformation characteristics. The investigations show that bands of twinned grains (BTGs) form up once twinning occurs. These BTGs consist of solely { 10 1 ‾ 2 } tension twins and are clearly delimited to the adjacent absolutely twin-free regions. Most importantly, strain fields are strongly inhomogeneous and discontinuous due to these BTGs with considerably higher compressive strain inside BTGs, both after monotonic and cyclic loading. During the first few load cycles, BTGs are observed to grow and the formation of new BTGs can occur. Additionally, a significant hardening is found during the first load cycles, most likely caused by residual twins and unretwinnable twins. However, material behaviour stabilizes after a few load cycles and remains approximately constant for most of a specimen's lifetime. The presented specific deformation characteristics are important for understanding and describing the material. Modelling the investigated material behaviour is not yet completely feasible with phenomenological constitutive models, which is why important modelling aspects are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Twinning-detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A10.1016/j.actamat.2007.10.030 ↗
2. Mechanical anisotropy of extruded Mg6% Al1% Zn alloy10.1016/j.msea.2004.02.020 ↗
3. The deformation characteristics of textured magnesium
4. Cyclic deformation behavior of as-extruded Mg-3%Al-1%Zn10.1016/j.scriptamat.2007.12.020 ↗
5. Quasi-static and fatigue behavior of extruded ME21 and twin roll cast AZ31 magnesium sheet metals10.1016/j.msea.2013.09.088 ↗
6. Low-cycle fatigue characteristics of rolled Mg-3Al-1Zn alloy10.1016/j.ijfatigue.2010.05.002 ↗
7. An experimental study of cyclic plastic deformation of extruded ZK60 magnesium alloy under uniaxial loading at room temperature10.1016/j.ijplas.2013.07.008 ↗
8. Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y10.1016/S1359-6454(01)00297-X ↗
9. Cold rolling textures in AZ31 wrought magnesium alloy10.1016/j.scriptamat.2004.01.010 ↗
10. Twinning and the ductility of magnesium alloys: Part I: “Tension” twins10.1016/j.msea.2006.12.037 ↗
11. Direct observation of twinning-detwinning-retwinning on magnesium single crystal subjected to strain-controlled cyclic tension-compression in [0001] direction10.1080/09500839.2011.617713 ↗
12. Reversible plastic strain during cyclic loading-unloading of Mg and Mg-Zn alloys10.1016/j.msea.2006.11.160 ↗
13. Localized twin bands in sheet bending of a magnesium alloy10.1016/j.scriptamat.2012.06.007 ↗
14. Uniaxial cyclic deformation and fatigue behavior of AM50 magnesium alloy sheet metals under symmetric and asymmetric loadings10.1016/j.matdes.2014.12.056 ↗
15. The fatigue life of notched magnesium sheet metals with emphasis on the effect of bands of twinned grains10.1016/j.ijfatigue.2017.01.041 ↗
16. Concept of the highly strained volume for fatigue modeling of wrought magnesium alloys10.1016/j.ijfatigue.2018.08.025 ↗
17. Modeling of twin formation, propagation and growth in a Mg single crystal based on crystal plasticity finite element method10.1016/j.ijplas.2016.08.002 ↗
18. Orthotropic yield criterion for hexagonal closed packed metals10.1016/j.ijplas.2005.06.001 ↗
19. An efficient constitutive model for room-temperature, low-rate plasticity of annealed Mg AZ31B sheet10.1016/j.ijplas.2009.11.001 ↗
20. A cyclic small-strain plasticity model for wrought Mg alloys under multiaxial loading: numerical implementation and validation10.1016/j.ijmecsci.2018.07.024 ↗
21. DAMASK the Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale10.1016/j.commatsci.2018.04.030 ↗
22. Microstructural investigation of twin-roll cast magnesium AZ31B subjected to a single monotonic compressive stress10.1016/j.jallcom.2019.03.068 ↗
23. Four-point-bending device for bending moment controlled cyclic reverse loading on plate materials and its application on az31b magnesium10.1016/j.ijfatigue.2017.12.011 ↗
24. A phenomenological stress-strain model for wrought magnesium alloys under elastoplastic strain-controlled variable amplitude loading10.1016/j.ijfatigue.2015.06.007 ↗
25. Selecting a set of discrete orientations for accurate texture reconstruction10.1016/j.commatsci.2007.09.015 ↗
26. Numerical investigation of the influence of twinning/detwinning on fatigue crack initiation in AZ31 magnesium alloy10.1016/j.msea.2019.03.030 ↗
27. Beausir · 2014
28. Roles of deformation twinning and dislocation slip in the fatigue failure mechanism of AZ31 Mg alloys10.1016/j.scriptamat.2010.03.021 ↗
29. The role of deformation twinning in the fracture behavior and mechanism of basal textured magnesium alloys10.1016/j.msea.2014.02.010 ↗