journal article·2019-02

In-situ transmission electron microscopy investigation of compressive deformation in interphase-precipitated carbide-strengthened α-iron single-crystal nanopillars

Ming-Yuan Gao, Shao-Pu Tsai, Jer-Ren Yang, Ya-Ling Chang, Takahito Ohmura, Chih-Yuan Chen, Shing-Hoa Wang, Yuan-Tsung Wang, Ching-Yuan Huang

Publisher page

Abstract

Abstract Compressive deformation tests were carried out during in-situ transmission electron microscopy to investigate the deformation behaviors of α-iron nanopillars with or without interphase-precipitated carbides. Three kinds of α-iron nanopillars were prepared from titanium-molybdenum-free and titanium-molybdenum-containing steels: one interphase-precipitated carbide-free and two interphase-precipitated carbide-bearing pillars with carbides of different sizes (4.7 nm and 3.0 nm after holding at 700 °C and 650 °C, respectively) and different number densities. In-situ observation provided direct evidence that interphase-precipitated nanometer-sized carbides confined the movement of the dislocations, resulting in smaller strain bursts with a significantly higher strength, in contrast to the behaviors of the pillars without carbides. The individual strain bursts in the in-situ stress-strain curves, which were associated with the corresponding dislocation substructures in the three kinds of pillars, are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Strengthening of ferrite by vanadium carbide precipitation10.1179/030634573790445370 ↗
2. Occurrence of fibrous vanadium carbide during transformation of an Fe-V-C steel
3. Structural aspects of alloy carbonitride precipitation in microalloyed steels
4. Precipitation of carbides at gamma-alpha boundaries in alloy steels10.1098/rspa.1971.0063 ↗
5. Bowing mechanism for interphase boundary migration in alloy steels10.1179/030634582790427389 ↗
6. The formation of discrete precipitate dispersions on mobile interphase boundaries in iron-base alloys10.1016/0001-6160(83)90113-X ↗
7. Development of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides10.2355/isijinternational.44.1945 ↗
8. Interphase precipitation of nanometer-sized carbides in a titanium–molybdenum-bearing low-carbon steel10.1016/j.actamat.2011.06.037 ↗
9. Analysis of the extent of interphase precipitation in V-HSLA steels through in-situ characterization of the gamma/alpha transformation10.1016/j.matchar.2016.03.021 ↗
10. Contribution of interphase precipitation on yield strength in thermomechanically simulated Ti-Nb and Ti-Nb-Mo microalloyed steels10.1016/j.msea.2014.09.111 ↗
11. Effects of transformation temperature on VC interphase precipitation and resultant hardness in low-carbon steels10.1016/j.actamat.2014.10.049 ↗
12. Interphase precipitation in niobium-microalloyed steels10.1016/j.actamat.2010.05.014 ↗
13. Microstructure characterization of nanometer carbides heterogeneous precipitation in Ti-Nb and Ti-Nb-Mo steel10.1016/j.matchar.2013.11.016 ↗
14. Stability of (Ti,M)C (M=Nb, V, Mo and W) carbide in steels using first-principles calculations10.1016/j.actamat.2011.09.051 ↗
15. Effect of Cr and Al additions on the development of interphase-precipitated carbides strengthened dual-phase Ti-bearing steels10.1016/j.matdes.2017.01.071 ↗
16. Effects of interphase TiC precipitates on tensile properties and dislocation structures in a dual phase steel10.1016/j.matchar.2016.11.023 ↗
17. Interphase precipitation in Ti–Nb and Ti–Nb–Mo bearing steel10.1179/1743284712Y.0000000131 ↗
18. Precipitation hardening of high-strength low-alloy steels by nanometer-sized carbides10.1016/j.msea.2007.11.110 ↗
19. Stress–strain behavior of ferrite and bainite with nano-precipitation in low carbon steels10.1016/j.actamat.2014.10.010 ↗
20. Mechanical annealing and source-limited deformation in submicrometre-diameter Ni crystals10.1038/nmat2085 ↗
21. A new regime for mechanical annealing and strong sample-size strengthening in body centred cubic molybdenum10.1038/ncomms1557 ↗
22. In situ nanocompression testing of irradiated copper10.1038/nmat3055 ↗
23. In-situ transmission electron microscopy investigation of the deformation behavior of spinodal nanostructured δ-ferrite in a duplex stainless steel10.1016/j.scriptamat.2016.06.047 ↗
24. Real time correlation between flow stress and dislocation density in steel during deformation10.1016/j.msea.2014.05.073 ↗
25. Insight into the deformation mechanisms of α-Fe at the nanoscale10.1016/j.scriptamat.2011.08.023 ↗
26. The effect of pre-existing defects on the strength and deformation behavior of α-Fe nanopillars10.1016/j.actamat.2012.09.022 ↗
27. Dislocation character transition and related mechanical response in a body-centered cubic single crystal10.1016/j.scriptamat.2012.05.032 ↗
28. Precipitation behavior in bimodal ferrite grains in a low carbon Ti-V-bearing steel10.1016/j.scriptamat.2017.09.029 ↗
29. Secondary hardened bainite10.1179/1743284714Y.0000000536 ↗
30. Microstructural evolutions of low carbon Nb/Mo-containing bainitic steels during high-temperature tempering10.1016/j.matchar.2017.07.022 ↗
31. Hull · 2001 · 102
32. Sample size effects on the large strain bursts in submicron aluminum pillars
33. Source-controlled yield and hardening of Cu(100) studied by in situ transmission electron microscopy10.1016/j.actamat.2010.10.065 ↗
34. Correlation between critical temperature and strength of small-scale bcc pillars10.1103/PhysRevLett.103.105501 ↗
35. Fundamental differences in mechanical behavior between two types of crystals at the nanoscale10.1103/PhysRevLett.100.155502 ↗
36. Nanoscale gold pillars strengthened through dislocation starvation10.1103/PhysRevB.73.245410 ↗
37. Size effect on strength and strain hardening of small-scale [111] nickel compression pillars10.1016/j.msea.2007.12.038 ↗
38. Size effects in the deformation of sub-micron Au columns10.1080/14786430600567739 ↗
39. Tensile and compressive behavior of tungsten, molybdenum, tantalum and niobium at the nanoscale10.1016/j.actamat.2009.12.022 ↗
40. Hull · 2001 · 62
41. Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients10.1016/j.actamat.2004.12.031 ↗