Effects of CaO addition and strain rate on the texture evolution of AZ31 alloy
Source abstract
Abstract
Abstract The controlling alloying elements and deformation parameters are significant factors of the plastic deformation of Mg alloys due to their low formability and difficult-to-control texture. In this study, we investigated the effect of both CaO addition and the strain rate on the texture evolution and flow behavior of AZ31 alloys by carrying out hot torsion. The dislocation components of the deformed AZ31 alloys were evaluated using X-ray line profile analysis (XLPA). The XLPA results showed that the strain rate variation significantly affected the dislocation components and dislocation density of the alloys while CaO addition has only dislocation density effect. According to the results, weaken texture evolution by CaO addition is based on not variation of slip modes but grain boundary mobility. Also, it was determined that high strain rate deformation affect texture evolution by fortifying -type slip mode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility10.1016/j.msea.2008.05.045 ↗
2. Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y10.1016/S1359-6454(01)00297-X ↗
3. Transmission electron microscopy investigation of ; dislocations in Mg and a–solid solution Mg-Li alloys10.1007/s11661-002-0154-x ↗
4. The influence of calcium and cerium mischmetal on the microstructural evolution of Mg–3Al–1Zn during extrusion and resulting mechanical properties10.1016/j.actamat.2008.02.010 ↗
5. Enhanced precipitation hardening of Mg–Ca alloy by Al addition10.1016/j.scriptamat.2010.06.028 ↗
6. Transmission electron microscopy and thermodynamic studies of CaO-added AZ31 Mg alloys10.1016/j.actamat.2013.02.015 ↗
7. The transformation of slip dislocations during twinning of copper-aluminum alloy crystals10.1051/metal/199794091037 ↗
8. Twinning and texture development in two Mg alloys subjected to loading along three different strain paths10.1016/j.actamat.2007.03.006 ↗
9. Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures10.1016/j.ijplas.2010.08.009 ↗
10. Strain rate and texture effects on microstructural characteristics of Mg-3Al-1Zn alloy during compression10.1016/j.scriptamat.2011.10.046 ↗
11. Crystallite size distribution and dislocation structure determined by diffraction profile analysis: principles and practical application to cubic and hexagonal crystals10.1107/S0021889801003715 ↗
12. Contrast factors of dislocations in the hexagonal crystal system10.1107/S0021889802009536 ↗
13. Stacking faults and twin boundaries in fcc crystals determined by X-ray diffraction profile analysis10.1063/1.2216195 ↗
14. Twinning on pyramidal planes in hexagonal close packed crystals determined along with other defects by X-ray line profile analysis10.1107/S0021889809022936 ↗
15. A general recursion method for calculating diffracted intensities from crystals containing planar faults10.1098/rspa.1991.0062 ↗
16. The use of X-ray diffraction to determine slip and twinning activity in commercial-purity (CP) titanium10.1016/j.msea.2007.06.096 ↗
17. Evolution of dislocation density and character in hot rolled titanium determined by X-ray diffraction10.1016/j.matchar.2005.03.002 ↗
18. Evolution of microstructure and hardness in AZ31 alloy processed by high pressure torsion10.1016/j.msea.2014.12.005 ↗
19. Evaluation of dislocation density in a Mg-Al-Mn-Ca alloy determined by X-ray diffractometry and transmission electron microscopy10.2320/matertrans.M2010021 ↗
20. A numerical Fourier-analysis method for the correction of widths and shapes of lines on X-ray powder photographs10.1088/0959-5309/61/4/311 ↗
21. Grain to grain slip activity in plastically deformed Zr determined by X-ray micro-diffraction line profile analysis10.1016/j.actamat.2006.09.031 ↗
22. Quantification of dislocation structures from anelastic deformation behavior10.1016/j.actamat.2016.05.040 ↗
23. Microstructure and mechanical behavior of AZ91 Mg alloy processed by equal channel angular pressing10.1016/j.jallcom.2004.10.050 ↗
24. The evolution of non-basal dislocations as a function of deformation temperature in pure magnesium determined by X-ray diffraction10.1016/j.actamat.2004.02.034 ↗
25. Balzar · 2000
26. The relationship between flow stress and dislocation density in deformed vanadium
27. Effect of grain orientation on deformation structure in cold-rolled polycrystalline aluminium10.1016/S1359-6454(98)00229-8 ↗
28. Effects of Ca addition on microstructure of twin-roll cast AZ31 Mg alloy10.1007/s12540-009-0001-3 ↗
29. Recrystallisation mechanisms and the origin of cube texture in copper10.1016/0001-6160(82)90033-5 ↗
30. A quantitiave analysis of the evolution of texture and stored energy during annealing of cold rolled copper10.1016/j.actamat.2003.08.039 ↗
31. Okamoto · 1992 · 556
32. Hot deformation characteristics of CaO-added AZ31 based on kinetic models and processing maps10.1016/j.msea.2017.03.058 ↗
33. Precipitate transformation of AlxMny phases to Al8Mn4Ca during solution heat treatment and its effect on the mechanical properties of CaO-added AZ31 alloys10.1016/j.matchar.2019.03.018 ↗
34. Modeling of texture evolution in the deformation zone of second-phase particles10.1016/j.actamat.2008.10.052 ↗
35. Effect of plate-shaped particle distributions on the deformation behaviour of magnesium alloy AZ91 in tension and compression10.1016/j.actamat.2011.10.001 ↗
36. Particle effects on recrystallization in magnesium–manganese alloys: particle-stimulated nucleation10.1016/j.actamat.2009.02.032 ↗
37. A model of continuous dynamic recrystallization10.1016/S1359-6454(03)00078-8 ↗
38. Dynamic continuous recrystallization characteristics in two stage deformation of Mg-3Al-1Zn alloy sheet10.1016/S0921-5093(02)00096-5 ↗
39. Influence of second-phase precipitates on the texture evolution of Mg-Al-Zn alloys during hot deformation10.1016/j.scriptamat.2011.10.028 ↗
40. Nonbasal deformation modes of HCP metals and alloys: role of dislocation source and mobility10.1007/s11661-002-0150-1 ↗