journal article·2019-01

Cohesive and adhesive properties of nanocrystalline Ti thin films on polyimide substrates

K. Wu, Y. Xia, H.Z. Yuan, J.Y. Zhang, G. Liu, J. Sun

Publisher page

Abstract

Abstract In this work, cohesive and adhesive properties of Ti thin films on polyimide substrates were studied systematically as a function of grain size by in situ optical microscopy, resistance measurements and synchrotron X-ray diffraction under uniaxial tensile testing. The characteristic of cohesive and adhesive behavior can be well reflected in the stress-strain curves determined by synchrotron X-ray diffraction. Generally, the yield strength decreases while the cracking strain increases with increasing grain size, due to the constraint effect of grain size on dislocation activity. Different from the yield strength, the fracture strength is almost unchanged with grain size. The fracture toughness is found to increase as the grain size increases, which is attributed to the enhanced plasticity during fracture process. Additionally, the interfacial adhesion energy is determined to be 3.8 J m−2. The buckling strain increases with increasing grain size as a result of enhanced plastic dissipation. The formation of patches, instead of buckles, in Ti film with smaller grain size is ascribed to the low deformation capability of the film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Properties of titanium thin films deposited by dc magnetron sputtering10.1016/j.msea.2006.06.020 ↗
2. Adhesion and mechanical properties of Ti films deposited by DC magnetron sputtering10.1016/j.surfcoat.2018.05.078 ↗
3. Tailoring of titanium thin film properties in high power pulsed magnetron sputtering10.1016/j.vacuum.2018.01.039 ↗
4. Hydrogen behavior in nanocrystalline titanium thin films10.1016/j.actamat.2010.01.036 ↗
5. Effect of sputtering power on surface topography of dc magnetron sputtered Ti thin films observed by AFM10.1016/j.apsusc.2008.12.029 ↗
6. Influence of oxygen on the morphological and structural properties of Ti thin films grown by ion beam-assisted deposition10.1016/S0040-6090(00)01804-6 ↗
7. Thickness-dependent FCC–HCP phase transformation in polycrystalline titanium thin films10.1016/j.actamat.2010.12.046 ↗
8. Mechanical behavior and deformation mechanism of commercial pure titanium foils10.1016/j.msea.2017.09.080 ↗
9. Effect of temperature on residual stress and mechanical properties of Ti films prepared by both ion implantation and ion beam assisted deposition10.1016/j.apsusc.2008.11.053 ↗
10. Effect of thickness on the properties of sputtered Ti thin films on AA1100 for MEMS application
11. Crystal structures of titanium, zirconium, and hafnium at high pressures10.1126/science.140.3562.72 ↗
12. Cohesive and adhesive properties of ultrathin amorphous and crystalline Ge2Sb2Te5 films on polyimide substrates10.1016/j.actamat.2016.12.060 ↗
13. Cohesive and adhesive failure of hard and brittle films on ductile metallic substrates: a film thickness size effect analysis of the model system hydrogenated diamond-like carbon (a-C:H) on Ti substrates10.1016/j.actamat.2014.09.044 ↗
14. The effect of film thickness on the failure strain of polymer-supported metal films10.1016/j.actamat.2009.11.010 ↗
15. Evaluation of interfacial stress transfer efficiency by coating fragmentation test10.1016/j.mechmat.2007.02.003 ↗
16. An elevated temperature study of a Ti adhesion layer on polyimide10.1016/j.tsf.2013.01.016 ↗
17. Inverse effect of thickness on the ductility in nanocrystalline Cu films10.1016/j.msea.2011.08.033 ↗
18. Thickness dependence of the electro-mechanical response of sputter-deposited Mo thin films on polyimide: insights from in situ synchrotron diffraction tensile tests10.1016/j.msea.2017.04.101 ↗
19. Thickness dependent critical strain in submicron Cu films adherent to polymer substrate10.1063/1.2722684 ↗
20. The relationship between thin film fragmentation and buckle formation: synchrotron-based in situ studies and two-dimensional stress analysis10.1016/j.actamat.2008.11.023 ↗
21. In situ studies on the cohesive properties of α - and β -Ta layers on polyimide substrates10.1016/j.actamat.2011.05.057 ↗
22. In situ study of cracking and buckling of chromium films on PET substrates10.1007/s11340-010-9359-x ↗
23. Size- and phase-dependent mechanical properties of ultrathin Si films on polyimide substrates10.1016/j.actamat.2016.03.028 ↗
24. Fracture toughness of Mo2BC thin films: Intrinsic toughness versus system toughening10.1016/j.matdes.2018.05.015 ↗
25. A comparative micro-cantilever study of the mechanical behavior of silicon based passivation films10.1016/j.tsf.2009.07.143 ↗
26. Fracture toughness of silicon nitride thin films of different thicknesses as measured by bulge tests10.1016/j.actamat.2010.11.043 ↗
27. Understanding the extremely low fracture toughness of freestanding gold thin films by in-situ bulge testing in an AFM10.1016/j.msea.2017.03.037 ↗
28. Effect of intrinsic stress gradient on the effective mode-I fracture toughness of amorphous diamond-like carbon films for MEMS10.1016/j.jmps.2007.05.013 ↗
29. Cracking of thin bonded films in residual tension10.1016/0020-7683(92)90015-L ↗
30. The electro-mechanical response of elastomer membranes coated with ultra-thin metal electrodes10.1016/j.jmps.2005.05.002 ↗
31. Thickness effect on the fracture and delamination of titanium films10.1016/j.tsf.2015.05.021 ↗
32. Highly sensitive infrared temperature sensor using self-heating compensated microbolometers10.1016/S0924-4247(99)00280-0 ↗
33. Thermal micropressure sensor for pressure monitoring in a minute package10.1116/1.1333085 ↗
34. Length scale dependent yield strength and fatigue behavior of nanocrystalline Cu thin films10.1016/j.msea.2011.06.083 ↗
35. Surface structure and composition of flat titanium thin films as a function of film thickness and evaporation rate10.1016/j.apsusc.2005.01.013 ↗
36. Noyan · 1987
37. Two scaling domains in multiple cracking phenomena10.1103/PhysRevE.62.7807 ↗
38. Durability of nanosized oxygen-barrier coatings on polymers10.1016/S0079-6425(02)00002-6 ↗
39. A method to measure the adhesion of thin glass coatings on polymer films10.1080/00218469408027078 ↗
40. Crack patterns in thin films10.1016/S0022-5096(99)00081-2 ↗
41. Adhesion energies of Cr thin films on polyimide determined from buckling: experiment and model10.1016/j.actamat.2010.06.032 ↗
42. Stresses in thin films: the relevance of grain boundaries and impurities10.1016/0040-6090(76)90453-3 ↗
43. Intrinsic stress in sputter-deposited thin films10.1080/10408439208244586 ↗
44. Stress and strain in polycrystalline thin films10.1016/j.tsf.2007.03.007 ↗
45. Model for stress generated upon contact of neighboring islands on the surface of a substrate10.1063/1.1359437 ↗
46. Toward a quantitative understanding of mechanical behavior of nanocrystalline metals10.1016/j.actamat.2007.01.038 ↗
47. Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals10.1080/09506608.2016.1191808 ↗
48. Adhesion of silicon oxide layers on poly(ethylene terephthalate). II: Effect of coating thickness on adhesive and cohesive strengths10.1002/(SICI)1099-0488(19970715)35:9<1463::AID-POLB16>3.0.CO;2-4 ↗
49. Dimensional control of brittle nanoplatelets. A statistical analysis of a thin film cracking approach10.1021/nl061225w ↗
50. Mechanical properties of biomedical titanium alloys10.1016/S0921-5093(97)00806-X ↗
51. A model for the effect of thickness on fracture toughness
52. Size-dependent fracture toughness of tungsten10.1016/j.actamat.2017.07.030 ↗
53. Brittle film-induced cracking of ductile substrates10.1016/j.actamat.2015.07.059 ↗
54. Size dependence of buckling strains of Cr films, Cu films and Cu/Cr multilayers on compliant substrates10.1016/j.scriptamat.2017.10.025 ↗
55. Buckling patterns of thin films on compliant substrates: the effect of plasticity10.1088/0022-3727/44/4/045401 ↗