journal article·2018-08

Flow curves and microstructure of K107 tool steel subjected to compression tests at elevated temperatures

S. Zangeneh Najafi, A. Momeni, H.R. Jafarian

Publisher page

Abstract

Abstract Hot compression tests were performed on K107 cold-work tool steel at various temperatures in range of 800–1200 °C and strain rates of 0.001–1 s−1. The microstructural evolutions including dynamic precipitation (DP) of carbide particles and dynamic recrystallization (DRX) mechanism were investigated by optical and FESEM-EBSD observations. The peak strain of flow curves showed uncommon increase within the temperature range of 900–1100 °C and strain rates of 0.001–0.01 s−1. Optical microscopy observations and image analysis quantifications showed that the uncommon behavior is associated with the formation of fine carbides by DP. At 1100 °C, the rate of DP reaches a maximum and then decreases at higher temperatures. Microstructural observations implied that DP could retard DRX at 900–1100 °C and strain rates of 0.001–0.01 s−1. The discontinuous DRX (DDRX) only appeared at 800 °C as the formation of grain boundary nucleation. At temperature range of 900–1100 °C, intensive DP on the grain boundaries could avoid DDRX. The continuous DRX (CDRX) was found as the major mechanism of dynamic softening at 900–1100 °C. It was found that the subgrain growth and progressive rotation lead to the transformation of sub-boundaries into high angle grain boundaries and propel CDRX.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Microstructural evolution and constitutive models to predict hot deformation behaviors of a nickel-based superalloy10.1016/j.vacuum.2016.12.022 ↗
2. Regression based novel constitutive analyses to predict high temperature flow behavior in super austenitic stainless steel10.1016/j.msea.2017.07.035 ↗
3. Modeling the viscoplastic behavior and grain size in a hot worked Nb-bearing high-Mn steel10.1016/j.msea.2017.12.094 ↗
4. An improved kinetics model to describe dynamic recrystallization behavior under inconstant deformation conditions10.1557/jmr.2016.325 ↗
5. Evolution of microstructures during dynamic recrystallization and dynamic recovery in hot deformed Nimonic 80a10.1016/j.msea.2003.10.226 ↗
6. A comparative study on the hot working behavior of inconel 718 and ALLVAC 718 Plus10.1007/s11661-016-3904-x ↗
7. Hot deformation behavior and microstructure evolution of a stabilized high-Cr ferritic stainless steel10.1016/j.msea.2013.01.077 ↗
8. A new model for dynamic recrystallization under hot working conditions based on critical dislocation gradients10.1016/j.proeng.2017.10.1111 ↗
9. Microstructure evolution at the onset of discontinuous dynamic recrystallization: a physics-based model of subgrain critical size10.1016/j.jallcom.2013.10.180 ↗
10. Development of dislocation-based unified material model for simulating microstructure evolution in multipass hot rolling10.1080/14786430412331305285 ↗
11. Modeling and simulation of dynamic recrystallization behavior for 42CrMo steel by an extended cellular automaton method10.1016/j.vacuum.2017.09.041 ↗
12. Discontinuous dynamic recrystallization of inconel 718 superalloy during the superplastic deformation10.1007/s11661-015-3031-0 ↗
13. Dynamic softening mechanism in Ti-13V-11Cr-3Al beta Ti alloy during hot compressive deformation10.1016/j.msea.2016.04.040 ↗
14. Continuous dynamic recrystallization behavior and kinetics of Al–Mg–Si alloy modified with CaO-added Mg10.1016/j.msea.2016.07.100 ↗
15. Constitutive analysis and processing map for hot working of a Ni-Cu alloy10.1007/s12540-013-1003-8 ↗
16. Hot workability of three grades of tool steel
17. Effect of quenching and tempering on microstructure and mechanical properties of 410 and 410 Ni martensitic stainless steels10.1557/jmr.2016.485 ↗
18. Three important points that relate to improving the hot workability of ledeburitic tool steels10.1007/s11661-012-1195-4 ↗
19. Breakdown behavior of eutectic carbide in high speed steel during hot compression
20. The behavior of the carbides of ledeburitic AISI D2 tool steel during multiple hot deformation cycles10.1016/j.matchar.2013.06.008 ↗
21. Study of carbide evolution during thermo-mechanical processing of AISI D2 tool steel10.1007/s11665-012-0340-y ↗
22. Hot ductility of tool steels10.1179/000844301794388461 ↗
23. Peak strength, strain hardening and dynamic restoration of A2 and M2 tool steels in hot deformation10.1016/S0921-5093(01)00976-5 ↗
24. Investigation on hot deformation behavior of AISI T1 high-speed steel10.1016/S1044-5803(00)00071-1 ↗
25. Flow curves, dynamic recrystallization and precipitation in a medium carbon low alloy steel10.1016/j.vacuum.2017.05.010 ↗
26. Effect of dynamic precipitation and twinning on dynamic recrystallization of micro-alloyed Mg–Al–Ca alloys10.1016/j.msea.2013.08.019 ↗
27. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
28. Recrystallization, precipitation and flow behavior of D3 tool steel under hot working condition10.1016/j.matchar.2017.09.009 ↗
29. Investigation on dynamic recrystallization behavior of martensitic stainless steel10.1155/2014/986928 ↗
30. Critical Condition of Dynamic Recrystallization in 35CrMo Steel10.3390/met7050161 ↗
31. Dynamic recrystallization and precipitation in 13Cr super-martensitic stainless steels10.1007/s11661-013-2119-7 ↗
32. J. Humphreys, G.S. Rohrer, A. Rollet, Recrystallization and related annealing phenomena, 3th Ed., Elsevier, Netherland.
33. Spheroidization and ostwald growth of carbide in isothermal process of hot-deformed high carbon chromium cast steel
34. The development of microstructure in Al-5% Mg during high temperature deformation10.1016/0001-6160(86)90171-9 ↗
35. Microstructure evolution at the onset of discontinuous dynamic recrystallization: a physics-based model of subgrain critical size10.1016/j.jallcom.2013.10.180 ↗
36. Precipitation behavior during high-temperature isothermal compressive deformation of Inconel 718 alloy10.1016/j.msea.2016.09.088 ↗
37. F.J. Humphreys, M. Hatherly, Recrystallization and related annealing phenomena, 2nd Ed., Elsevier, Oxford, UK.
38. Dynamic recrystallization of ferrite with particle-stimulated nucleation in a low-carbon steel10.1007/s11661-012-1572-z ↗
39. Continuous dynamic recrystallization of AISI 430 ferritic stainless steel10.1007/BF03027023 ↗
40. Influence of processing parameters on dynamic recrystallization and the associated annealing twin boundary evolution in a nickel base superalloy10.1016/j.msea.2017.05.109 ↗
41. Formation of annealing twin during primary recrystallization of two low stacking fault energy Ni-based alloys10.1007/s10853-014-8780-4 ↗