Excellent combination of strength and ductility of Al-1.2Mn alloy with multi-scale lamellar structure
Source abstract
Abstract
Abstract By the method of cold rolling, appropriate intermediate annealing and final annealing treatments, the multi-scale lamellar structure of ultrafine grains distributed in ribbons with coarse grains was produced in an Al-1.2Mn alloy, which displayed excellent combination of high strength and good ductility compared to coarse-grained and ultrafine-grained alloys. The high strength of the alloy with multi-scale lamellar structure is attributed to back stress strengthening associated with the formation of geometrically necessary dislocations and the good ductility results from the high strain hardening rate during plastic deformation. Loading-unloading-reloading tests were carried out to measure the back stresses of the alloys. The results show that the back stress of the specimen with multi-scale lamellar structure is much higher than that of the coarse-grained specimen.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Twenty-five years of ultrafine-grained materials: achieving exceptional properties through grain refinement10.1016/j.actamat.2013.08.018 ↗
2. Constrained groove pressing, cold-rolling, and post-deformation isothermal annealing: consequences of their synergy on material behavior10.1016/j.matchemphys.2017.12.010 ↗
3. Nano/ultrafine grained AA2024 alloy processed by accumulative roll bonding: a study of microstructure, deformation texture and mechanical properties10.1016/j.jallcom.2017.04.117 ↗
4. Microanalysis of crystallographic characteristics and structural transformations in SPDed Al-Mn-Si alloy by dual-straining10.1016/j.jallcom.2016.12.086 ↗
5. Mechanistic insight into the role of severe plastic deformation and post-deformation annealing in fracture behavior of Al-Mn-Si alloy10.1016/j.mechmat.2018.04.002 ↗
6. Predicting the ultimate grain size of aluminum sheets undergone constrained groove pressing10.1007/s00170-015-8212-x ↗
7. Impact of grain size distribution on the multiscale mechanical behavior of nanocrystalline metals10.1016/j.msea.2009.11.033 ↗
8. Fabrication of nanostructure Al/SiCP composite by accumulative roll-bonding (ARB) process10.1016/j.jallcom.2009.12.026 ↗
9. Producing laminated NiAl with bimodal distribution of grain size by solid-liquid reaction treatment10.1016/j.msea.2013.10.038 ↗
10. Bimodal microstructure – A feasible strategy for high-strength and ductile metallic materials10.1016/j.jmst.2017.11.018 ↗
11. Review on superior strength and enhanced ductility of metallic nanomaterials10.1016/j.pmatsci.2018.02.002 ↗
12. Bi-modally structured pure aluminum for enhanced strength and ductility10.1016/j.matdes.2015.06.062 ↗
13. High ductility bulk nanostructured Al-Mg binary alloy processed by equal channel angular pressing and inter-pass annealing10.1016/j.scriptamat.2015.04.018 ↗
14. Microstructural evolution and mechanical properties of a 5052 Al alloy with gradient structures10.1557/jmr.2017.310 ↗
15. Achieving high strength and ductility in double-sided friction stir processing 7050-T7451 aluminum alloy10.1016/j.msea.2017.09.028 ↗
16. Continuous recrystallization of commercial Al-1.2 wt%Mn alloy produced by thermomechanical processing10.1016/j.matlet.2016.05.102 ↗
17. Outstanding mechanical properties of high-pressure torsion processed multiscale TWIP-cored three layer steel sheet10.1016/j.scriptamat.2016.06.009 ↗
18. Mechanical properties of copper/bronze laminates Role of interfaces10.1016/j.actamat.2016.06.023 ↗
19. Synergetic strengthening by gradient structure10.1080/21663831.2014.935821 ↗
20. Strength and ductility of gradient structured copper obtained by surface mechanical attrition treatment10.1016/j.matdes.2016.05.015 ↗
21. Strain hardening and ductility in a coarse-grain/nanostructure laminate material10.1016/j.scriptamat.2015.03.006 ↗
22. Back stress strengthening and strain hardening in gradient structure10.1080/21663831.2016.1153004 ↗
23. Bauschinger effect and back stress in gradient Cu-Ge Alloy10.1007/s11661-017-4176-9 ↗
24. Extraordinary strain hardening by gradient structure10.1073/pnas.1324069111 ↗
25. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
26. Grain structure, geometrically necessary dislocations and second-phase particles in polycrystals of micro- and mesolevels10.1016/j.physme.2009.12.010 ↗
27. Mechanical properties and thermal stability of nanocrystallized pure aluminum produced by surface mechanical attrition treatment10.1016/j.msea.2015.03.068 ↗
28. I. Shingo, O. Kazuyo, Effect of coarse particles on work hardening in the Al-Mn alloy, Proc. 13th Int. Conf. on Aluminum Alloys, ed. by H. Weiland, A.D. Rollett, W.A. Cassada, (The Minerals, Metals & Materials Society, 2012) pp. 1811-1816.
29. Influence of pre-recovery on the subsequent recrystallization and mechanical properties of a twin-roll cast Al-Mn alloy10.1016/j.msea.2016.11.018 ↗
30. Constrained groove pressing and subsequent annealing of Al-Mn-Si alloy: microstructure evolutions, crystallographic transformations, mechanical properties, electrical conductivity and corrosion resistance10.1016/j.matdes.2017.03.053 ↗
31. Study on the effect of post-annealing on the microstructural evolutions and mechanical properties of rolled CGPed Aluminum-Manganese-Silicon alloy10.1016/j.msea.2016.10.054 ↗
32. Mechanical and corrosion properties of cold-rolled sheets from alloys of the Al-Mn system10.1007/s11041-008-9028-1 ↗
33. Study on the post-rolling direction of severely plastic deformed Aluminum-Manganese-Silicon alloy10.1016/j.acme.2016.06.005 ↗