Thermo-mechanical processing, microstructure and mechanical properties of TiZrB alloy
Source abstract
Abstract
Abstract This work was aimed in the relationships investigation among the microstructure, the tensile properties and the thermo-mechanical processing of a novel Ti-25Zr-1B (wt%) alloy. The alloy was evaluated under different conditions (as-cast, hot-rolled and hot-rolled-annealed). The XRD diagrams demonstrated that all specimens were completely consisted of the α and TiB phases. The results of EDS indicated that the TiB phase dissolved a certain amount of Zr, which was in agreement with the existence of TiB peaks shifting towards lower diffraction angles. The as-cast Ti-25Zr-1B alloy microstructure and the size, the morphology, the orientation, and the distribution of the TiB particles could be significantly altered by the hot-rolling process. The hot-rolling process provided an ultimate strength increase of at least 7 pct and the elongation-to-failure increase of 135 pct relatively to the as-cast sample. In addition, the annealing heat treatment could effectively modify the mechanical properties of the hot-rolled sample. The strength decreased and the elongation-to-failure increased as the annealing temperature increased, while the temperature was below 800 °C. In contrast, as the annealing temperature increased to 900 °C, the alloy demonstrated appreciably lower elongation-to-failure and higher strength compared to the annealed form at 800 °C. The mechanical properties variation of the Ti-25Zr-1B alloy series was ascribed to the microstructure evolution of the matrix alloy as well as to the morphology and volume fraction changes of the TiB particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Microstructural effects on the mechanical behavior of B-modified Ti-6Al-4V alloys10.1016/j.actamat.2007.05.009 ↗
2. Importance of slip mode for dispersion-hardened β-Titanium alloys10.1007/BF02643096 ↗
3. Modification of alpha morphology in Ti-6Al-4V by thermomechanical processing10.1007/BF02644991 ↗
4. Effect of zirconium content on the microstructure and corrosion behavior of Ti-6Al-4V-xZr alloys10.1016/j.corsci.2016.09.012 ↗
5. Effects of chromium addition on structure and mechanical properties of Ti-10Zr alloy10.1016/j.jallcom.2009.04.148 ↗
6. Shape memory behavior in Ti-Zr alloys10.1016/j.scriptamat.2010.11.048 ↗
7. The effect of the solute on the structure, selected mechanical properties, and biocompatibility of Ti–Zr system alloys for dental applications10.1016/j.msec.2013.09.032 ↗
8. Phase Diagrams of Binary Titanium Alloys
9. Influence of martensitic transformation on mechanical compatibility of biomedical β type titanium alloy TLM10.1016/j.msea.2005.12.079 ↗
10. Thermal expansion and microstructural analysis of experimental metal-ceramic titanium alloys10.1016/S0022-3913(03)00493-1 ↗
11. Grain refinement of cast titanium alloys via trace boron addition10.1016/j.scriptamat.2005.08.020 ↗
12. Effect of Minor Additions of Boron on Microstructure and Mechanical Properties of As-Cast Near α Titanium Alloy10.1007/s11661-009-0155-0 ↗
13. Microstructure and texture evolution during β extrusion of boron modified Ti–6Al–4V alloy10.1016/j.msea.2012.01.120 ↗
14. Effects of boron on the fracture behavior and ductility of cast Ti-6Al-4V alloys10.1016/j.scriptamat.2014.12.022 ↗
15. 1990 · 547
16. T.E. Eckert, AFML TR-65-2, Part II, Vol. XII, Wright Patterson AFB, Ohio, 1966.
17. ASM Alloy Phase Diagrams Center, 2007, in: E. Rudy, Ti-Zr-B System, Compendium of Phase Diagram Data, Ternary Phase Equilibria in TM-B-C-Si, E. Rudy 528-547, 1969.
18. Structure and mechanical properties of as-cast (ZrTi)100-xBx alloys10.1016/j.jallcom.2015.02.204 ↗
19. Processing, microstructure, texture, and tensile properties of the Ti-6Al-4V-1.55B eutectic alloy, metall10.1007/s11661-007-9425-x ↗
20. A novel Ti-6Al-4V alloy microstructure with very high strength and good ductility10.1016/j.scriptamat.2015.05.008 ↗
21. The structure and mechanical properties of as-cast Zr-Ti alloys10.1016/j.jallcom.2009.08.105 ↗
22. Development of solidfication microstructure in boron-modified alloy Ti-6Al-4V-0.1B10.1016/j.actamat.2011.05.023 ↗
23. Effect of boron on the beta transus of Ti-6Al-4V alloy10.1016/j.scriptamat.2005.03.038 ↗
24. Effects of boron on microstructure in cast titanium alloys10.1016/j.scriptamat.2008.05.002 ↗
25. Nucleation and growth mechanism of α-lamellae of Ti alloy TA15 cooling from an α+β phase field10.1016/j.actamat.2012.12.025 ↗
26. Effect of hot forging on microstructure and tensile properties of Ti-TiB based composites produced by casting10.1016/j.msea.2014.04.091 ↗
27. Effects of annealing treatments on microstructure and mechanical properties of the Zr-45Ti-5Al-3V alloy10.1016/j.msea.2013.06.007 ↗
28. Effect of the annealing temperature on the microstructural evolution and mechanical properties of TiZrAlV alloy10.1016/j.matdes.2013.06.039 ↗
29. Strength and tension/compression asymmetry in nanostructured and ultrafine-grain metals10.1016/S1359-6454(03)00286-6 ↗
30. Deformation mechanism transitions in nanoscale fcc metals10.1080/09500830310001614540 ↗
31. Effect of aspect ratios of in situ formed TiB whiskers on the mechanical properties of TiBw/Ti–6Al–4V composites10.1016/j.scriptamat.2011.12.024 ↗