journal article·2018-01

Effects of annealing treatment on microstructure and mechanical property of cold-drawn 316L stainless steel fibers

Yan Wang, Haiou Yu, Yong Liu, Huiping Tang

Publisher page

Abstract

Abstract 316L stainless steel fibers with diameters of 20 and 8 µm fabricated by bundle-drawing were annealed at the temperatures from 963 to 1003 K with different holding times. Optical microscope observations, electron back-scattered diffraction (EBSD) techniques, transmission electron microscope (TEM) analyses and tensile property tests were performed in order to examine the evolutions of microstructure and mechanical properties of the fibers. Both average recrystallized grain size and volume fraction of recrystallized grains increase with increasing annealing temperature or holding time. The low values of Johnson-Mehl-Avrami-Kolmogorov (JMAK) exponent n can be attributed to the inhomogeneity of original microstructure. Twin boundaries play active roles in the process of deformation and recrystallization nucleation. The earlier initiation of recrystallization for the fiber with a diameter of 8 µm is closely related to larger deformation amount and finer original grains. The textures in the as-annealed fibers are similar with that in the as-drawn fibers, i.e., and orientations. Compared with that of orientation, the regions of orientation in the as-drawn fibers can serve as the preferential sites for recrystallization nucleation. The accelerated nucleation and limited growth of recrystallization for the fiber with a diameter of 8 µm make its recrystallized grain size keeping at a small level. Tensile strengths for the fibers decrease with the occurrence of recrystallization, and its values for the fibers annealed at 983 K for 30 min drop to almost half that of the as-drawn states. Most of the fibers exhibit limited tensile elongations with negligible plastic strain to failure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Highly permeable porous YSZ hollow fiber membrane prepared using ethanol as external coagulant10.1016/j.jallcom.2010.01.048 ↗
2. Permeability of sintered microfibrous composites for heterogeneous catalysis and other chemical processing opportunities10.1016/S0920-5861(01)00352-2 ↗
3. Bundle-drawn metal fibers
4. Metal fibers: processing /properties /applications
5. Enchanted world of metal fibers
6. Reverse transformation from α′ to γ in lightly and heavily cold-drawn austenitic stainless steel fibers10.1007/s12540-013-6003-1 ↗
7. Experimental investigation of the sedimentation of a dilute fiber suspension10.1103/PhysRevLett.77.290 ↗
8. Fabrication of high strength and ductile stainless steel fiber felts by sintering10.1007/s11837-015-1803-z ↗
9. Recrystallization and grain growth of 316L stainless steel wires10.1007/s11661-014-2305-2 ↗
10. Grain growth behavior of an as-drawn 316L stainless steel fiber after annealing treatment10.1016/j.matchar.2015.09.014 ↗
11. Static recrystallization and texture evolution of 316L stainless steel fibers10.4028/www.scientific.net/AMR.1052.45 ↗
12. Development of texture and microstructure during cold-rolling and annealing of FCC alloys: example of an austenitic stainless steel10.1016/0001-6160(89)90123-5 ↗
13. Cold-worked state and annealing behaviour of austenitic stainless steel10.1007/BF00540364 ↗
14. Continuous recrystallization in austenitic stainless steel after large strain deformation10.1016/S1359-6454(02)00013-7 ↗
15. Effect of large strains on grain boundary character distribution in AISI 304L austenitic stainless steel10.1016/j.msea.2006.11.053 ↗
16. Humphreys · 2004
17. Twinning-induced sluggish evolution of texture during recrystallization in AISI 316L stainless steel after cold rolling10.1007/BF02586209 ↗
18. Investigation on the intergranular corrosion resistance of the AISI 316L(N) stainless steel after long time creep testing at 600 °C10.1016/j.matchar.2007.05.017 ↗
19. Annealing twin formation and recrystallization study of cold-drawn copper wires from EBSD measurements10.1016/j.matchar.2006.09.009 ↗
20. Cold rolling behaviour and textural evolution in AISI 316L austenitic stainless steel10.1016/j.actamat.2005.05.006 ↗
21. The transition from discontinuous to continuous recrystallization in some aluminium alloys II – annealing behavior10.1016/j.actamat.2004.03.031 ↗
22. Studies on the evolution of annealing twins during recrystallization and grain growth in highly rolled pure nickel10.1016/j.msea.2014.11.023 ↗
23. Investigation of recrystallization and grain growth of copper and gold bonding wires10.1007/s11661-006-0189-5 ↗
24. Static recrystallization kinetics of a heavily cold drawn AZ31 magnesium alloy under annealing treatment10.1016/j.matchar.2011.01.007 ↗
25. Recrystallization behavior of a low carbon steel wire10.1016/j.phpro.2009.11.085 ↗
26. Interaction between recovery, recrystallization, and NbC strain-induced precipitation in high-Mn steels10.1007/s11661-015-3066-2 ↗
27. Deformation and annealing textures of silver wire10.1016/S0921-5093(99)00535-3 ↗
28. The evolution of annealing textures in 90 pct drawn copper wire10.1007/s11661-003-0089-x ↗
29. Recrystallization and grain growth in high purity austenitic stainless steels10.1016/S1359-6462(98)00276-0 ↗
30. Reaction kinetics in processes of nucleation and growth
31. Assessing the recovery and recrystallization kinetics of cold rolled microalloyed steel through coercive field measurements10.1016/j.msea.2017.03.033 ↗
32. Microstructure and mechanical behavior of an as-drawn MP35N alloy wire10.1016/j.msea.2014.05.046 ↗
33. Microstructure and mechanical behavior of annealed MP35N alloy wire10.1016/j.msea.2015.03.103 ↗