Microstructure evolution and mechanical properties in 1Cr low alloy steel with different heat treatments
Source abstract
Abstract
Abstract This work investigates microstructures, precipitates, and mechanical properties in 1Cr low alloy steel undergoing normalizing, quenching, and quenching-tempering treatments. The precipitated phases in these samples were removed by electrolytic extraction and characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The precipitates extracted from the normalized and tempered samples were mainly M 3 C cementite, while the major precipitates obtained from the quenched sample were identified as Nb-rich MC carbides. Energy dispersive X-ray spectroscopy (EDXS) semi-quantitatively analyzed the ratios of Fe atoms to Cr atoms in relevant phases, revealing that redistribution of Cr occurred in the tempering process but not in the normalizing or quenching processes. The tempered sample contained M 3 C carbide with a {022} twin plane and a hexagonal M 7 C 3 -type phase. Strength and elongation in the quenched sample were larger than these in normalized sample, but a significant reduction in strength and a dramatic increase in elongation occurred when the as-quenched sample was tempered.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Changes in chemical composition of carbides in 2.25Cr-1Mo power plant steel10.1179/mst.1994.10.3.193 ↗
2. Kinetics of phosphorus segregation and its effect on low temperature fracture behavior in 2.25Cr-1Mo pressure vessel steel10.1179/174328405X16243 ↗
3. Coarsening kinetics of multicomponent MC-type carbides in high-strength low-alloy steels10.1007/s11661-003-0303-x ↗
4. An investigation of the embrittlement in X20CrMoV12.1 power plant steel after long-term service exposure at elevated temperature10.1016/j.msea.2004.05.080 ↗
5. The formation of sigma-phase from delta-ferrite in a stainless steel
6. A method for quantitative analysis of delta-ferrite, sigma and M23C6 carbide phases in heat treated type 316 stainless steel weldments10.1007/BF00752268 ↗
7. The composition of eta carbide phase in 21/4Cr-1Mo steel, Metall
8. XRD analysis of carbide phase in heat resistant steels
9. Morphology and formation mechanism of bainite carbide10.1016/j.msea.2007.09.068 ↗
10. Tempering of steel10.1007/BF02642436 ↗
11. Early stages of aging and tempering of ferrous martensites10.1007/BF02659854 ↗
12. Carbide reactions (M3C→ M7C3→ M23C6→M6C) during tempering of rapidly solidified high carbon Cr-W and Cr-Mo steels10.1007/BF02661203 ↗
13. The influence of heat treatments on the microstructure of 9% chromium steels containing tungsten10.1016/S0924-0136(96)02591-5 ↗
14. The influence of microstructural aspects on the service behavior of advanced power plant steels10.2355/isijinternational.39.874 ↗
15. Creep properties affected by morphology of MX in high-Cr ferritic steels10.2355/isijinternational.41.Suppl_S116 ↗
16. Modelling of the influence of thermomechanical processing of Nb-microalloyed steel on the resulting mechanical properties10.1016/S0924-0136(98)00156-3 ↗
17. Effect of 0-0.1% Nb additions on mechanical properties of plates processed by thermomechanically controlled processing and accelerated cooling10.1179/030192301677920 ↗
18. Effect of Nb addition on the microstructure and mechanical properties of an 1800 MPa ultrahigh strength steel10.1016/j.msea.2014.11.005 ↗
19. Phase equilibrium between austenite and MX carbonitride in a 9Cr-1Mo-V-Nb steel10.2355/isijinternational.45.107 ↗
20. Overall kinetics and morphology of the products of austenite decomposition in a Fe-0.46 Pct C-5.2 Pct Cr alloy transformed isothermally above the bay10.1007/s11661-006-0117-8 ↗
21. Evolution of precipitated phases during prolonged tempering in a 9%Cr1%MoVNb ferritic-martensitic steel: influence on creep performance10.1016/j.msea.2011.01.116 ↗
22. Effects of alloying elements and microstructure on the susceptibility of the welded HSLA steel to hydrogen-induced cracking and sulfide stress cracking10.1016/j.msea.2008.11.064 ↗
23. The influence of chemical composition and microstructure of API linepipe steels on hydrogen induced cracking and sulfide stress corrosion cracking10.1016/S0921-5093(03)00217-X ↗
24. PDF-2, International Centre for Diffraction Data, PA, USA, 1994.
25. Effects of Nb on microstructure and continuous cooling transformation of coarse grain heat-affected zone in 610 MPa class high-strength low-alloy structural steels10.1016/j.msea.2007.10.118 ↗
26. Formation mechanism of granular bainite in a 30CrNi3MoV steel10.1016/j.jallcom.2008.07.110 ↗
27. Investigation on the precipitation behavior of M3C phase in T91 ferritic steels10.1016/j.nucengdes.2011.04.039 ↗
28. Correlation of microstructure with mechanical properties of 300M steel10.1007/BF02642857 ↗
29. Effect of tempering temperature on microstructure and mechanical properties of laser solid formed 300M steel10.1016/j.jallcom.2016.07.276 ↗
30. Three-dimensional atom probe characterization of alloy element partitioning in cementite during tempering of alloy steel10.1016/j.ultramic.2007.02.033 ↗
31. Chromium partitioning during isothermal transformation of a eutectoid steel10.1007/BF02642334 ↗
32. Isotherm omvandling av austenit
33. Carbide precipitation in martensite during the early stages of tempering Cr- and Mo-containing low alloy steels10.1016/S1359-6454(97)00420-5 ↗
34. The partitioning of substitutional solute elements during the tempering of martensite in Cr and Mo containing steels10.1016/0169-4332(94)00496-X ↗
35. The effects of individual addition of alloying elements on the microstructure and creep rupture strength of 12% chromium heat resisting steel10.2355/isijinternational1966.18.702 ↗
36. Quantitative study of carbonitride precipitation in niobium and titanium microalloyed hot strip steel10.1179/mst.1997.13.1.49 ↗
37. Carbide characterization in a Nb-microalloyed advanced ultrahigh strength steel after quenching-partitioning-tempering process10.1016/j.msea.2010.02.026 ↗
38. Effect of M3C on the precipitation behavior of M23C6 phase during early stage of tempering in T91 ferritic steel10.1002/srin.201100153 ↗
39. High strength-elongation product of Nb-microalloyed low-carbon steel by a novel quenching-partitioning-tempering process10.1016/j.msea.2011.07.008 ↗
40. Quantitative carbide analysis using the Rietveld method for 2.25Cr-1Mo-0.25V steel10.1016/j.matchar.2009.03.009 ↗
41. Formation of austenite in laser-processed Fe-0.2%C-20%Cr alloy10.1016/0025-5416(82)90103-3 ↗
42. Microstructure of explosively welded 0.1 Pct carbon mild steel tubes to 0.2 Pct carbon mild steel plate10.1007/BF02664784 ↗
43. Structure and mechanical properties of tempered martensite and lower bainite in Fe-Ni-Mn-C steels10.1007/BF02913881 ↗
44. The tempering of low carbon steels containing tungsten10.1007/BF02652862 ↗
45. χ-carbide formation and its transformation into cementite during the tempering of martensite10.2320/matertrans1960.13.119 ↗
46. Enhanced hardening in Cu/330 stainless steel multilayers by nanoscale twinning10.1016/j.actamat.2003.10.033 ↗
47. Study of plane defects in the cementite by transmission electron microscopy10.2320/matertrans1960.5.115 ↗
48. Transmission electron microscope study on deformation and fracture of cementite in cold-rolled steels10.2320/matertrans1960.17.149 ↗
49. Imperfections and plastic deformation of cementite in steel10.1016/0001-6160(63)90201-3 ↗
50. Ultra-high strength and high electrical conductivity in copper10.1126/science.1092905 ↗
51. Revealing the maximum strength in nanotwinned copper10.1126/science.1167641 ↗
52. High strength, epitaxial nanotwinned Ag films10.1016/j.actamat.2010.09.011 ↗
53. Effect of carbon and nitrogen on the stacking fault energy of high-alloyed iron-based austenite10.3139/146.031012 ↗
54. Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel10.1016/j.msea.2006.12.170 ↗
55. Bhadeshia · 1992
56. A model for the strength of the as-deposited regions of steel weld metals10.1007/BF02674034 ↗
57. Strength of mixtures of bainite and martensite10.1179/mst.1994.10.3.209 ↗
58. Microstructures and hardness of as-quenched martensites (0.1-0.5%C)10.1016/j.actamat.2011.05.061 ↗
59. Structure-property relationship in a 2 GPa grade micro-alloyed ultrahigh strength steel10.1016/j.jallcom.2017.02.164 ↗
60. Comparison of mechanical properties of martensite/ferrite and bainite/ferrite dual phase 4340 steels10.1016/j.msea.2009.06.057 ↗
61. Effect of microstructure on the strength of 25CrMo48V martensitic steel tempered at different temperature and time10.1016/j.matdes.2011.11.026 ↗
62. Relationship between microstructure and mechanical properties of a 5% Cr tempered martensitic tool steel10.1016/j.msea.2004.02.073 ↗
63. Assessment of toughness in long term service CrMo low alloy steel by fracture toughness and small punch test10.1016/j.nucengdes.2011.01.031 ↗