journal article·2017-07

Rate dependent tension-compression-asymmetry of Ti-61.8at%Al alloy with long period superstructures at 1050 °C

H. Chowdhury, K. Naumenko, H. Altenbach, M. Krüger

Publisher page

Abstract

Abstract Al-rich TiAl alloy system has recently become a focus of interest due to its higher oxidation resistance, 20% lower density and higher (200 °C more) operating temperature application possibility over conventional Ti-rich TiAl alloys. Tension-compression asymmetry of such type of high temperature material is an integral part of modern engineering problems. Rate dependent asymmetric phenomena of such alloys is specially important at high homologous temperature because of the appearance of one or more long period superstructures. However, micromechanical modeling endeavor of Al-rich family has not been attempted so far. In this work, we have presented two internal variable based phenomenological crystal viscoplasticity modeling approach for predicting rate dependent tension-compression asymmetry of single crystal like lamellar Ti-61.8at%Al binary alloy at hot compression state (1050 °C) by employing finite strain and finite rotation framework. Our material parameters were based on calibrating three different sets of compressive stain rate controlled plasticity data in two lamellar directions. Based on the set of identified material parameters we have predicted qualitatively the evolution of tension compression asymmetry of this alloy. It is found that tension-compression-asymmetry evolution is anisotropic and highly pronounced throughout the deformation process influenced by the lamellar morphology and long period superstructures. Slip system level operative stresses show that the slip domination and activity, more specifically, major contributing systems are different in tension and compression.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (91)

Show source-provided references
1. Role of volume fraction of second phase particles, dislocation-twin and twin-twin interactions in the reduced tension-compression yield asymmetry10.1016/j.matdes.2016.02.079 ↗
2. P. Barros, J. Alves, M. Oliveira, L. Menezes, Modelling of tension-compression asymmetry and orthotropy ON metallic materials: numerical implementation and validation, Int. J. Mech. Sci. (In press). http://dx.doi.org/10.1016/j.ijmecsci.2016.05.020.10.1016/j.ijmecsci.2016.05.020 ↗
3. Theory of creep deformation with kinematic hardening for materials with different properties in tension and compression10.1016/j.ijplas.2003.12.007 ↗
4. Hashmi · 2014
5. Asymmetry of tensile-compressive mechanical behaviors of Mg-RE-Zn alloy strengthened by long period stacking ordered phase10.1016/j.msea.2016.04.037 ↗
6. Effects of tension-compression asymmetry on the surface wrinkling of film-substrate systems10.1016/j.jmps.2016.04.014 ↗
7. Multi-axial thermo-mechanical analysis of power plant components from 9–12% cr steels at high temperature10.1016/j.engfracmech.2010.12.002 ↗
8. Ratcheting of viscoplastic material with cyclic softening, part 1: experiments on modified 9Cr-1Mo steel10.1016/j.ijplas.2004.02.001 ↗
9. A constitutive model for inelastic behavior of casting materials under thermo-mechanical loading10.1177/0309324714522034 ↗
10. Crystal orientation effect on dislocation nucleation and multiplication in FCC single crystal under uniaxial loading10.1016/j.ijplas.2013.04.010 ↗
11. Anisotropic and asymmetrical yielding and its distorted evolution10.1016/j.ijplas.2016.03.002 ↗
12. Origin of the reversed yield asymmetry in Mg-rare earth alloys at high temperature10.1016/j.actamat.2015.03.053 ↗
13. Asymmetry in the hot deformation behavior of AZ31B magnesium sheets10.1016/j.msea.2016.02.058 ↗
14. Intrinsic strength asymmetry between tension and compression of perfect face-centered-cubic crystals10.1007/s40195-016-0447-5 ↗
15. Observation of tension/compression asymmetry in an Nb-Al-V alloy10.1016/j.msea.2004.01.139 ↗
16. The role of texture in tension-compression asymmetry in polycrystalline NiTi10.1016/S0749-6419(98)00060-6 ↗
17. Analytical yield criterion for an anisotropic material containing spherical voids and exhibiting tension-compression asymmetry10.1016/j.ijsolstr.2010.10.009 ↗
18. Asymmetric yield function based on the stress invariants for pressure sensitive metals10.1016/j.ijplas.2013.11.008 ↗
19. Anisotropic yield criteria in σ-τ stress space for materials with yield asymmetry10.1016/j.ijsolstr.2015.04.006 ↗
20. Deformation mechanisms underlying tension-compression asymmetry in magnesium alloy ZK60 revealed by acoustic emission monitoring10.1016/j.msea.2014.10.081 ↗
21. Tension-compression asymmetry in homogeneous dislocation nucleation stress of single crystals Cu, Au, Ni and Ni3Al10.1016/j.msea.2014.03.018 ↗
22. Reducing tension-compression yield asymmetry by free end torsion in extruded Mg alloy10.1179/1743284715Y.0000000058 ↗
23. A. Dongare, A. Rajendran, B.L., M. Zikry, D. Brenner, Tension-compression asymmetry in nanocrystalline Cu: High strain rate vs. quasi-static deformation, Comput. Mater. Sci. 49 (2) (2010) 260–265. http://dx.doi.org/10.1016/j.commatsci.2010.05.004.10.1016/j.commatsci.2010.05.004 ↗
24. Anisotropy and tension compression asymmetry modeling of the room temperature plastic response of Ti-6Al-4V10.1016/j.ijplas.2014.10.003 ↗
25. Modeling the ductile damage process in commercially pure titanium10.1016/j.ijsolstr.2016.04.031 ↗
26. The tension/compression asymmetry of a high γ volume fraction nickel-based single-crystal superalloy10.1080/09603409.2015.1106786 ↗
27. Crystallographic orientation and size dependence of tension-compression asymmetry in molybdenum nano-pillars10.1016/j.ijplas.2011.05.015 ↗
28. Tension-compression asymmetry in severely deformed pure copper10.1016/j.actamat.2007.03.031 ↗
29. Effects of calcium and rare-earth elements on the microstructure and tension-compression yield asymmetry of ZEK100 alloy10.1016/j.msea.2014.09.023 ↗
30. Mechanical response of AZ31B magnesium alloy10.1016/j.ijplas.2013.10.006 ↗
31. S. Kurukuri, M. Worswick, T. Ghaffari, R. Mishra, J. Carter, Rate sensitivity and tension-compression asymmetry in AZ31B magnesium alloy sheet, Philosophical transactions Series A, Mathematical, physical, and engineering sciences 372. http://dx.doi.org/10.1098/rsta.2013.0216.10.1098/rsta.2013.0216 ↗
32. Tension-compression yield asymmetry in as-cast magnesium alloy10.1016/j.jallcom.2014.07.164 ↗
33. Combined effects of anisotropy and tension–compression asymmetry on the torsional response of AZ31Mg10.1016/j.ijsolstr.2015.01.001 ↗
34. Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other HCP metals10.1016/j.scriptamat.2010.05.047 ↗
35. Tension-compression asymmetry in an extruded mg alloy AM3010.1016/j.msea.2013.02.023 ↗
36. A sheet tension/compression test for elevated temperature10.1016/j.ijplas.2012.03.009 ↗
37. Effect of strain rate on the tension-compression asymmetric responses of Ti-6.6Al-3.3Mo-1.8Zr-0.29Si10.1016/j.matdes.2014.05.004 ↗
38. Tension-compression asymmetry in an extruded Mg alloy AZ3110.4028/www.scientific.net/MSF.849.109 ↗
39. Reducing the tension-compression yield asymmetry in a Mg-8Al-0.5Zn alloy via precipitation10.1016/j.scriptamat.2009.11.024 ↗
40. Reducing the tension-compression yield asymmetry of extruded Mg-Zn-Ca alloy via equal channel angular pressing10.1016/j.jma.2015.08.007 ↗
41. Reverse tension/compression asymmetry of a Mg-Y-Zn alloys containing LPSO phases10.1016/j.msea.2015.09.003 ↗
42. Solid shape recovered bulk nitinol, part I10.1016/j.msea.2011.03.060 ↗
43. Suppressing the tension-compression yield asymmetry of Mg alloy by hybrid extension twins structure10.1016/j.msea.2012.12.094 ↗
44. Reduction in tension-compression asymmetry via grain refinement and texture design in Mg-3Al-1Zn sheets10.1016/j.msea.2014.04.112 ↗
45. Tension-compression asymmetry of the (001) single crystal nickel base superalloy SC16 under cyclic loading at elevated temperatures10.1016/S1359-6454(96)00050-X ↗
46. Effect of heat treatment on tension-compression yield asymmetry of AZ80 magnesium alloy10.1016/j.matdes.2011.04.060 ↗
47. Reducing the tension-compression yield asymmetry in a hot-rolled Mg-3Al-1Zn alloy via multidirectional pre-compression10.1016/j.msea.2012.11.127 ↗
48. Experimental evaluation and constitutive modeling of non-proportional deformation for asymmetric steels10.1016/j.ijplas.2010.04.002 ↗
49. Constitutive law for AZ31B mg alloy sheets and finite element simulation for three-point bending10.1016/j.ijmecsci.2008.08.004 ↗
50. A phase mixture model for anisotropic creep of forged al-cu-mg-si alloy10.1016/j.msea.2014.09.012 ↗
51. A combined model for hardening, softening, and damage processes in advanced heat resistant steels at elevated temperature10.1177/1056789510386851 ↗
52. Tension/compression asymmetry of [001] single-crystal nickel-based superalloy DD6 during low cycle fatigue10.1016/j.msea.2013.09.013 ↗
53. An elasto-plastic constitutive model for evolving asymmetric/anisotropic hardening behavior of AZ31B and ZEK100 magnesium alloy sheets considering monotonic and reverse loading paths10.1016/j.ijplas.2015.03.004 ↗
54. Naumenko · 2016
55. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling10.1016/j.actamat.2009.10.058 ↗
56. Yielding behavior of aluminum-rich single crystalline γ-tial10.1016/S1359-6454(03)00451-8 ↗
57. D. Sturm, Herstellung und eigenschaften al-reichertial legierungen, (Ph.D. thesis), OvGU Magdeburg (2010).
58. Polysynthetic twinned tial single crystals for high-temperature applications10.1038/nmat4677 ↗
59. Modeling concepts for intermetallic titanium aluminides10.1016/j.pmatsci.2016.01.001 ↗
60. Deformation induced anisotropic responses of Ti-6Al-4V alloy part II10.1016/j.ijplas.2012.03.013 ↗
61. Current status of gamma Ti aluminides for aerospace applications10.1016/S1359-0286(99)00029-7 ↗
62. Creep strength of centrifugally cast Al-rich tial alloys10.1016/j.msea.2008.01.102 ↗
63. Phases and evolution of microstructures in Ti-60at%Al10.1016/j.actamat.2012.03.021 ↗
64. Time-dependent creep of a dual-phase viscoplastic material with lamellar structure10.1016/S0749-6419(98)00021-7 ↗
65. A crystal plasticity materials constitutive model for polysynthetically-twinned γ-TiAl+α2-Ti3Al single crystals10.1023/A:1017942117952 ↗
66. Phase orientation relationships in the TiAl-TiAl2 region10.1016/S0921-5093(01)00972-8 ↗
67. Plastic deformation behaviour and deformation substructure in Al-rich TiAl single crystals deformed at high temperatures10.1016/S1468-6996(01)00073-0 ↗
68. Formation and stability of transitional long-period superstructures in Al-rich TiAl single crystals10.1080/01418610208243201 ↗
69. Formation lamellar microstructures Al-rich TiAl alloys between 900 to 1100°C10.1016/S0966-9795(00)00125-4 ↗
70. Appel · 2011
71. On modeling the development of crystallographic texture in bulk forming processes10.1016/0749-6419(89)90020-X ↗
72. Microstructure-based crystal plasticity modeling of cyclic deformation of Ti-6Al-4V10.1016/j.ijplas.2006.11.009 ↗
73. S. Conti, K. Hackl, Analysis and Computation of Microstructure in Finite Plasticity, Springer International Publishing Switzerland, 2015. http://10.1007/978-3-319-18242-1.10.1007/978-3-319-18242-1 ↗
74. M. Kuroda, Plasticity and Beyond: Microstructures, Crystal-Plasticity and Phase Transitions, Springer Vienna, 2014, Ch. On scale-dependent crystal plasticity models, pp. 305–353. http://dx.doi.org/10.1007/978-3-7091–1625-8_5.10.1007/978-3-7091-1625-8_5 ↗
75. Single crystal modeling for structural calculations: part 1-model presentation10.1115/1.2903374 ↗
76. A review of some plasticity and viscoplasticity constitutive theories10.1016/j.ijplas.2008.03.009 ↗
77. Viscoplasticity of heterogeneous metallic materials10.1016/j.mser.2008.04.003 ↗
78. A microstructure-sensitive constitutive modeling of the inelastic behavior of single crystal nickel-based superalloys at very high temperature10.1016/j.ijplas.2014.03.004 ↗
79. Latent hardening and plastic anisotropy evolution in AA6060 aluminium alloy10.1016/j.ijplas.2015.07.010 ↗
80. Single-crystal elastic constants of gamma-TiAl10.1080/095008396181019 ↗
81. Elastic constants and thermal expansion of single crystal γ-tial from 300 to 750K10.1016/S0921-5093(97)00575-3 ↗
82. Physical constants, deformation twinning, and microcracking of titanium aluminides10.1007/s11661-998-0158-2 ↗
83. First-principles studies of typical long-period superstructures Al5Ti3, h-Al2Ti and r-Al2Ti in Al-rich TiAl alloys10.1016/j.commatsci.2010.12.001 ↗
84. Five-power-law creep in single phase metals and alloys10.1016/S0079-6425(99)00006-7 ↗
85. Modelling the orientation and direction dependence of the critical resolved shear stress of nickel-base superalloy single crystals10.1016/S1359-6454(99)00404-8 ↗
86. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B10.1016/j.ijplas.2004.05.018 ↗
87. The role of superdislocations for modeling plastic deformation of lamellar TiAl10.1016/j.ijplas.2006.02.005 ↗
88. Lattice defects and their influence on the deformation behavior of single crystals of TiAl10.1016/S0921-5093(01)01610-0 ↗
89. Effects of Al concentration and resulting long-period superstructures on the plastic properties at room temperature of Al-rich TiAl single crystals10.1080/14786430500079728 ↗
90. Plastic flow of γ-TiAl-based polysynthetically twinned crystals10.1016/S1359-6454(98)00132-3 ↗
91. Temperature dependence of yield stress, deformation mode and deformation structure in single crystals of TiAl (Ti-56 at% Al)10.1080/01418619708205149 ↗