journal article·2017-05

Shock-induced phase transitions and its effect on the spall fracture behavior of a metastable β titanium alloy

Yu Ren, Xiaodong Yu, Chengwen Tan, Fuchi Wang, Hongnian Cai

Publisher page

Abstract

Abstract Plate impact experiments were performed on a metastable β titanium alloy, Ti–10Mo–8V–1Fe–3.5Al, to investigate the influence of phase transitions on its spall fracture behavior during shock loading pulse. Both shock-induced β-to-α″ and forward/reverse β-to-ω phase transformations occur in Ti–10Mo–8V–1Fe–3.5Al. The spall strength drops off by nearly 12.5% compared with the maximum value as the shock pressure exceeds 9 GPa, due to the more obvious intergranular fracture characteristics and the promotion of residual ω and α″ on nucleation and propagation of micro damages. Ti–10Mo–8V–1Fe–3.5Al spalls through the nucleation, growth, and coalescence of micro voids formed in α″ martensite laths or internal interfaces of materials, resulting in the appearance of rugged spall fracture surfaces covered by ductile dimples. The high amplitude elastic wave overcomes the plastic waves comprising β-to-ω/α″ processes, leading to the absence of the inflection point relevant to phase transitions in wave profiles recorded by VISAR.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · High-pressure geophysics and materials · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. A method of measuring the pressure produced in the detonation of high explosives or by the impact of bullets10.1098/rsta.1914.0010 ↗
2. Dynamic fracture (spalling) of metals10.1016/0079-6425(83)90003-8 ↗
3. Meyers · 1994
4. Gas gun for impact studies10.1063/1.1684739 ↗
5. On the behaviour of the magnesium alloy, AZ61 to one-dimensional shock loading10.1016/j.actamat.2010.06.042 ↗
6. Calibration of foil-like manganin gauges in planar shock wave experiments10.1063/1.328155 ↗
7. Laser interferometer for measuring high velocities of any reflecting surface10.1063/1.1660986 ↗
8. Influence of shock-wave deformation on the structure/property behavior of materials
9. Spall studies on Ti–6Al–4V10.1016/0025-5416(87)90469-1 ↗
10. S.V. Razorenov, G.I. Kanel, A.V. Utkin, A.A. Bogach, M. Burkins, W.A. Gooch, Dynamic strength and edge effects at spall fracture for titanium alloys of varying oxygen content, in: AIP Conf. Proc. 505, 2000, pp. 415–418.10.1063/1.1303505 ↗
11. D.P. Dandekar, S.V. Spletzer, Shock response of Ti–6Al–4V, in: AIP Conf. Proc. 505, 2000, pp. 427–430.10.1063/1.1303508 ↗
12. The role of thermal activation on dynamic stress-induced inelasticity and damage in Ti–6Al–4V10.1016/S0167-6636(01)00079-5 ↗
13. C. Tyler, J.C.F. Millett, N.K. Bourne, Spallation in Ti–6Al–4V: stress measurements and recovery, in: AIP Conf. Proc. 845, 2006, pp. 674–677.10.1063/1.2263412 ↗
14. An experimental investigation into the micro-mechanics of spall initiation and propagation in Ti–6Al–4V during shock loading10.1016/j.msea.2013.04.055 ↗
15. Shock-induced phase transformation and vortex instabilities in shock loaded titanium alloys10.1007/s001930050178 ↗
16. Affect of shock-induced phase transformations on dynamic strength of titanium alloys10.1016/S0734-743X(01)00105-1 ↗
17. Spall strength of titanium alloys10.1016/j.physme.2010.07.002 ↗
18. Joshi · 2006
19. Pseudo-elastic deformation behavior in a Ti/Mo-based alloy10.1016/j.scriptamat.2003.10.012 ↗
20. Influence of β grain size on tensile behavior and ductile fracture toughness of titanium alloy Ti–10V–2Fe–3Al10.1007/s11661-006-0087-x ↗
21. Influence of α morphology and volume fraction on the stress-induced martensitic transformation in Ti–10V–2Fe–3Al10.1016/j.msea.2011.03.107 ↗
22. Influence of strain rate on stress induced martensitic transformation in β solution treated TB8 alloy10.1016/j.compositesa.2013.07.001 ↗
23. Strengthening of titanium alloys by shock deformation
24. Effect of shock-induced martensite transformation on the postshock mechanical response of metastable β titanium alloys10.1016/j.jallcom.2013.07.028 ↗
25. Mechanical response and effects of β-to-α″ phase transformation on the strengthening of Ti–10V–2Fe–3Al during one-dimensional shock loading10.1016/j.msea.2012.10.098 ↗
26. Behavior of the shape memory alloy NiTi during one-dimensional shock loading10.1063/1.1498877 ↗
27. The shock-induced mechanical response of the shape memory alloy, NiTi10.1016/j.msea.2003.10.334 ↗
28. Antoun · 2002
29. Shock-induced mechanical response and spall fracture behavior of an extra-low interstitial grade Ti–6Al–4V alloy10.1016/j.msea.2013.04.080 ↗
30. Adiabatic shear bands in a TI–6Al–4V titanium alloy10.1016/S0022-5096(98)00044-1 ↗
31. Formation and reversion of stress induced martensite in Ti–10V–2Fe–3Al10.1016/0001-6160(82)90137-7 ↗
32. Omega phase in materials10.1016/0079-6425(82)90002-0 ↗
33. The influence of oxygen content on the α to ω phase transformation and shock hardening of titanium10.1063/1.2209540 ↗
34. Phase transitions under shock-wave loading10.1103/RevModPhys.49.523 ↗
35. Pressure-induced α→ω transition in titanium metal: a systematic study of the effects of uniaxial stress10.1016/j.physb.2004.10.030 ↗
36. Direct evidence of intermediate state during alpha-omega transformation in Ti-V alloy10.1016/0001-6160(80)90146-7 ↗
37. Impurities block the α to ω martensitic transformation in titanium10.1038/nmat1292 ↗
38. Trigger stress for stress-induced martensitic transformation during tensile deformation in Ti–Al–Nb Alloys: Effect of grain size10.1007/s11661-007-9432-y ↗