journal article·2017-04

Matrix switch related to microstructural connectivity and its effect on strength in metals with duplex microstructure

Nobuo Nakada, Shouhei Kawasaki, Yuuki Kogakura, Toshihiro Tsuchiyama, Setsuo Takaki

Publisher page

Abstract

Abstract To understand the microstructural factors dominantly affecting the mechanical properties of metals with duplex microstructures on a mesoscale, the change in the 0.2% proof stress as a function of the hard austenite fraction of an Fe–Ni austenitic alloy having a duplex microstructure composed of soft and hard austenite was investigated in terms of the microstructural connectivity. The 0.2% proof stress continuously increased with increasing fraction of the hard austenite. However, the strengthening behavior changed when the hard austenite fraction exceeded a critical value; the 0.2% proof stress shifted from the lower limit stress to the upper limit one calculated by secant method at the critical fraction. This demonstrates that the matrix of duplex microstructure was switched from soft austenite to hard austenite at the critical fraction. On the other hand, it was also confirmed that the non-monotonic strengthening behavior has a good correlation with the microstructural connectivity of the hard austenite, that is, the percolation phenomenon. From these result, it was concluded that the strength of metals with duplex microstructure can be wholly predicted based on secant method while taking into account the matrix switching between soft and hard phases, and the percolation index has a possibility to be a useful parameter to distinguish between soft and hard phases which is the matrix of the duplex microstructure, although further investigation is needed on a degree of the hard phase connection.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. The mechanical properties of zero carbon ferrite plus martensite structures10.1007/BF02646397 ↗
2. The tensile strength and ductility of continuous fiber composites10.1007/BF00555312 ↗
3. Tensile deformation of two ductile phase alloys: flow curves of a–γ FeCrNi alloys10.1016/0025-5416(76)90097-5 ↗
4. Work hardening of continuously annealed dual phase steels10.2355/isijinternational1966.17.710 ↗
5. Tensile behavior of ferrite-martensite dual phase steels with nano-precipitation of vanadium carbides10.2355/isijinternational.ISIJINT-2015-106 ↗
6. Mechanical behavior of steels consisting of two ductile phases10.2355/isijinternational1966.22.665 ↗
7. Upper and lower bounds in flow stress of a dual phase steel predicted by the secant method and related microstructure10.2355/tetsutohagane1955.83.12_827 ↗
8. Dual phase structure formed by partial reversion of sold-deformed martensite10.1016/j.msea.2012.06.001 ↗
9. Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel10.1016/j.msea.2014.02.058 ↗
10. Hierarchical strain distribution analysis formed in DP steel using a combination of metallographic image and digital image correlation method10.2355/tetsutohagane.100.1238 ↗
11. Krauss · 1961
12. Fine structure of austenite produced by the reverse martensitic transformation10.1016/0001-6160(63)90085-3 ↗
13. On the nature of the martensite to austenite reverse transformation10.1016/0001-6160(67)90224-6 ↗
14. Cyclic transformation in Fe-Ni-C alloys
15. Strengthening of austenite in some high-alloy steels by rapid austenitizing
16. The effect of heating rate on the martensite to austenite transformation in Fe-Ni-C alloys10.1016/0001-6160(72)90077-6 ↗
17. Direct observation of martensitic reversion from lenticular martensite to austenite in Fe-Ni alloy10.1016/j.matlet.2016.10.056 ↗
18. Micromechanical determination of two-phase plasticity10.1016/0749-6419(85)90008-7 ↗
19. The overall elastoplastic stress-strain relations of dual-phase metals10.1016/0022-5096(90)90007-Q ↗
20. A self-consistent mechanics of composite materials10.1016/0022-5096(65)90010-4 ↗
21. An extension of the self-consistent scheme to plastically flowing polycrystal10.1016/0022-5096(78)90003-0 ↗
22. Image-based calculation of stress-strain curve of the two-phase microstructure on the basis of the modified secant method10.2355/isijinternational.52.723 ↗
23. Stress-strain curves of steels10.2355/tetsutohagane.100.1191 ↗
24. The determination of the elastic field of an ellipsoidal inclusion and related problems
25. Average stress in matrix and average elastic energy of materials with misfitting inclusions10.1016/0001-6160(73)90064-3 ↗
26. JSME Data Book · 2001
27. Stauffer · 1985
28. Odagaki · 1993
29. Electrical resistivity of composites10.1111/j.1151-2916.1990.tb07576.x ↗
30. The mechanism of the martensite burst transformation in Fe-Ni single crystals10.1016/0001-6160(63)90024-5 ↗
31. Couplings of thin-plate martensites in an Fe-Ni-C Alloy10.2320/matertrans1960.19.674 ↗