Effect of strength and ductility on anti-penetration performance of low-carbon alloy steel against blunt-nosed cylindrical projectiles
Source abstract
Abstract
Abstract As a traditional protective material, steel has been developing towards higher strength and better ductility. The dynamic mechanical behavior, ballistic resistance, together with the deformation and fracture modes of steels vary with the characteristics of strength and ductility. In this study, three kinds of low-carbon alloy steel including Q235A, 10CrNiMo and 22SiMnTi, which have great differences in strength and ductility, were selected as research objectives. To compare the anti-penetration performance of these steel plates subjected to the ultra-high strength blunt-nosed cylindrical projectiles, the perforation tests were conducted with the impact velocity of 750±5 m/s in both. The analysis of pre and post-impact microstructure indicates that with the densest lath martensite structure, the highest strength steel 22SiMnTi forms adiabatic shearing fracture as the stress exceeds the shear strength; with better ductility, Q235A and 10CrNiMo are characterized by more compact post-impact microstructures and obvious plastic flow. Consistent with above analysis, the validation tests showed that 10CrNiMo exhibited the best resistance to blunt-nosed cylindrical projectiles, and followed by 22SiMnTi and Q235A. The excellent anti-penetration performance of low-carbon alloy steel is due to the integrated optimization of strength and ductility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Structural Response to Dynamic Loads · Energetic Materials and Combustion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Cui · 2013
2. Ballistic performance of Q235 metal plates subjected to impact by blunt-nosed projectiles
3. Børvik · 2001
4. Research progress of the bulletproof metal
5. Ballistic perforation of surface hardened mild steel plates
6. J. Holmen, J. Solberg, O. Hopperstad, T. Børvik, Ballistic perforation of layered and surface-hardened steel plates. In: Proceedings of the 1st International Conference on Impact Loading of Structures and Materials, Politecnico di Torino, Italy, 22–26 May, 2016.
7. Hypervelocity impact into a high strength and ductile steel alloy10.1016/j.ijimpeng.2008.07.008 ↗
8. The ballistic performance of an ultra-high hardness armour steel: an experimental investigation10.1016/j.ijimpeng.2016.03.011 ↗
9. Effect of heat treatment on mechanical and ballistic properties of a high strength armour steel10.1016/j.ijimpeng.2009.09.003 ↗
10. Effect of tempering temperature, plate thickness and presence of holes on ballistic impact behavior and ASB formation of a high strength steel10.1016/j.ijimpeng.2011.12.004 ↗
11. Effect of tempering time on the ballistic performance of a high strength armour steel10.1016/j.jart.2016.02.002 ↗
12. Studies on the role of microstructure on performance of a high strength armour steel10.1016/j.engfailanal.2007.11.011 ↗
13. Ballistic behaviour of tempered steel armour plates under plane strain condition10.14429/dsj.48.3896 ↗
14. The influence of plate hardness on the ballistic penetration of thick steel plates10.1016/0734-743X(94)00041-T ↗
15. Experimental investigation on the ballistic resistance of monolithic and multi-layered plates against hemispherical-nosed projectiles impact10.1016/j.matdes.2012.05.021 ↗
16. Experimental investigation on the ballistic performance of monolithic and layered metal plates subjected to impact by blunt rigid projectiles10.1016/j.ijimpeng.2012.06.001 ↗
17. Experimental investigation on the ballistic resistance of monolithic and multi-layered plates against ogival-nosed rigid projectiles impact10.1016/j.matdes.2012.06.048 ↗
18. Experimental investigation on the ballistic performance of double-layered plates subjected to impact by projectile of high strength10.1016/j.ijimpeng.2014.03.003 ↗
19. The ballistic performance of metal plates subjected to impact by projectiles of different strength10.1016/j.matdes.2013.12.073 ↗
20. Low-velocity impact on multi-layered dual-phase steel plates10.1016/j.ijimpeng.2014.12.005 ↗
21. The effect of target strength on the perforation of steel plates using three different projectile nose shapes10.1016/j.ijimpeng.2004.06.004 ↗
22. Perforation resistance of five different high-strength steel plates subjected to small-arms projectiles10.1016/j.ijimpeng.2008.12.003 ↗
23. Effect of target thickness in blunt projectile penetration of Weldox 460 E steel plates10.1016/S0734-743X(02)00072-6 ↗
24. Ballistic penetration of steel plates10.1016/S0734-743X(99)00011-1 ↗
25. Qian · 1984
26. Effect of double quenching on tensile strength of 35CrMnSi steel
27. Lv · 2006
28. Effect of alloy content and rolling process on steel performance of 10CrNi3MoV
29. Research of heat treatment process for 22SiMn2TiB
30. G. Cowper, P. Symonds, Strain Hardening and Strain Rate Effect in the Impact Loading of Cantilever Beams, 1957.10.21236/AD0144762 ↗
31. The use of flat-ended projectiles for determining dynamic yield stress. II. Tests on various metallic materials10.1098/rspa.1948.0082 ↗
32. A numerical study on the deformation and fracture modes of steel projectiles during Taylor bar impact tests10.1016/j.ijsolstr.2013.11.008 ↗
33. R. Recht, In: Proceedings of the 14th SES Aunual Meeting, Lehigh University, Bethleham, 1977.
34. Taylor ballistic impact modelling applied to deformation and mass loss determinations10.1016/0020-7225(78)90067-8 ↗
35. Zukas · 1990
36. Jiang · 1995