journal article·2016-04Open access

Flow transitions and flow localization in large-strain deformation of magnesium alloy

Dinakar Sagapuram, Mert Efe, Kevin P. Trumble, Srinivasan Chandrasekar

Abstract

Abstract Understanding transitions from homogeneous to localized flow, and mechanisms underlying flow localization, is of paramount importance for deformation processing of magnesium. In this study, a shear-based deformation method is utilized for imposing large strains ( ∼ 1 ), under controllable strain rates (10–10 5 /s) and temperatures (80–300 °C), in order to examine flow patterns in a magnesium alloy. Based on microstructure characterization, deformation twinning is suggested to contribute to the localized flow at temperatures below 200 °C and at low strain rates. The transition from the localized to homogeneous flow with increasing temperature is due to reduction in twinning activity, and enhanced strain-rate sensitivity. At constant temperature, an increase in the strain rate decreases the propensity for flow localization. A model is presented for characterizing the maximum uniform strain as a function of temperature and deformation state (simple shear, plane-strain compression). The model incorporates temperature-sensitive microstructural changes and flow properties of magnesium into a classical framework to capture the flow localization phenomena at low temperatures and strain rates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. F. Zarandi, S. Yue, Magnesium sheet: challenges and opportunities, in: F. Czerwinski (Ed.), Magnesium Alloys – Design, Processing and Properties, InTech, Rijeka, Croatia, 2011, pp. 297–320.10.5772/13989 ↗
2. Microstructure, crystallographic texture and mechanical properties of the magnesium alloy AZ31B after different routes of thermo-mechanical processing10.1016/j.ijplas.2012.03.007 ↗
3. Influence of texture on dynamic recrystallization and deformation mechanisms in rolled or ECAPed AZ31 magnesium alloy10.1016/j.msea.2007.11.024 ↗
4. Microstructure and mechanical properties of Mg–Al–Zn alloy sheets severely deformed by asymmetrical rolling10.1016/j.scriptamat.2006.09.034 ↗
5. Effect of equal-channel angular rolling pass on microstructure and properties of magnesium alloy sheets10.1080/10426910601015907 ↗
6. Deformation microstructures and textures of some cold rolled Mg alloys10.1016/S0921-5093(04)00942-6 ↗
7. The processing of difficult-to-work alloys by ECAP with an emphasis on magnesium alloys10.1016/j.actamat.2007.04.043 ↗
8. Deformation and fracture during equal channel angular pressing of AZ31 magnesium alloy10.1016/j.msea.2007.09.063 ↗
9. Strain localisation patterns under equal-channel angular pressing10.1016/j.jmps.2008.09.012 ↗
10. Flow localization during severe plastic deformation of AZ81 magnesium alloy10.1016/j.msea.2013.05.069 ↗
11. The crystallographic characteristics of fracture in magnesium single crystals10.1016/0001-6160(57)90075-5 ↗
12. {112¯2}〈1¯1¯23〉 slip system in magnesium10.1016/0001-6160(73)90141-7 ↗
13. On the thermally activated mechanism of prismatic slip in magnesium single crystals
14. Twinning and the ductility of magnesium alloys10.1016/j.msea.2007.02.109 ↗
15. Softening and dynamic recrystallization in magnesium single crystals during c-axis compression10.1016/j.actamat.2011.10.013 ↗
16. Texture effects on development of shear bands in rolled AZ31 alloy10.1016/j.msea.2012.06.083 ↗
17. Mechanisms of exceptional ductility of magnesium single crystal during deformation at room temperature10.1016/j.actamat.2014.04.066 ↗
18. Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK6010.1016/S1359-6454(01)00020-9 ↗
19. Dynamic recrystallization in pure magnesium10.2320/matertrans.42.1928 ↗
20. Twinning, dynamic recovery and recrystallization in hot worked Mg–Al–Zn alloy10.1016/S0921-5093(02)00007-2 ↗
21. Evolution of microstructure and microtexture during the hot deformation of Mg–3% Al10.1016/j.actamat.2010.04.017 ↗
22. Mechanics of large strain extrusion machining and application to deformation processing of magnesium alloys10.1016/j.actamat.2012.01.018 ↗
23. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
24. Occurrence of shear bands in heavily rolled cubic metals10.1179/msc.1979.13.2.73 ↗
25. Adiabatic shear failure and dynamic stored energy of cold work10.1103/PhysRevLett.96.075502 ↗
26. Twinning and texture development in two Mg alloys subjected to loading along three different strain paths10.1016/j.actamat.2007.03.006 ↗
27. Shear accommodation kinking at second order twins in magnesium
28. Plastic stability in tension and compression10.1016/0001-6160(76)90039-0 ↗
29. Plastic instability and flow localization in shear at high rates of deformation10.1016/0001-6160(84)90080-4 ↗
30. Thermo-plastic instability in simple shear10.1016/0022-5096(82)90029-1 ↗
31. Modelling of formula for flow stress of a magnesium alloy AZ31 sheet at elevated temperatures10.1016/j.jmatprotec.2005.02.034 ↗
32. Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures10.1016/j.ijplas.2010.08.009 ↗
33. High temperature compressive properties over a wide range of strain rates in an AZ31 magnesium alloy10.1007/s10853-005-0656-1 ↗
34. Strain-rate sensitivity and microstructural evolution in a Mg–Al–Zn alloy10.1016/j.scriptamat.2010.06.047 ↗
35. Effect of texture on high temperature deformation behavior at high strain rates in a Mg–3Al–1Zn alloy10.1016/j.msea.2009.06.019 ↗
36. Deformation field in large-strain extrusion machining and implications for deformation processing10.1016/j.scriptamat.2011.10.045 ↗
37. Controlling texture in magnesium alloy sheet by shear-based deformation processing10.1016/j.actamat.2013.07.063 ↗
38. Shear-plane temperature distribution in orthogonal cutting10.1115/1.4014682 ↗
39. Deformation mechanisms responsible for the high ductility in a Mg AZ31 alloy analyzed by electron backscattered diffraction10.1007/s11661-005-0235-8 ↗
40. Semiatin · 1984
41. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B10.1016/j.ijplas.2004.05.018 ↗
42. Effective strain rate sensitivity of two phase materials10.1016/j.msea.2009.06.041 ↗
43. Calculation of Schmid factors in magnesium10.1016/j.scriptamat.2012.05.042 ↗