journal article·2016-03

Core–shell structured al-matrix composite with enhanced mechanical properties

Feng Gao, Cong Xu, Haiping Zhang, Wenlong Xiao, Kei Ameyama, Chaoli Ma

Publisher page

Abstract

Abstract Al-matrix composites with different contents of core–shell structured B4Cp–Cu reinforcement were prepared by electrolessly coating Cu on B4Cp and hot sintering the mixture of B4Cp–Cu and Al powder. The influences of solution treatment on the microstructure and mechanical properties were investigated. The results showed that the initial Cu shell was changed into Al2Cu shell, and part of Cu was dissolved into the Al matrix after solution treatment at 540 °C. With increasing solution dwelled time, the yield strength, ultimate compressive strength and ductility were improved gradually. As compared with the pure B4Cp reinforcement, the introduction of core–shell structured B4Cp-Cu and subsequent solution treatment improved the mechanical properties of Al-matrix composite. The improvement of mechanical properties is attributed to the fact that the Al2Cu shell moderates the modulus mismatch and enhances the interface bonding between Al and B4Cp, and that heat treatment introduces solution strengthening of Cu element into the Al matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. The production and application of metal matrix composite materials10.1016/S0924-0136(00)00639-7 ↗
2. The processing of metal matrix composites — an overview10.1016/S0924-0136(96)02645-3 ↗
3. Adhesive wear behaviour of B4C and SiC reinforced 4147 Al matrix composites (Al/B4C–Al/SiC)10.1016/j.jmatprotec.2005.02.207 ↗
4. Effect of various processing methods on the interfacial reactions in SiCp/2024 Al composites10.1016/S1359-6454(97)84851-3 ↗
5. Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study10.1016/S0924-0136(03)00815-X ↗
6. Effects of interfacial debonding on the rate-dependent response of metal matrix composites10.1016/j.actamat.2005.07.004 ↗
7. Influence of interfaces on the mechanical behavior of SiC particulate-reinforced Al–Zn–Mg–Cu composites10.1016/j.msea.2015.07.050 ↗
8. Effect of extrusion and particle volume fraction on the mechanical properties of SiC reinforced Al–Cu alloy composites10.1016/j.msea.2010.07.017 ↗
9. The electroless deposition of nickel on SiC particles for aluminum matrix composites10.1016/j.surfcoat.2003.10.150 ↗
10. Mechanical behavior of B4C particulate-reinforced 7091 aluminum composite10.1016/0036-9748(89)90044-6 ↗
11. Fabrication and characterization of hybrid structured Al alloy matrix composites reinforced by high volume fraction of B4C particles10.1016/j.msea.2014.02.032 ↗
12. Dry sliding friction and wear properties of B4C particulate-reinforced Al-5083 matrix composites10.1016/j.wear.2007.04.006 ↗
13. Effect of Ar gas pressure on growth, structure, and mechanical properties of sputtered Ti, Al, TiAl, and Ti3Al films10.1016/0040-6090(95)06990-9 ↗
14. Temperature and pressure dependences of the elastic properties of ceramic boron carbide (B4C)10.1023/A:1015825318086 ↗
15. Pfeifer S., Grossmann S., Freudenberger R., et al. Characterization of Intermetallic Compounds in Al-Cu-Bimetallic Interfaces[C]. Electrical Contacts (Holm), 2012 IEEE 58th Holm Conference on, 2012: 1-6.10.1109/HOLM.2012.6336554 ↗
16. L.e. · Electroless copper employing hypophosphite as a reducing agent[P] · 2000
17. Study on diffusion behavior and microstructural evolution of Al/Cu bimetal interface by synchrotron X-ray radiography10.1016/j.jallcom.2014.07.172 ↗
18. Thermo-physical properties of boron carbide reinforced copper composites fabricated by electroless deposition process10.1016/j.matdes.2012.09.053 ↗
19. Chemical reactivity of aluminium with boron carbide10.1023/A:1018625402103 ↗
20. Warm compression tests of aluminum alloy10.1361/105994998770347611 ↗
21. Research on relationship between elasticmodules and interfacial bonding in sic particle reinforced metal matrix composites
22. Effect of an interphase layer on the dynamic stress concentration in a Mg-matrix surrounding a SiC-particle10.1016/j.compstruct.2009.04.011 ↗