journal article·2016-02

Microstructure and mechanical properties improvement by ultra-rapid annealing of severely deformed low-carbon steel

M.A. Mostafaei, M. Kazeminezhad

Publisher page

Abstract

Abstract Ultra-rapid annealing (URA) of deformed low-carbon steel can provide refined microstructure. In this research, severely deformed low-carbon steel is ultra-rapidly annealed to subcritical and intercritical temperature ranges at the heating rates of 75–1800 °C/s and then rapidly cooled. Also, conventional annealing by the heating rate of 0.3 °C/s is performed at the same temperature ranges. The results show that conventional and subcritical ultra-rapid annealing cannot lead to a fully refined microstructure. High heating rate causes the interaction between recrystallization and transformation as the temperature exceed Ac 1 (intercritical temperature range). High kinetics of transformation during intercritical ultra-rapid annealing and interaction lead to the fully refined recrystallized microstructure. During subcritical conventional annealing of severely deformed sample, hardness is reduced gradually to the hardness of as-received sample. In contrast, URA increases the hardness in subcritical range due to solid solute carbon. Around Ac 1 , hardness is dropped down because of accelerated recrystallization, and it is increased again in higher intercritical temperature due to increase of harder phases formed from austenite during cooling. Samples ultra-rapidly annealed in intercritical temperature range have higher hardness, strength and ductility than those of the samples annealed in subcritical range due to the presence of both types of ferrites; refined recrystallized primary ferrite and secondary ferrites formed from austenite during cooling after URA.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Shin · Acta Mater. · 2000 · 48 · 324510.1016/S1359-6454(00)00090-2 ↗
2. Park · Mater. Sci. Eng. A · 2002 · 334 · 7910.1016/S0921-5093(01)01796-8 ↗
3. Ivanisenko · Scr. Mater. · 2003 · 49 · 94710.1016/S1359-6462(03)00478-0 ↗
4. Khodabakhshi · Mater. Sci. Eng. A · 2011 · 528 · 521210.1016/j.msea.2011.03.024 ↗
5. Wang · Bull. Mater. Sci. · 2011 · 34 · 147710.1007/s12034-011-0346-3 ↗
6. Gorelik · 1981
7. Massardier · Mater. Sci. Eng. A · 2010 · 527 · 565410.1016/j.msea.2010.05.024 ↗
8. Muljono · Mater. Sci. Eng. A · 2001 · 303 · 9010.1016/S0921-5093(00)01882-7 ↗
9. A. Arlazarov, G.L. Brollo, C. Magar, Metal 2014, EU; 05/2014, Brno, Czech Republic
10. Xu · J. Alloy. Compd. · 2014 · 614 · 9410.1016/j.jallcom.2014.06.075 ↗
11. Li · J. Alloy. Compd. · 2013 · 578 · 32010.1016/j.jallcom.2013.05.226 ↗
12. Azizi-Alizamini · Metall. Mater. Trans. A · 2011 · 42 · 154410.1007/s11661-010-0551-5 ↗
13. Zheng · Acta Mater. · 2013 · 61 · 550410.1016/j.actamat.2013.05.040 ↗
14. Petrov · Mater. Sci. Forum · 2012 · 715–716 · 66110.4028/www.scientific.net/MSF.715-716.661 ↗
15. Stockemer · Metall. Mater. Trans. A · 2003 · 34 · 134110.1007/s11661-003-0245-3 ↗
16. Chowdhury · Mater. Sci. Eng. A · 2008 · 480 · 54010.1016/j.msea.2007.07.060 ↗
17. Lesch · Metall. Mater. Trans. A · 2007 · 38 · 188210.1007/s11661-006-9052-y ↗
18. Lesch · 2006
19. Karmakar · Mater. Sci. Eng. A · 2013 · 564 · 38910.1016/j.msea.2012.11.109 ↗
20. L'vov · Met. Sci. Heat Treat. Met. · 1959 · 1 · 1110.1007/BF00820268 ↗
21. Chbihi · J. Mater. Sci. · 2014 · 49 · 360810.1007/s10853-014-8029-2 ↗
22. Meng · Mater. Des. · 2014 · 58 · 19410.1016/j.matdes.2014.01.055 ↗
23. Mohanty · Metall. Mater. Trans. A · 2011 · 42 · 368010.1007/s11661-011-0753-5 ↗
24. Peranio · Mater. Sci. Eng. A · 2010 · 527 · 416110.1016/j.msea.2010.03.028 ↗
25. Reis · ISIJ Int. · 2003 · 43 · 126010.2355/isijinternational.43.1260 ↗
26. Ferry · ISIJ Int. · 2001 · 41 · 105310.2355/isijinternational.41.1053 ↗
27. Álvarez · Mater. Sci. Forum · 2005 · 500–501 · 77110.4028/www.scientific.net/MSF.500-501.771 ↗
28. Khodabakhshi · Mater. Sci. Eng. A · 2010 · 527 · 404310.1016/j.msea.2010.03.005 ↗
29. Khodabakhshi · Mater. Des. · 2011 · 32 · 328010.1016/j.matdes.2011.02.032 ↗
30. De Knijf · Mater. Sci. Eng. A · 2015 · 627 · 18210.1016/j.msea.2014.12.118 ↗
31. Gutiérrez · Mater. Sci. Forum · 2007 · 560 · 2910.4028/www.scientific.net/MSF.560.29 ↗
32. Larouk · Phys. Procedia · 2009 · 2 · 122310.1016/j.phpro.2009.11.085 ↗
33. Huang · Metall. Mater. Trans. A · 2004 · 35 · 336310.1007/s11661-004-0173-x ↗
34. Senuma · Mater. Trans. · 2006 · 47 · 176910.2320/matertrans.47.1769 ↗