journal article·2012-10

The effect of 3mol% Y2O3 stabilized ZrO2 produced by a steric entrapment method on the mechanical and sintering properties of Cr3C2 based cermets

Ali Özer, Waltraud M. Kriven, Yahya Kemal Tür

Publisher page

Abstract

Abstract The aim of the study was to increase the toughness and strength of the Cr3C2 based cermets without compromising other mechanical properties by reinforcing Cr3C2–NiCr with yttria stabilized tetragonal zirconia particles (3Y-TZP). The TZPs were produced by a steric entrapment process. Cr3C2–NiCr (master) and 2 wt% 3Y-TZP reinforced Cr3C2–NiCr “73C2Z3” cermets were sintered and the sintering kinetics and resulting mechanical properties were determined. The master cermets were sintered to 97% of theoretical density at 1350 °C while 73C2Z3 cermets achieved a relative density of 98.5% even at 1300 °C. Elastic modulus, transverse rapture strength, hardness, and fracture toughness values were measured. For the master cermets, all mechanical properties showed an increasing trend by increasing the sintering temperature to 1350 °C. On the other hand, the mechanical properties of 73C2Z3 cermets reached maximum or near maximum values at 1300 °C. Moreover, 73C2Z3 cermets had higher strength and fracture toughness compared to that of the master cermets and this observation was attributed to smaller carbide grains, a homogeneous 3-D network structure of Ni–Cr metal binder phase and a good distribution of fine 3Y-TZPs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Romero · Surf. Coat. Technol. · 2003 · 163–164 · 39210.1016/S0257-8972(02)00634-5 ↗
2. Hussainova · Tribol. Int. · 2012 · 46 · 25410.1016/j.triboint.2011.06.004 ↗
3. Kriven · J. Am. Ceram. Soc. · 1988 · 71 · 102110.1111/j.1151-2916.1988.tb05786.x ↗
4. Kriven · Am. Ceram. Soc. Bull. · 1980 · 59
5. Antonov · Tribol. Int. · 2012 · 46 · 26110.1016/j.triboint.2011.06.029 ↗
6. M. Antonov, I. Hussainova, J. Pirso, Proceedings of the Fourth International Conference of DAAAM National Estonia, (2004), pp. 177–180.
7. Sidhu · J. Therm. Spray Technol. · 2006 · 15 · 81110.1361/105996306X147162 ↗
8. Wan · Int. J. Refract. Met. Hard Mater. · 2012 · 31 · 17910.1016/j.ijrmhm.2011.10.013 ↗
9. Chatha · Surf. Coat. Technol. · 2012 · 206 · 383910.1016/j.surfcoat.2012.01.060 ↗
10. Kayuk · Powder Metall. Met. Ceram. · 2003 · 42 · 25710.1023/A:1023990931958 ↗
11. Magnani · J. Therm. Spray Technol. · 2009 · 18 · 35310.1007/s11666-009-9305-6 ↗
12. Preiss · J. Eur. Ceram. Soc. · 1999 · 19 · 18710.1016/S0955-2219(98)00191-5 ↗
13. M. Viljus, S. Letunovits, R. Traksmaa, J. Pirso, Proceedings of the Third International Conference Industrial Engineering—New Challenges to SME, (2002), pp. 220–223.
14. Juhani · Int. J. Mater. Prod. Technol. · 2011 · 40 · 7510.1504/IJMPT.2011.037207 ↗
15. Dercz · J. Mater. Process. Technol. · 2005 · 162–163 · 1510.1016/j.jmatprotec.2005.02.004 ↗
16. Fernandes · Ceram. Int. · 2009 · 35 · 36910.1016/j.ceramint.2007.11.001 ↗
17. Huang · J. Alloys Compd. · 2008 · 464 · 20510.1016/j.jallcom.2007.10.038 ↗
18. Butz · Solid State Ionics · 2012 · 214 · 3710.1016/j.ssi.2012.02.023 ↗
19. Heuer · J. Am. Ceram. Soc. · 1982 · 65 · 64210.1111/j.1151-2916.1982.tb09946.x ↗
20. Hussainova · Adv. Mater. Res. · 2011 · 214 · 34410.4028/www.scientific.net/AMR.214.344 ↗
21. Hussainova · Wear · 2011 · 271 · 190910.1016/j.wear.2010.11.034 ↗
22. Nguyen · J. Mater. Res. · 1999 · 14 · 341710.1557/JMR.1999.0462 ↗
23. Gulgun · J. Am. Ceram. Soc. · 1999 · 82 · 55610.1111/j.1151-2916.1999.tb01800.x ↗
24. W.M. Kriven, B.R. Rosczyk, M.I. Bertoni, T.O. Mason, 27th International Cocoa Beach Conference on Advanced Ceramics and Composites: A, 24 (2003), pp. 287–292.
25. Lee · J. Am. Ceram. Soc. · 1999 · 82 · 204910.1111/j.1151-2916.1999.tb02039.x ↗
26. S.J. Lee, W.M. Kriven, 22nd Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B, 19 (1998), pp. 469–476.
27. Mecholsky · J. Adv. Mater. · 1993 · 5 · 22410.1002/adma.19930050320 ↗
28. Duran · J. Mater. Process. Technol. · 1998 · 74 · 6910.1016/S0924-0136(97)00251-3 ↗
29. Viljus · Int J. Mater. Prod. Technol. · 2007 · 28 · 46810.1504/IJMPT.2007.013090 ↗
30. Hussainova · Wear · 2007 · 263 · 90510.1016/j.wear.2006.12.027 ↗
31. Chandradass · J. Exp. Nanosci. · 2010 · 6 · 3810.1080/17458081003762813 ↗