journal article·2007-02

Some analysis on stress and strain limit for necking and fracture during forming of some HSLA steel sheets

R. Narayanasamy, C. Sathiya Narayanan, N.L. Parthasarathi

Publisher page

Abstract

Abstract This paper deals with the development of stress based forming limit diagram and fracture limit diagram from the experimentally determined strain values for different stress or strain ratios for three HSLA steel sheets, namely HSLA steel sheet with 1.6 mm thickness, microalloyed steel sheet of 1.2 mm thickness and carbon–manganese steel sheet of 1.4 mm thickness. Here, the forming and fracture behaviour of the above steels have been related with the mechanical properties and microstructure of steels. It is observed that carbon–manganese steel shows better formability in tension–tension and plane strain regions. The carbon–manganese steel, which exhibits high normal anisotropy and pancake type of microstructure, is highly found suitable for drawing operation. A good correlation between the void size and the strain ratios derived from Mohr's circle to the mean strain, namely (γ12/ɛm, γ23/ɛm and γ13/ɛm) have been found from the present investigation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Brunet · J. Mater. Process. Technol. · 2001 · 112 · 21410.1016/S0924-0136(01)00578-7 ↗
2. Savoie · Mater. Sci. Eng. A · 1998 · 257 · 12810.1016/S0921-5093(98)00830-2 ↗
3. Keeler · Sheet Met. Ind. · 1965 · 42 · 683
4. Goodwin · Metall. Ital. · 1968 · 60 · 764
5. Hecker · Sheet Met. Ind. · 1975 · 53 · 671
6. Butuc · J. Mater. Process. Technol. · 2003 · 142 · 71410.1016/S0924-0136(03)00813-6 ↗
7. Avila · J. Mater. Process. Technol. · 2003 · 141 · 10110.1016/S0924-0136(03)00162-6 ↗
8. C.L. Chow, M. Jie, Int. J. Mech. Sci. (2006) in press.
9. Narayanasamy · Indian J. Eng. Mater. Sci. · 2005 · 12 · 141
10. Narayanasamy · Mater. Sci. Eng. A · 2006 · 417 · 19710.1016/j.msea.2005.10.052 ↗
11. Graf · Met. Trans. A · 1992 · 24 · 249710.1007/BF02646528 ↗
12. Kleemola · Sheet Met. Ind. · 1977 · 63 · 559
13. Arrieux · 1982 · 61
14. Stoughton · Int. J. Mech. Sci. · 2000 · 42 · 110.1016/S0020-7403(98)00113-1 ↗
15. Stoughton · J. Eng. Mater. Technol. · 2001 · 12310.1115/1.1398083 ↗
16. T.B. Stoughton, SAE Paper 2002-01-0157, 2002.
17. R. Narayanasamy, Sathiyanarayanan, Report of FLD on IF Steels, TISCO, National Institute of Technology, Tiruchirappalli 620015, Tamilnadu, India, 2005.
18. R. Narayanasamy, Drawability of sheet metals when drawn through conical and tractix dies, Ph.D. Thesis, National Institute of Technology, Tiruchirappalli 620015, Tamilnadu, India, 1992.