journal article·2008-06

On the elevated-temperature deformation behavior of polycrystalline Cu subjected to predeformation by multiple compression

Y.J. Li, X.H. Zeng, W. Blum

Publisher page

Abstract

Abstract Strain rate sensitivity of flow stress and creep resistance were studied during creep at elevated temperature of 373 K as function of prestrain in multiple uniaxial compression at room temperature for pure Cu99.99 with initial grain size d ≈ 50 μ m. Moderate prestrains ≤ 2 strengthen the material by formation of subgrains with low-angle boundaries, while severe prestrains enhance the strain rate sensitivity and soften the material in the saturation state of deformation. The results are discussed in terms of increase of the fraction of high-angle boundaries in the subgrain structure produced by severe prestraining influencing the balance of generation and annihilation of dislocations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Valiev · J. Mater. Res. · 2002 · 17 · 510.1557/JMR.2002.0002 ↗
2. Weertman · Mater. Sci. Eng. A · 1993 · 166 · 16110.1016/0921-5093(93)90319-A ↗
3. Blum · Phys. Status Solidi (a) · 2004 · 201 · 291510.1002/pssa.200406878 ↗
4. Li · Mater. Sci. Eng. A · 2005 · 410–411 · 45110.1016/j.msea.2005.08.107 ↗
5. Wang · Acta Mater. · 2004 · 52 · 169910.1016/j.actamat.2003.12.022 ↗
6. Li · Acta Mater. · 2004 · 52 · 500910.1016/j.actamat.2004.07.003 ↗
7. Li · Mater. Sci. Eng. A · 2004 · 387–389 · 58510.1016/j.msea.2003.11.086 ↗
8. Dalla Torre · Scripta Mater. · 2004 · 51 · 36710.1016/j.scriptamat.2004.05.021 ↗
9. Höppel · Z. Metallkd. · 2005 · 96 · 56610.3139/146.101071 ↗
10. Meyers · Prog. Mater. Sci. · 2006 · 51 · 42710.1016/j.pmatsci.2005.08.003 ↗
11. Dalla Torre · Acta Mater. · 2004 · 52 · 481910.1016/j.actamat.2004.06.040 ↗
12. Molodova · Mater. Sci. Forum · 2006 · 503–504 · 46910.4028/www.scientific.net/MSF.503-504.469 ↗
13. Zehetbauer · Acta Metall. Mater. · 1993 · 41 · 57710.1016/0956-7151(93)90088-A ↗
14. Wang · Mater. Sci. Eng. A · 2004 · 375–377 · 4610.1016/j.msea.2003.10.214 ↗
15. Li · Phys. Status Solidi (a) · 2005 · 202 · R11910.1002/pssa.200521160 ↗
16. Y.J. Li, PhD Thesis, University of Erlangen-Nürnberg, Cuvillier Verlag, Göttingen, 2006.
17. Sklenička · Mater. Sci. Eng. A · 2005 · 410–411 · 40810.1016/j.msea.2005.08.099 ↗
18. W. Blum, Y.J. Li, in: R.S. Mishra, J.C. Earthman, S.V. Raj, R. Viswanathan (Eds.), Creep Deformation and Fracture, Design, and Life Extension, Symposium at MST’05 Fall Meeting, 2005, pp. 65–74.
19. Straub · Acta Mater. · 1996 · 44 · 433710.1016/1359-6454(96)00104-8 ↗
20. W. Blum, in: H. Mughrabi (Ed.), Volume 6 of Materials Science and Technology, VCH Verlagsgesellschaft, Weinheim, 1993, pp. 359–405.
21. Zeng · Mater. Sci. Eng. A · 2008 · 483–484 · 9510.1016/j.msea.2006.09.130 ↗