journal article·2010-03

Microstructural effects on crack path selection in bending and fatigue in a Nb–19Si–5Cr–3.5Hf–24Ti–0.75Sn–1W alloy

Yi Liu, Mostafa Shazly, John J. Lewandowski

Publisher page

Abstract

Abstract Nb–Si alloy containing 19Si, 5Cr, 3.5Hf, 24Ti, 0.75Sn and 1W (in at.%) has been tested by three-point bending and fatigue at both room temperature and 400 °C. The microstructure and fracture surface associated with crack growth were investigated by scanning electron microscopy (SEM) and electron backscattering diffraction (EBSD). The alloy contains Nb solid solution (Nb(ss)) and Nb- or Ti-rich silicides. Some pre-existing microcracks were found in the silicides. EBSD Analyses on the cast and HIPped Nb–Si alloy revealed a preferred orientation in the Nb(ss) similar to that of a unidirectionally solidified alloy. The fatigue crack path preferentially propagated either along the phase boundaries between the silicide and Nb(ss) or through the pre-existing silicide microcracks. Slip steps were observed inside the Nb(ss) during crack propagation, indicating deformation in the alloy occurred in the Nb(ss) while the silicides assisted the crack propagation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Bewlay · MRS Bulletin · 2003 · 28 · 64610.1557/mrs2003.192 ↗
2. Bewlay · Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science · 2003 · 34A · 204310.1007/s11661-003-0269-8 ↗
3. Zinsser · Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science · 1998 · 29 · 174910.1007/s11661-998-0098-x ↗
4. Zinsser · Scripta Materialia · 1998 · 12 · 177510.1016/S1359-6462(98)00106-7 ↗
5. Sekido · Journal of Alloys and Compounds · 2006 · 425 · 22310.1016/j.jallcom.2006.01.071 ↗
6. Mendiratta · Metallurgical Transactions A · 1990 · 22A · 157310.1007/BF02667370 ↗
7. Lewandowski · 2001
8. Kimura · Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science · 2005 · 36A · 48310.1007/s11661-005-0161-9 ↗
9. Kim · Intermetallics · 2001 · 9 · 52110.1016/S0966-9795(01)00034-6 ↗
10. Kajuch · Acta Metallurgica Et Materialia · 1995 · 43 · 195510.1016/0956-7151(94)00391-T ↗
11. Rigney · Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science · 1996 · 27 · 329210.1007/BF02663879 ↗
12. Bewlay · Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science · 1996 · 27 · 380110.1007/BF02595629 ↗
13. Subramanian · Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing · 1997 · 240 · 110.1016/S0921-5093(97)00555-8 ↗
14. Sekido · Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing · 2007 · 444 · 5110.1016/j.msea.2006.06.140 ↗
15. Johnson · Materials Research and Standards · 1965 · 5 · 442
16. 2004
17. Kajuch · Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing · 1992 · 155 · 5910.1016/0921-5093(92)90312-O ↗
18. Herman · 2009
19. Mendiratta · Scripta Metallurgica Et Materialia · 1991 · 25 · 23710.1016/0956-716X(91)90387-G ↗
20. Drawin · Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science · 2005 · 36A · 49710.1007/s11661-005-0163-7 ↗