journal article·2014-01

The static and dynamic mechanical properties of a new low-carbon, low-alloy austempered steel

Codrick J. Martis, Susil K. Putatunda, James Boileau, John G. Spray

Publisher page

Abstract

Abstract In recent years, there has been significant interest in the development of high silicon bainitic steels. This has been due to their excellent mechanical properties, including very high strength, good ductility, high fracture toughness, and high wear resistance. Recently, a high-strength, high-toughness bainitic steel with a high silicon content has been developed by two of the authors. In this paper, the mechanical properties as a function of austempering are presented. A low-carbon, low-alloy (LCLA) bainitic steel with a high (2%) silicon content was quenched and isothermally austempered at temperatures from 260 °C to 343 °C for 2 h. The heat treatment produced a microstructure consisting of tempered martensite with austenite located between the martensite laths. The mechanical properties of these austempered samples, including plane-strain fracture toughness, were characterized and compared with as-cast samples. All of the austempering treatments produced high strength (>1500 MPa UTS) and high fracture toughness (>105 MPa) with reasonable ductility (>4%). A promising potential application of this steel is a military vehicle armor plate; therefore, a small number of impact tests were performed to qualitatively assess the improvement in resistance. Impact testing was performed using projectiles propelled by a light gas gun; targets of mild steel and LCLA austempered at 316 °C were evaluated. Qualitative results reveal that, in comparison to the mild steel sample, the austempered LCLA samples suffered reduced damage and no penetration.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. De Moor · AIST Transactions, Iron and Steel Technology · 2010 · 7 · 133
2. Matlock · Journal of Engineering Science and Technology · 2012 · 15 · 1
3. Edmonds · Materials Science and Engineering · 2006 · 438–440 · 2510.1016/j.msea.2006.02.133 ↗
4. De Moor · ISIJ International · 2011 · 51 · 13710.2355/isijinternational.51.137 ↗
5. Santofimia · Acta Materialia · 2011 · 59 · 605910.1016/j.actamat.2011.06.014 ↗
6. Caballero · Current Opinion in Solid State and Materials Science · 2004 · 8 · 25110.1016/j.cossms.2004.09.005 ↗
7. García-Mateo · Journal de Physique IV · 2003 · 112 · 28510.1051/jp4:2003884 ↗
8. García-Mateo · ISIJ International · 2003 · 43 · 123810.2355/isijinternational.43.1238 ↗
9. Grajcar · Archives of Civil Engineering and Mechanical Engineering · 2012 · 12 · 33410.1016/j.acme.2012.06.011 ↗
10. Aydin · Materials Science and Engineering A · 2013 · 564 · 50110.1016/j.msea.2012.11.113 ↗
11. Delincé · Acta Materialia · 2007 · 55 · 233710.1016/j.actamat.2006.11.029 ↗
12. Mukherjee · Metallurgical Transactions A · 2009 · 40A · 214510.1007/s11661-009-9899-9 ↗
13. Putatunda · Materials Science and Engineering A · 2009 · 513–514 · 32910.1016/j.msea.2009.02.013 ↗
14. Putatunda · Materials Science and Engineering A · 2011 · 528 · 505310.1016/j.msea.2011.03.038 ↗
15. Putatunda · Materials Science Forum · 2012 · 706–709 · 225910.4028/www.scientific.net/MSF.706-709.2259 ↗
16. Martis · Materials and Design · 2013 · 46 · 16810.1016/j.matdes.2012.10.017 ↗
17. Kuziak · Archives of Civil and Mechanical Engineering · 2008 · 8 · 10310.1016/S1644-9665(12)60197-6 ↗
18. Cullity · 2001
19. ASTM E8/E8M-11: Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, PA, 2003, http://doi: 10.1520/E0008_E0008M-11, 〈http://www.astm.org〉.10.1520/E0008_E0008M-11 ↗
20. ASTM E399-12: Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials, ASTM International, West Conshohocken, PA, 2003, doi: 10.1520/E0399-12, 〈www.astm.org〉.10.1520/E0399-12 ↗
21. AEP-55, Procedures for Evaluating the Protection Levels of Logistic and Light Armoured Vehicles for KE and Artillery Threats, vol. 1, (1st edition), Feburary 2005.
22. Speer · Acta Materialia · 2003 · 51 · 261110.1016/S1359-6454(03)00059-4 ↗
23. Badheshia · Materials Science · 1983 · 17 · 411
24. Mishraa · International Journal of Impact Engineering · 2012 · 44 · 1710.1016/j.ijimpeng.2011.12.004 ↗