Experimental investigation and numerical description of the damage evolution in a duplex stainless steel subjected to VHCF-loading
Source abstract
Abstract
Abstract The present study documents how the irreversible fraction of cyclic plastic strain, induced by loading amplitudes close to the durability limit, causes fatigue damage such as (i) slip band development, (ii) fatigue crack initiation and (iii) short fatigue crack propagation. The damage evolution of the austenitic–ferritic duplex stainless steel X2CrNiMoN22-5-3 (318 LN) was investigated up to one billion load cycles by means of high resolution electron microscopy (HR-SEM, TEM), focused ion beam (FIB) cutting, confocal laser scanning microscopy (CLSM), in-situ far field microscopy and high-energy (87.1 keV) X-ray diffraction (XRD) experiments. The experimentally identified damage mechanisms were implemented into three-dimensional finite element simulations, which consider crystal plasticity. These simulations enable fatigue life predictions of real microstructures obtained for instance by means of, e.g. automated electron back scatter diffraction (EBSD) analysis. The simulations allow for determining whether microcracks (i) initiate in a microstructure, (ii) arrest in the midst of the first grain, (iii) are permanently, (iv) temporary or (v) not at all blocked by grain or phase boundaries. Moreover, this concept is capable to contribute to the concept of tailored microstructures for improved cyclic-loading behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Review and prospects for current studies on very high cycle fatigue of metallic materials for machine structural use10.1299/jmmp.3.425 ↗
2. Effects of defects, inclusions and inhomogeneities on fatigue strength10.1016/0142-1123(94)90001-9 ↗
3. Crack initiation and short crack growth in metastable austenitic stainless steel in the high cycle fatigue regime10.1016/j.proeng.2010.03.102 ↗
4. The significance of microstructural barriers during fatigue of a duplex steel in the high-and very-high-cycle-fatigue (HCF/VHCF) regime10.1016/j.ijfatigue.2009.09.010 ↗
5. A dislocation model for fatigue crack initiation10.1115/1.3157599 ↗
6. A dislocation model for the two critical stress intensities required for threshold fatigue crack propagation10.1016/1359-6462(96)00301-6 ↗
7. The deformation and ageing of mild steel: III discussion of results
8. The cleavage strength of polycrystals
9. Experimental characterization and two-dimensional simulation of short-crack propagation in an austenitic–ferritic duplex steel10.1016/j.ijfatigue.2005.07.048 ↗
10. Analysis of VHCF damage in a duplex stainless steel using hard X-ray diffraction techniques10.1016/j.ijfatigue.2014.04.001 ↗
11. Fatigue of copper single crystals in vacuum and in air I: persistent slip bands and dislocation microstructures10.1016/0025-5416(84)90084-3 ↗
12. Fatigue of copper single crystals in vacuum and in air II: fatigue crack propagation10.1016/0025-5416(84)90085-5 ↗
13. The effect of vacuum on fatigue crack growth10.1016/0142-1123(82)90064-0 ↗
14. A microstructure-based fatigue-crack-initiation model10.1007/s11661-003-0207-9 ↗
15. A model of extrusions and intrusions in fatigued metals I. Point-defect production and the growth of extrusions10.1080/01418618108239541 ↗
16. On the role of point defects in fatigue crack initiation10.1016/0025-5416(87)90157-1 ↗
17. A crystallographic mechanism for fatigue crack propagation through grain boundaries10.1016/S1359-6454(00)00214-7 ↗
18. Fingerland · Acta Crystallogr. A · 1971 · 27 · 28010.1107/S0567739471000639 ↗
19. Y. Huang, A User-Material Subroutine Incorporating Single Crystal Plasticity in the Abaqus Finite Element Program, Harvard University, Dipvision of Applied Sciences, 1991.
20. Modelling of small fatigue crack growth interacting with grain boundary10.1016/0013-7944(86)90266-3 ↗
21. Study of the interaction of a short fatigue crack with grain boundaries in a cast Al alloy using X-ray microtomography10.1016/S1359-6454(02)00320-8 ↗