journal article·2022-04

Constitutive modeling and finite element analysis of metastable medium entropy alloy

Jihye Kwon, Jungwan Lee, Hyoung Seop Kim

Publisher page

Abstract

© 2022 Elsevier B.V.In this study, the constitutive model of metastable ferrous Fe60Co15Ni15Cr10 (at%) medium entropy alloy (FeMEA) was constructed based on deformation-induced martensitic transformation (DIMT) behavior under cryogenic temperature. The crystal structure of the FeMEA gradually transformed from a single face-centered cubic (FCC) phase to a body-centered cubic (BCC) phase during deformation. The critical initiation stress criterion and the volumetric fraction evolution model were employed to describe the DIMT kinetics during uniaxial tensile testing. The flow stress model of the FCC phase as a function of the applied strain was developed using the dislocation-based hardening model, and the BCC phase behavior was evaluated based on the macroscopic behavior of the multiphase material and phase transformation kinetics. The decline in the dislocation mean free path for the FCC phase was associated with the grain refinement of the FCC phase due to the transformed BCC islands. To verify its applicability, the model was compared to the experimental data describing phase transformation kinetics and the mechanical behavior. ; 1 ; 1 ; N ; scie ; scopus
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High Temperature Alloys and Creep · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Nanostructured high‐entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
3. Lightweight, refractory high-entropy alloy, CrNbTa0.25TiZr, with high yield strength
4. Exceptional phase-transformation strengthening of ferrous medium-entropy alloys at cryogenic temperatures10.1016/j.actamat.2018.09.057 ↗
5. Towards ferrous medium-entropy alloys with low-cost and high-performance10.1016/j.scriptamat.2020.05.030 ↗
6. On the phase transformation and dynamic stress–strain partitioning of ferrous medium-entropy alloy using experimentation and finite element method10.1016/j.mtla.2020.100619 ↗
7. The role of transformation‐induced plasticity in the development of advanced high strength steels10.1002/adem.201701083 ↗
8. Metastable austenite driven work-hardening behaviour in a TRIP-assisted dual phase steel10.1016/j.ijplas.2016.10.005 ↗
9. High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development—properties—application10.1016/S0749-6419(00)00015-2 ↗
10. Influence of microstructure constituents on the hydrogen‐induced mechanical degradation in ultra‐high strength sheet steels10.1007/s12540-021-00968-x ↗
11. Strain-hardening behaviors of TRIP-assisted steels during plastic deformation10.1016/j.msea.2007.06.054 ↗
12. Martensite phase stress and the strengthening mechanism in TRIP steel by neutron diffraction10.1038/s41598-017-15252-5 ↗
13. Stress relaxation and its effect on tensile deformation of steels10.1016/j.matdes.2013.05.088 ↗
14. On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels10.1007/s11661-001-1027-4 ↗
15. Micromechanical finite element analysis of strain partitioning in multiphase medium manganese TWIP+ TRIP steel10.1016/j.actamat.2016.02.001 ↗
16. Modeling the work hardening behavior in metastable high entropy alloys10.1016/j.msea.2021.141778 ↗
17. Macro modelling and homogenization for transformation induced plasticity of a low-alloy steel10.1016/j.ijplas.2008.03.005 ↗
18. Interstitial effects on the incipient plasticity and dislocation behavior of a metastable high-entropy alloy: nanoindentation experiments and statistical modeling10.1016/j.actamat.2021.116633 ↗
19. Effects of transformation-induced plasticity (TRIP) on tensile property improvement of Fe45Co30Cr10V10Ni5-xMnx high-entropy alloys10.1016/j.msea.2019.138809 ↗
20. TWIP and TRIP-associated mechanical behaviors of Fex (CoCrMnNi)100-x medium-entropy ferrous alloys10.1016/j.msea.2019.138896 ↗
21. Precipitation-driven metastability engineering of carbon-doped CoCrFeNiMo medium-entropy alloys at cryogenic temperature10.1016/j.scriptamat.2020.07.023 ↗
22. Analysis of elements non-uniform distribution of FeCoCrNi high-entropy alloy coatings on Ti–6Al–4V surface by laser cladding10.1007/s12540-020-00900-9 ↗
23. Deformation behavior of a Co-Cr-Fe-Ni-Mo medium-entropy alloy at extremely low temperatures10.1016/j.mattod.2021.08.001 ↗
24. Temperature-and strain-dependent thermally-activated deformation mechanism of a ferrous medium-entropy alloy10.1016/j.intermet.2021.107202 ↗
25. Nano-scale heterogeneity-driven metastability engineering in ferrous medium-entropy alloy induced by additive manufacturing
26. Kinetics of strain-induced martensitic nucleation10.1007/BF02672301 ↗
27. The influence of alloying, temperature, and related effects on the stacking fault energy10.1007/BF03038370 ↗
28. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
29. Microstructure-based constitutive modeling of TRIP steel: prediction of ductility and failure modes under different loading conditions10.1016/j.actamat.2009.02.020 ↗
30. Chromium depletion and martensite formation at grain boundaries in sensitised austenitic stainless steel10.1016/0001-6160(86)90091-X ↗
31. A unified phenomenological description of work hardening and creep based on one-parameter models10.1016/0001-6160(84)90202-5 ↗
32. Critical grain size for dislocation storage and consequences for strain hardening of nanocrystalline materials10.1016/j.scriptamat.2010.05.006 ↗
33. Role of effective strain during cold rolling deformation on mechanical characteristics of AISI 304 steel10.1007/s12540-020-00722-9 ↗
34. Tensile behavior of intercritically annealed 10 pct Mn multi-phase steel10.1007/s11661-013-2047-6 ↗
35. Mechanical behaviour of multiphase materials: an intermediate mixture law without fitting parameter
36. Transformation behavior of TRIP steels10.1007/BF02659928 ↗
37. In situ neutron diffraction study of phase stress evolution in a ferrous medium-entropy alloy under low-temperature tensile loading10.1016/j.scriptamat.2019.02.027 ↗
38. Observation austenite memory and significant enhancement of tensile properties during cyclic reverse martensite transformation in a Fe-Ni-C TRIP steel10.1016/j.msea.2016.09.003 ↗
39. Reverse transformation mechanism of martensite to austenite in a metastable austenitic alloy10.1016/j.msea.2009.02.010 ↗
40. Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
41. Deformation mechanisms in austenitic TRIP/TWIP steel as a function of temperature10.1007/s11661-014-2684-4 ↗
42. Secondary austenite formation during aging of hot-rolled plate of a TRIP-aided Mo-free lean duplex stainless steel10.1007/s12540-020-00689-7 ↗
43. An overview of tailoring strain delocalization for strength-ductility synergy10.1016/j.pmatsci.2020.100675 ↗