journal article·2022-01

Specimen size effect on evaluation of strength properties of 3Cr1MoV and Incoloy 800H using small punch test

Wulin Wang, Tong Xu, Jiru Zhong, Kaishu Guan, Yantao Shang, Xiaocheng Zhang

Publisher page

Abstract

Abstract Standardization of small punch test (SPT) is being carried out, but the specimen thickness is not unified in different laboratories and specimen size effect on deformation mechanism still remains unclear. In this paper, SPT specimens with thicknesses of 100 μm–500 μm were used to investigate specimen size effect on strength properties and fracture morphology of 3Cr1MoV and Incoloy 800H. The grain sizes of two materials were 10 μm (3Cr1MoV) and 50 μm (Incoloy 800H). Yield and ultimate tensile strengths were extracted from SPT data based on a combined-scheme of finite element simulations and experiments. Fractography of specimens was studied using a scanning electron microscope. The results showed that the strength value of Incoloy 800H increased with the decrease of thickness, the size dependence of yield strengths was stronger than that of ultimate strengths, and the strength value of 3Cr1MoV was thickness independent. Fractographic investigations found that failure was caused by ductile fracture for all the specimens. A theoretical model considering geometrically necessary dislocations densities, available dislocation sources and grain sizes was proposed to explain the different mechanical responses of investigated materials to specimen thicknesses. This work clarifies the SPT specimen thickness and the grain size of studied materials should be taken into consideration before sampling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Evaluation of mechanical properties using shear–punch testing10.1016/j.msea.2004.12.048 ↗
2. Development of a methodology to study the hydrogen embrittlement of steels by means of the small punch test10.1016/j.msea.2014.12.083 ↗
3. Creep small-punch testing and its numerical simulations10.1016/j.msea.2008.06.053 ↗
4. Evaluation of the ductile-to-brittle transition temperature shift due to temper embrittlement and neutron irradiation by means of a small-punch test10.1016/0025-5416(86)90171-0 ↗
5. On the estimation of ultimate tensile stress from small punch testing10.1016/j.ijmecsci.2017.12.016 ↗
6. Recent developments in small punch testing: tensile properties and DBTT, Theor10.1016/j.tafmec.2016.09.012 ↗
7. Evaluation of fracture toughness by small-punch testing techniques using sharp notched specimens10.1016/S0308-0161(03)00042-5 ↗
8. Fracture toughness characterization through notched small punch test specimens10.1016/j.msea.2016.01.077 ↗
9. Effect of specimen size on small punch creep behavior of high nitrogen ferritic heat-resistant steels10.1016/j.msea.2018.02.030 ↗
10. Creep lifing methodologies applied to a single crystal superalloy by use of small scale testtechniques10.1016/j.msea.2015.03.119 ↗
11. Davies · 2018
12. Development of a novel methodology to study fatigue properties using the small punch test10.1016/j.msea.2019.01.074 ↗
13. Size effects on tensile strength of aluminum–bronze alloy at room temperature10.1016/j.matdes.2015.06.169 ↗
14. Size effects in tensile testing of thin cold rolled and annealed Cu foils10.1016/j.msea.2005.10.060 ↗
15. Size dependency of mechanical properties of high purity aluminium foils10.1016/j.msea.2009.08.016 ↗
16. A further step towards an understanding of size-dependent crystal plasticity: in situ tension experiments of miniaturized single-crystal copper samples10.1016/j.actamat.2007.10.015 ↗
17. Specimen size and grain size effects on tensile strength of Ag microwires10.1016/j.scriptamat.2010.12.031 ↗
18. 2009
19. On the correlation between minimum thickness and central deflection during small punch test10.1016/j.jnucmat.2016.03.012 ↗
20. Small punch tensile testing of curved specimens: finite element analysis and experiment10.1016/j.ijmecsci.2016.11.029 ↗
21. Toloczko · 2002 · 371
22. Estimation of yield and ultimate stress using the small punch test method applied to non-standard specimens: a computational study validated by experiments10.1016/j.ijmecsci.2017.11.040 ↗
23. Size effect criteria on the small punch test for AISI 316L austenitic stainless steel10.1016/j.msea.2014.03.098 ↗
24. Evaluation of the mechanical properties of SS-316L thin foils by small punch testing and finite element analysis10.1016/j.matdes.2015.05.049 ↗
25. Estimation of the mechanical properties of metallic materials by means of the small punch test10.1016/j.jallcom.2013.08.009 ↗
26. Development of a further-miniaturized specimen of 3 mm diameter for tem disk (ø 3 mm) small punch tests10.1016/0022-3115(87)90092-4 ↗
27. Small punch tests to estimate the mechanical properties of steels for steam power plant: I. Mechanical strength10.1016/S0308-0161(98)00074-X ↗
28. Small punch test method for metallic materials
29. An inverse finite element procedure for the determination of constitutive tensile behavior of materials using miniature specimen10.1016/j.commatsci.2004.01.039 ↗
30. A new method based on energy principle to predict uniaxial stress-strain relations of ductile materials by small punch testing10.1016/j.ijmecsci.2018.02.011 ↗
31. Assessment of mechanical properties of Incoloy800H by means of small punch test and inverse analysis10.1016/j.jallcom.2016.11.151 ↗
32. Application of small punch test to investigate mechanical behaviours and deformation characteristics of Incoloy800H10.1016/j.jallcom.2018.06.243 ↗
33. A procedure for predicting strength properties using small punch test and finite element simulation10.1016/j.ijmecsci.2019.01.006 ↗
34. Application of a database in the evaluation of strengths of Cr-Mo steels by means of small punch test10.1016/j.ijmecsci.2019.105195 ↗
35. The mechanical size effect as a mean-field breakdown phenomenon: example of microscale single crystal beam bending10.1016/j.actamat.2009.11.031 ↗
36. Size effects in miniaturized polycrystalline FCC samples: strengthening versus weakening
37. Strain gradient plasticity: theory and experiment10.1016/0956-7151(94)90502-9 ↗
38. A microbend test method for measuring the plasticity length scale10.1016/S1359-6454(98)00153-0 ↗
39. Review of small specimen test techniques for irradiation testing10.1007/BF02698242 ↗
40. Phenomenological studies of the effects of miniaturization and irradiation on the mechanical properties of stainless steels10.1080/00337578708224741 ↗
41. Indentation size effects in crystalline materials: a law for strain gradient plasticity10.1016/S0022-5096(97)00086-0 ↗
42. Mechanical properties of micro-sized copper bending beams machined by the focused ion beam technique10.1016/j.actamat.2005.05.036 ↗
43. A simple stochastic model for yielding in specimens with limited number of dislocations10.1016/j.actamat.2013.01.023 ↗
44. Plasticity size effects in free-standing submicron polycrystalline FCC films subjected to pure tension10.1016/j.jmps.2003.07.001 ↗