Strain ratio effects on microstructure discovery and low-cycle fatigue behavior of DP600 steel under cyclic shear path
Source abstract
Abstract
Abstract The fatigue behaviors of dual-phase steels (DP600) under cyclic shear path are studied and the effects of strain ratio are analyzed. Based on twin bridge shear specimens, complete reverse strain-controlled fatigue tests are carried out on DP600 sheet (1.2 mm) under different strain ratios (R = −1, −0.5, 0, and 0.5) with strain amplitudes in the range 0.8–3.0%. DP600 exhibits cyclic softening with a relatively constant softening rate related to amplitude and strain ratio. Smaller loading amplitude and higher strain ratio are beneficial to improve the softening ability of the material. The γ-fiber-type ( //ND) texture components are well developed at higher strain ratios, which improve the fluidity of the dual-phase steel, thus making the microstructure deformation more uniform and reducing the risk of damage caused by deformation compatibility. The uniform deformation of the material improves the absorption of plastic strain energy. Therefore, higher strain ratios are beneficial to improve the fatigue life of dual-phase steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Comparison of the work-hardening of metallic sheets using tensile and shear strain paths10.1016/j.ijplas.2008.07.002 ↗
2. Simple shear tests: experimental techniques and characterization of the plastic anisotropy of rolled sheets at large strains10.1016/j.jmatprotec.2005.09.003 ↗
3. Characterization of the strain-induced plastic anisotropy of rolled sheets by using sequences of simple shear and uniaxial tensile tests10.1016/j.jmatprotec.2005.04.086 ↗
4. A new shear test for sheet metal characterization10.1002/srin.201000163 ↗
5. Large strain flow curve identification for sheet metals under complex stress states10.1016/j.mechmat.2021.103997 ↗
6. A grooved in-plane torsion test for the investigation of shear fracture in sheet materials10.1016/j.ijsolstr.2015.03.032 ↗
7. Traphöner · 2015 · 17
8. Low-cycle multiaxial fatigue behaviour and fatigue life prediction for CuZn37 brass using the stress-strain models10.1016/j.ijfatigue.2017.04.011 ↗
9. Low cycle fatigue performance of DP600 steel under various pre-straining paths10.1016/j.ijfatigue.2019.105331 ↗
10. Effect of strain ratio on cyclic deformation behaviour of 7050-T6 aluminium alloy10.1016/j.ijfatigue.2019.105234 ↗
11. The effect of thickness variation and pre-strain on the cornering fatigue life prediction of a DP600 steel wheel disc10.1016/j.ijfatigue.2020.105799 ↗
12. Effect of martensite volume fraction on low cycle fatigue behaviour of dual phase steels: experimental and microstructural investigation10.1016/j.msea.2015.04.059 ↗
13. Influence of uniaxial and biaxial pre-straining on the low cycle fatigue performance of DP590 steel10.1016/j.ijfatigue.2021.106260 ↗
14. Comparison of multiaxial low cycle fatigue behavior of CP-Ti under strain-controlled mode at different multiaxial strain ratios10.1016/j.ijfatigue.2020.105818 ↗
15. Fatigue properties of ultra-fine grained dual phase ferrite/martensite low carbon steel10.1016/j.ijfatigue.2007.10.011 ↗
16. Investigation of small crack behaviour under cyclic loading in a dual phase steel with an FIB tomography technique10.1111/j.1460-2695.2007.01130.x ↗
17. A cyclic twin bridge shear test for the identification of kinematic hardening parameters10.1016/j.ijmecsci.2012.02.008 ↗
18. Cyclic plastic deformation and cyclic hardening/softening behavior in 304LN stainless steel10.1016/j.tafmec.2010.06.016 ↗
19. Unexpected cyclic stress-strain response of dual-phase high-entropy alloys induced by partial reversibility of deformation10.1016/j.scriptamat.2017.09.013 ↗
20. Ratcheting and low cycle fatigue behavior of SA333 steel and their life prediction10.1016/j.jnucmat.2010.03.014 ↗
21. A total strain energy density theory for cumulative fatigue damage10.1115/1.3265565 ↗
22. Effect of martensite volume fraction on stress triaxiality and deformation behavior of dual phase steel10.1016/j.matdes.2013.03.096 ↗
23. On the strength of grain and phase boundaries in ferritic-martensitic dual-phase steels10.3139/146.110519 ↗
24. Influence of pre-straining path on high cycle fatigue performance of DP 600 steel10.1016/j.ijfatigue.2019.05.017 ↗
25. Proportional and non-proportional hardening behavior of dual-phase steels10.1016/j.ijplas.2013.01.018 ↗
26. Micro-damage initiation in ferrite-martensite DP microstructures: a statistical characterization of crystallographic and chemical parameters10.1016/j.msea.2017.06.094 ↗
27. Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations10.1016/j.ijplas.2014.06.004 ↗
28. A two-step approach to predict shear band development with crystal plasticity finite element method (CPFEM)10.1016/j.ijsolstr.2016.06.003 ↗
29. Lattice rotation during severe local shear in a fully hardened Al–4%Cu–0.1%Fe single crystal alloy10.1016/j.scriptamat.2005.10.071 ↗
30. Occurrence of shear bands in rotated Goss ({110}⟨110⟩) orientations of metals with bcc crystal structure10.1016/j.scriptamat.2012.08.017 ↗
31. Recrystallization textures in cold-rolled Ti bearing IF steel sheets10.2355/isijinternational.42.1278 ↗
32. Mechanical, microstructural behaviour and modelling of dual phase steels under complex deformation paths10.1016/j.ijplas.2016.03.010 ↗
33. A micro mechanical study on failure initiation of dual phase steels under tension using single crystal plasticity model10.1016/j.ijplas.2010.12.001 ↗