Characterization of the recasting-affected zone in the nickel-based superalloy upon single-pulse laser treatment
Source abstract
Abstract
Abstract The wide application of various laser techniques is motivating research of microstructural evolution in laser manufactured materials and quantification of its mechanical performance. In the present work, the existence and performance of a recasting-affected zone (RAZ) between the melting-solidified material and the base material after single-pulse laser treatment were experimentally and computationally investigated. The RAZ strengthened by thermal plastification, twin formation and δ phase dissolution possesses a higher yield strength and can provide an effective strengthening mechanism for laser manufacturing components of the nickel-based superalloy, which was further verified in the analysis of the double aging-treated specimen. However, the micro-cracks nucleated during the laser manufacturing are distributed near the RAZ surface and can reduce the fracture strain and fatigue life of the component significantly. The high thermal gradients from the solidification were verified to be responsible for the plastic strengthening and micro-crack formation in RAZ.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Pulsed Nd:YAG laser beam drilling: A review10.1016/j.optlastec.2017.09.054 ↗
2. Nanoscale carbide precipitation in the recast layer of a percussion laser-drilled superalloy10.1016/j.scriptamat.2009.07.034 ↗
3. Fatigue behavior of Inconel 718 TIG welds10.1007/s11665-014-1028-2 ↗
4. The tensile deformation behavior of laser repaired Inconel 718 with a non-uniform microstructure10.1016/j.msea.2017.01.110 ↗
5. Microstructural evolution of laser-clad 75Cr3C2+25(80Ni20Cr) powder on Inconel 718 superalloy10.1016/j.jmatprotec.2020.116735 ↗
6. Enhancing damage-resistance in low carbon martensitic steels upon dual-pass laser treatment10.1016/j.scriptamat.2020.09.047 ↗
7. Rationalization of microstructure heterogeneity in INCONEL 718 builds made by the direct laser additive manufacturing process10.1007/s11661-014-2370-6 ↗
8. Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment10.1016/j.msea.2017.02.062 ↗
9. Understanding the microstructure and mechanical properties of Ti-6Al-4V and Inconel 718 alloys manufactured by Laser Engineered Net Shaping
10. δ Phase precipitation in Inconel 718 and associated mechanical properties10.1016/j.msea.2016.09.114 ↗
11. Texture control during laser deposition of nickel-based superalloy10.1016/j.scriptamat.2012.06.014 ↗
12. Effect of processing parameters on surface roughness, porosity and cracking of as-built IN738LC parts fabricated by laser powder bed fusion10.1016/j.jmatprotec.2020.116788 ↗
13. Microstructural characterization and fatigue performance of the recast material induced by laser manufacturing of a nickel-based superalloy10.1016/j.jmatprotec.2021.117087 ↗
14. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting10.1016/j.actamat.2011.12.032 ↗
15. Cyclic plasticity modeling and fatigue life assessment of the recasting material of a nickel-based superalloy induced by laser manufacturing10.1016/j.ijfatigue.2021.106154 ↗
16. Microstructure, fatigue behavior, and failure mechanisms of direct laser-deposited Inconel 71810.1007/s11837-016-2225-2 ↗
17. Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-based superalloy Inconel 71810.1016/j.msea.2019.05.007 ↗
18. A damage evolution model based on micro-structural characteristics for an additive manufactured superalloy under monotonic and cyclic loading conditions10.1016/j.ijfatigue.2019.105279 ↗
19. Effect of severe plastic deformation on grain boundary liquation of a nickel–base superalloy10.1016/j.scriptamat.2008.10.021 ↗
20. Investigation of recast and crack formation in laser trepanning drilling of CMSX-4 angled holes10.1007/s00170-017-1481-9 ↗
21. Electron microscopy study of direct laser deposited IN71810.1016/j.matchar.2015.06.017 ↗
22. 2012
23. Influence of microstructural heterogeneity and plastic strain on geometrically necessary dislocation structure evolution in single-phase and two-phase alloys
24. The role of geometrically necessary dislocations in giving material strengthening10.1016/S1359-6462(02)00338-X ↗
25. Optimum microstructure combination for maximizing tensile strength in a polycrystalline superalloy with a two-phase structure10.1016/j.actamat.2012.12.004 ↗
26. The effect of annealing twin-generated special grain boundaries on HAZ liquation cracking of nickel-base superalloys10.1016/S1359-6454(03)00090-9 ↗
27. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
28. The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 71810.1016/j.msea.2017.03.098 ↗
29. 2016
30. A review of mechanical properties of additively manufactured Inconel 718
31. Computational modeling of the forward and reverse problems in instrumented sharp indentation10.1016/S1359-6454(01)00295-6 ↗
32. A new method for estimating residual stresses by instrumented sharp indentation10.1016/S1359-6454(98)00226-2 ↗
33. Cyclic plasticity modeling of nickel-based superalloy Inconel 718 under multi-axial thermo-mechanical fatigue loading conditions10.1016/j.ijfatigue.2018.09.017 ↗
34. Life assessment of multiaxial thermomechanical fatigue of a nickel-based superalloy Inconel 71810.1016/j.ijfatigue.2018.11.018 ↗
35. Fracture energy and tensile strength depending on stress triaxiality along a running crack front in three-dimensional cohesive modeling10.1016/j.engfracmech.2020.106919 ↗
36. Special Metals Corporation. INCONEL Alloy 718. www.specialmetals.com.
37. 2003