journal article·2021-09

Homogeneous dispersion of graphene and interface metallurgical bonding in Sn–Ag–Cu alloy induced by ball milling

Yuan Li, Lianyong Xu, Hongyang Jing, Lei Zhao, Yongdian Han

Publisher page

Abstract

Abstract The addition of graphene is expected to improve the properties of solder and graphene reinforced Sn–Ag–Cu (GNSs/SAC) is considered to be able to adapt to harsh service environment. However, it is difficult to realize homogeneous dispersion of reinforcement and the metallurgical bonding between graphene and Sn–Ag–Cu alloys. In this study, composite solders with various dispersion of graphene have been prepared by different ball milling method. The microstructure characterization shows that incoherent interface and amorphous interface have been produced between graphene and Sn. The results of Energy Dispersive Spectrometer (EDS) and X-ray diffraction (XRD) indicate that the interstitial solid solution of carbon atoms in β-Sn is the cause of metallurgical bonding. The relative amount of the two types of interfaces and the dispersion of graphene were evaluated. The incoherent interface of composites tends to form at lower milling speed, and its thermal expansion response indicates that the interface has more effective load transfer, while the amorphous interface is opposite. Besides, the {101} fiber texture was also confirmed to be formed during ball milling and sintering. Finally, the nano indentation test verified the metallurgical bond, and the mechanical properties of the GNSs/SAC composites are determined by the interface type and graphene dispersion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Microstructure and joint properties of nano-silver paste by ultrasonic-assisted pressureless sintering10.1007/s11664-016-4394-8 ↗
2. On the initial stages of phase formation at the solid Cu/liquid Sn-based solder interface10.1016/j.actamat.2016.07.021 ↗
3. Annealing effect on residual stress of Sn-3.0Ag-0.5Cu solder measured by nanoindentation and constitutive experiments10.1016/j.msea.2017.04.066 ↗
4. Review on the effect of alloying element and nanoparticle additions on the properties of Sn-Ag-Cu solder alloys10.1108/SSMT-02-2014-0001 ↗
5. Dominant effect of high anisotropy in β-Sn grain on electromigration-induced failure mechanism in Sn-3.0Ag-0.5Cu interconnect10.1016/j.jallcom.2016.04.024 ↗
6. Research advances in nano-composite solders10.1016/j.microrel.2008.10.004 ↗
7. Measurement of the elastic properties and intrinsic strength of monolayer graphene10.1126/science.1157996 ↗
8. Thermal properties of graphene and nanostructured carbon materials10.1038/nmat3064 ↗
9. Potential and challenges of metal-matrix-composites reinforced with carbon nanofibers and carbon nanotubes10.1016/j.compscitech.2010.09.003 ↗
10. Direct measurement of the magnitude of the van der Waals interaction of single and multilayer graphene10.1021/acs.langmuir.8b02802 ↗
11. Solution properties of single-walled carbon nanotubes10.1126/science.282.5386.95 ↗
12. Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets10.1016/j.mser.2013.08.001 ↗
13. Achieving high strength and ductility in graphene/magnesium composite via an in-situ reaction wetting process10.1016/j.carbon.2018.08.009 ↗
14. A micromechanical model of graphene-reinforced metal matrix nanocomposites with consideration of graphene orientations10.1016/j.compscitech.2017.09.010 ↗
15. Effect of ball milling time on graphene nanosheets reinforced Al6063 composite fabricated by pressure infiltration method10.1016/j.carbon.2018.09.041 ↗
16. Length effect of carbon nanotubes on the strengthening mechanisms in metal matrix composites10.1016/j.actamat.2017.08.048 ↗
17. Strengthening behavior of few-layered graphene/aluminum composites10.1016/j.carbon.2014.10.044 ↗
18. Effect of graphene nanosheets reinforcement on the performance of Sn-Ag-Cu lead-free solder10.1016/j.msea.2012.10.079 ↗
19. Design and performance of Ag nanoparticle-modified graphene/SnAgCu lead-free solders10.1016/j.msea.2016.04.084 ↗
20. Study of mechanical properties of Ag nanoparticle-modified graphene/Sn-Ag-Cu solders by nanoindentation10.1016/j.msea.2019.138051 ↗
21. Effectively enhanced load transfer by interfacial reactions in multi-walled carbon nanotube reinforced Al matrix composites10.1016/j.actamat.2016.12.022 ↗
22. Magnetically-functionalized self-aligning graphene fillers for high-efficiency thermal management applications10.1016/j.matdes.2015.08.135 ↗
23. Effective load transfer by a chromium carbide nanostructure in a multi-walled carbon nanotube/copper matrix composite10.1088/0957-4484/23/31/315705 ↗
24. Properties and microstructure of nickel-coated graphite flakes/copper composites fabricated by spark plasma sintering10.1016/j.carbon.2017.05.082 ↗
25. Rapid soldering of flexible graphene assembled films at low temperature in air with ultrasonic assistance10.1016/j.carbon.2019.11.089 ↗
26. Dispersion and re-agglomeration of graphite nanoplates in polypropylene melts under controlled flow conditions10.1016/j.compositesa.2015.08.010 ↗
27. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
28. Indentation size effect on Ag nanoparticle-modified graphene/Sn-Ag-Cu Solders10.1007/s11664-017-5822-0 ↗
29. Microstructure-based modeling on structure-mechanical property relationships in carbon nanotube/aluminum composites10.1016/j.ijplas.2019.05.006 ↗
30. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
31. Nanomechanical characterization of Sn–Ag–Cu/Cu joints—Part 1: Young's modulus, hardness and deformation mechanisms as a function of temperature10.1016/j.actamat.2013.01.019 ↗
32. Direct observations of incipient plasticity during nanoindentation of Al10.1557/jmr.2004.19.1.176 ↗
33. Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: experiments and molecular dynamics simulations10.1016/j.actamat.2011.03.050 ↗
34. Mechanical behavior of phenolic-based composites reinforced with multi-walled carbon nanotubes10.1016/j.carbon.2005.07.005 ↗
35. Gas Barrier, Thermal mechanical and rheological properties of highly aligned graphene-LDPE nanocomposites10.3390/polym9070294 ↗
36. Slip, crystal orientation, and damage evolution during thermal cycling in high-strain wafer-level chip-scale packages10.1007/s11664-014-3572-9 ↗