journal article·2021-06Open access

High-strength superelastic as-cast Ni50.9Ti49.1-TiB2 in-situ composites

Yang Zhao, Fei Ming, Nan Jia, Jianhao Chen, Shubin Ren, Wei Xu, Xuanhui Qu

Abstract

Abstract In this study, as-cast Ni50.9Ti49.1−TiB2 in-situ composites were prepared by adding boron in the vacuum induction melting (VIM) process. With boron content of 1 at.%, TiB2 phases appear in the form of flakes at grain boundaries of the NiTi alloy matrix. These TiB2 flakes are two dimensional in geometry, featured with an ultrafine thickness less than 200 nm and two other dimensions up to ~20–60 μm. Increasing boron content to 2.4 at.% alters the morphology of TiB2 from discrete flakes to agglomerative clusters. This morphological dissimilarity has noticeable impact on resulting mechanical properties, superelasticity and shape memory effect. Overall, the NiTi-1at%B composite outperforms both the monolithic Ni50.9Ti49.1 alloy and the NiTi-2.4 at%B composite. More specifically, it exhibits complete superelasticity for pre-strains below 4% and up to 4.3% recoverable strain for 6% pre-strain, which is comparable to the pure as-cast Ni50.9Ti49.1 alloy. Meanwhile, the corresponding strength under 6% pre-strain reaches 1800 MPa, 20% higher than that of Ni50.9Ti49.1. In compression, the yield strength is 65% higher than that of pure Ni50.9Ti49.1. Moreover, a shape memory recovery ratio of 45.5%, slightly below 48.6% of the monolithic NiTi, was also achieved in NiTi-1at%B. This indicates that the addition of 1 at.% B can effectively improve the strength of NiTi while maintaining its superelasticity and shape memory effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. A study on the mechanical behavior and microstructural evolution of Ni60wt%-Ti40wt% (60Nitinol) intermetallic compound during hot deformation10.1016/j.matchemphys.2010.04.010 ↗
2. Shape memory and transformation behavior of high strength 60NiTi in compression10.1088/0964-1726/25/12/125031 ↗
3. Brief overview on nitinol as biomaterial
4. Physical metallurgy of Ti-Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
5. Otsuka · 1999
6. Effect of cold work and annealing on the structure and characteristics of NiTi alloy10.1016/j.msea.2009.04.057 ↗
7. Reconciling viability and cost-effective shape memory alloy options-A review of copper and iron based shape memory metallic systems
8. A new type of wear-resistant material: pseudo-elastic TiNi alloy10.1016/S0043-1648(98)00269-5 ↗
9. Fabrication of SLM NiTi shape memory alloy via repetitive laser scanning10.1007/s40830-017-0139-7 ↗
10. Guan · 2017
11. Powder-metallurgy preparation of NiTi shape-memory alloy using mechanical alloying and spark-plasma sintering10.17222/mit.2016.011 ↗
12. Microstructure and properties of in-situ synthesized NiTi-TiB2 composite
13. Composition and properties of in-situ NiTi-TiB2 composite
14. Effect of short-time annealing treatment on the superelastic behavior of cold drawn Ni-rich NiTi shape memory wires10.1016/j.jallcom.2012.11.183 ↗
15. Fan · 2009
16. Nanocomposite NiTi shape memory alloy with high strength and fatigue resistance10.1038/s41565-020-00837-5 ↗
17. Aging effects on hardness and dynamic compressive behavior of Ti-55Ni (at. %) alloy10.1016/j.msea.2009.10.069 ↗
18. Muhyuddin · 2018
19. Elementary martensitic transformation processes in Ni-rich NiTi single crystals with Ni4Ti3 precipitates10.1016/j.actamat.2006.03.036 ↗
20. High strength NiTiHf shape memory alloys with tailorable properties10.1016/j.actamat.2017.05.065 ↗
21. Effect of temperature and texture on the reorientation of martensite variants in NiTi shape memory alloys10.1016/j.actamat.2017.01.023 ↗
22. Electrolytic processing of NiTi shape memory alloys10.1016/j.msea.2003.11.080 ↗
23. Improved functional stability of a coarse-grained Ti-50.8 at.% Ni shape memory alloy achieved by precipitation on dislocation networks10.1016/j.scriptamat.2019.01.006 ↗
24. Formation mechanism of Ni2Ti4Ox in NiTi shape memory alloy10.1016/j.mtla.2018.100194 ↗
25. Effect of solution treatment and aging on microstructural evolution and mechanical behavior of NiTi shape memory alloy10.1016/S1003-6326(13)62914-3 ↗
26. Morphology evolution and growth mechanism of TiB2 in Ti-54Al-xB Alloys
27. Influence of Ni4Ti3 precipitate on pseudoelasticity of austenitic NiTi shape memory alloys deformed at high strain rate
28. On the effect of superimposed external stresses on the nucleation and growth of Ni4Ti3 particles: a parametric phase field study10.1016/j.actamat.2011.02.002 ↗
29. Degradation of the recoverable strain during stress controlled full transformation cycling in NiTi shape memory alloys10.1016/j.scriptamat.2018.10.031 ↗