journal article·2021-04

Fatigue crack initiation and propagation behavior of Inconel Alloy 690TT steam generator tube

Z.H. Li, X.Y. Wang, C. Hong, Y.H. Lu, T. Shoji

Publisher page

Abstract

Abstract Fatigue crack initiation and propagation behavior of Inconel Alloy 690TT steam generator (SG) tube under 0.2% strain amplitude were studied by scanning electron microscopy (SEM), electron back-scatter diffraction (EBSD) detector and extended finite element method (XFEM). The results showed that the main crack initiated at the discontinuous interface between the persistent slip bands (PSBs) and the matrix in the grain at the edge of the intrados surface. The metastable crack firstly transgranularly transited to the lateral surface, then penetrated steadily along the direction of maximum shear stress, and finally rapidly propagated perpendicularly to the loading axis, which was consistent with the numerical simulation results. Different fracture modes of specimen shape led to different fatigue lives. The fatigue life of tubular specimen was lower than that of bar specimen, the fatigue life of boat-shaped Alloy 690TT SG tube at 0.2% strain amplitude was 11,476 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Repassivation behavior of alloy 690TT in simulated primary water at different temperatures10.1016/j.jmst.2020.06.044 ↗
2. The corrosion behaviour of alloy 690 tube in simulated PWR secondary water with the effect of solid diffusing hydrogen10.1016/j.jnucmat.2019.02.019 ↗
3. Materials challenges in nuclear energy10.1016/j.actamat.2012.11.004 ↗
4. Effect of mono-tension and biaxial tension on microstructure and stress corrosion cracking of Alloy 690TT10.1016/j.msea.2009.04.065 ↗
5. An investigation of the fatigue crack growth behavior of INCONEL 69010.1016/j.msea.2005.09.101 ↗
6. Low cycle fatigue behavior of alloy 690 in simulated PWR water-Effects of dynamic strain aging and hydrogen10.1016/j.msea.2014.05.069 ↗
7. Corrosion fatigue behavior of Alloy 690 steam generator tube in borated and lithiated high temperature water10.1016/j.corsci.2014.08.027 ↗
8. Effects of normal load on fretting corrosion fatigue of Alloy 690 in 285 °C pure water10.1016/j.corsci.2018.07.010 ↗
9. Fatigue life prediction of steam generator tubes by tube specimens with circular holes10.3390/met9030322 ↗
10. Low cycle fatigue behavior of steam generator tubes under axial loading10.3390/ma11101944 ↗
11. Comparison of oxide layers formed on the low-cycle fatigue crack surfaces of Alloy 690 and 316 SS tested in a simulated PWR environment10.1016/j.net.2018.10.007 ↗
12. Effects of dissolved oxygen on corrosion fatigue cracking of Alloy 690(TT) in pressurized water reactor environments10.1016/j.ijfatigue.2014.12.007 ↗
13. Fatigue crack propagation in complex stress fields: experiments and numerical simulations using the Extended Finite Element Method (XFEM)10.1016/j.ijfatigue.2017.05.026 ↗
14. Modelling short crack propagation in a single crystal nickel-based superalloy using crystal plasticity and XFEM10.1016/j.ijfatigue.2020.105594 ↗
15. Development and application of a microstructure-based approach to characterize and model failure initiation in DP steels using XFEM10.1016/j.msea.2016.02.090 ↗
16. Investigating the effect of retained austenite and residual stress on rolling contact fatigue of carburized steel with XFEM and experimental approaches10.1016/j.msea.2018.06.078 ↗
17. Fatigue damage assessment of SUS316L using EBSD and PALS measurements10.1016/j.matchar.2019.05.038 ↗
18. EBSD analysis of cyclic load effect on final misorientation distribution of post-mortem low alloy steel: a new method for fatigue crack tip driving force prediction10.1016/j.ijfatigue.2018.04.016 ↗
19. In-situ observation on twin boundary evolution and crack initiation behavior during tensile test on 316L austenitic stainless steel10.1016/j.matchar.2017.08.020 ↗
20. The heterogeneity of persistent slip band nucleation and evolution in metals at the micrometer scale
21. Mechanisms of extrusion and intrusion formation in fatigued crystalline materials10.1016/j.msea.2013.12.005 ↗
22. The cyclic hardening and saturation behaviour of copper single crystals10.1016/0025-5416(78)90174-X ↗
23. High cycle fatigue behavior and numerical evaluation of Alloy 690TT steam generator tube10.1016/j.ijfatigue.2020.105662 ↗