Investigating the effect of grain structure on compressive response of open-cell metal foam using high-fidelity crystal-plasticity modeling
Source abstract
Abstract
Abstract The mechanical response of open-cell metallic foams depends strongly on their hierarchical structure, which ranges from the grain scale, to the scale of individual struts, to the scale of the bulk foam. The objective of this study is to investigate the effect of grain structure on the compressive mechanical response of open-cell metallic foam using a crystal-plasticity finite-element-based framework. Multiple polycrystalline instantiations (overlaid on a foam volume derived from X-ray tomography) are simulated to quantify the grain-size effect on crushing response of investment-cast aluminum foam. The high-fidelity numerical framework captures the deformation mechanisms across multiple length scales and is able to predict the inhomogeneous grain-to-continuum compressive response in the foams. Also, by incorporating grain-boundary strengthening and free-surface softening mechanisms, the current framework accounts simultaneously for the Hall-Petch effect in polycrystalline alloys and the effect of unconstrained slip-based deformation at the strut free surfaces. The crystal-plasticity simulations explicitly account for the effect of grain structure and surface conditions (oxidized or non-oxidized) and provide new insights into the mechanical behavior of open-cell metallic foams. Results show that the relationship between grain size and plateau stress in the foams follows a Hall-Petch-like trend provided there is at least one complete grain along the strut length and approximately one grain through the strut thickness; below this threshold, the effective plateau stress of the foam tends to saturate. In the presence of an oxidation layer, when the dislocations are blocked at the strut boundaries, the effect of grain structure on plateau stress is less pronounced than when an oxidation layer is absent. It is also shown that by accounting for grain size and surface condition through the parameters σ y and C 4 , the accuracy and generalizability of the well-established Gibson-Ashby model for plastic collapse strength can be significantly enhanced.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Corrosion Behavior and Inhibition · Pickering emulsions and particle stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. The mechanical properties of cellular solids10.1007/BF02645546 ↗
2. Multifunctionality of cellular metal systems10.1016/S0079-6425(98)00004-8 ↗
3. Manufacture, characterisation and application of cellular metals and metal foams10.1016/S0079-6425(00)00002-5 ↗
4. Aluminum foams: on the road to real applications10.1557/mrs2003.83 ↗
5. Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (pcms)10.1016/j.solener.2010.04.022 ↗
6. Titanium foams for biomedical applications: a review10.1179/175355510X12744412709403 ↗
7. Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays
8. Next generation orthopaedic implants by additive manufacturing using electron beam melting10.1155/2012/245727 ↗
9. On the crushing of aluminum open-cell foams: Part i. experiments10.1016/j.ijsolstr.2008.09.008 ↗
10. Deformation and failure behaviour of open cell al foams under quasistatic and impact loading10.1016/j.msea.2013.08.030 ↗
11. Macro and micro collapse mechanisms of closed-cell aluminium foams during quasi-static compression10.1016/j.matdes.2017.01.011 ↗
12. Deformation behavior of open-cell stainless steel foams10.1016/j.msea.2014.07.098 ↗
13. Compression–compression fatigue of open cell aluminum foams: macro-/micro-mechanisms and the effects of heat treatment10.1016/j.msea.2003.08.009 ↗
14. Compressive response of open-cell foams. part i: morphology and elastic properties10.1016/j.ijsolstr.2004.07.023 ↗
15. On the crushing response of random open-cell foams10.1016/j.ijsolstr.2012.03.003 ↗
16. Fracture mechanics of stainless steel foams10.1016/j.msea.2013.03.062 ↗
17. On the crushing of aluminum open-cell foams: Part ii analysis10.1016/j.ijsolstr.2008.10.016 ↗
18. Compressive response of open cell foams part ii: initiation and evolution of crushing10.1016/j.ijsolstr.2004.07.024 ↗
19. Deformation behavior estimation of aluminum foam by x-ray ct image-based finite element analysis10.1007/s11661-012-1532-7 ↗
20. Insight into the physics of foam densification via numerical simulation10.1016/j.jmps.2004.09.003 ↗
21. Simulation of the densification of real open-celled foam microstructures10.1016/j.jmps.2005.07.007 ↗
22. On the microstructure of open-cell foams and its effect on elastic properties10.1016/j.ijsolstr.2007.10.008 ↗
23. Microscale testing of the strut in open cell aluminum foams10.1007/s10853-005-6100-8 ↗
24. An investigation of the microstructure and strength of open-cell 6101 aluminum foams10.1007/s11661-002-0065-x ↗
25. Fracture and microstructure of open cell aluminum foam10.1007/s10853-005-4995-8 ↗
26. In-situ and ex-situ microtensile testing of individual struts of al foams and ni/al hybrid foams10.1016/j.matdes.2018.04.075 ↗
27. Three-dimensional grain mapping of open-cell metallic foam by integrating synthetic data with experimental data from high-energy x-ray diffraction microscopy10.1016/j.matchar.2018.07.031 ↗
28. Grain size effects on the mechanical behavior of open-cell nickel foams10.1002/adem.200405153 ↗
29. Strength of open-cell 6101 aluminum foams under free and constrained compression10.1016/j.msea.2006.10.080 ↗
30. Effects of microstructural characteristics on mechanical properties of open-cell nickel foams10.1179/174328405X64006 ↗
31. Effects of heat treatment on the compressive deformation behavior of open cell aluminum foams10.1016/S0921-5093(04)00933-5 ↗
32. Properties of heat-treated aluminium foams10.1016/S0921-5093(02)00582-8 ↗
33. The effect of cooling rate on the structure and properties of closed-cell aluminium foams10.1016/j.actamat.2010.05.039 ↗
34. Effect of cell morphology and heat treatment on compressive properties of aluminum foams10.1081/AMP-120038651 ↗
35. Influence of heat treatments on the microstructure and mechanical behaviour of open cell alsi7mg0. 3 foams on different lengthscales10.1016/j.actamat.2016.02.041 ↗
36. Effect of heat treatments on the crushing behaviour and energy absorbing performance of aluminium alloy foams10.1016/j.matdes.2008.06.058 ↗
37. Size effects in ductile cellular solids. part ii: experimental results10.1016/S0020-7403(00)00043-6 ↗
38. Dream. 3d: a digital representation environment for the analysis of microstructure in 3d
39. A tool to generate grain-resolved open-cell metal foam models10.1007/s40192-019-00136-5 ↗
40. Smith · 2009
41. Multiscale modeling of elasto-viscoplastic polycrystals subjected to finite deformations10.12989/imm.2009.2.4.375 ↗
42. A geometric approach to modeling microstructurally small fatigue crack formation: I. probabilistic simulation of constituent particle cracking in aa 7075-t65110.1088/0965-0393/16/6/065007 ↗
43. A method to generate conformal finite-element meshes from 3d measurements of microstructurally small fatigue-crack propagation10.1111/ffe.12449 ↗
44. Data-driven correlation analysis between observed 3d fatigue-crack path and computed fields from high-fidelity, crystal-plasticity, finite-element simulations10.1007/s11837-018-2884-2 ↗
45. A convected-particle tetrahedron interpolation technique in the material-point method for the mesoscale modeling of ceramics
46. Finite element formulation for modelling large deformations in elasto-viscoplastic polycrystals10.1002/nme.1045 ↗
47. The effect of microstructure on mechanical properties of forged 6061 aluminum alloy10.2320/matertrans.MA201324 ↗
48. Capturing the effects of free surfaces on void strengthening with dislocation dynamics10.1016/j.actamat.2015.08.067 ↗
49. A half-space peierls–nabarro model and the mobility of screw dislocations in a thin film10.1016/j.actamat.2006.11.015 ↗
50. Barrett · 1990 · vol. 1228
51. Y. Wang, H. Huang, G. Jia, G. Ke, J. Zhang, G. Yuan, Effect of grain size on the mechanical properties of mg foams, J. Mater. Sci. Technol..
52. J. Ahrens, B. Geveci, C. Law, Paraview: an end-user tool for large data visualization, The visualization handbook 717.10.1016/B978-012387582-2/50038-1 ↗
53. High-throughput feature extraction for measuring attributes of deforming open-cell foams10.1109/TVCG.2019.2934620 ↗
54. Shared-memory parallel computation of morse-smale complexes with improved accuracy10.1109/TVCG.2018.2864848 ↗
55. Gibson · 1999
56. Compressive and tensile behaviour of aluminum foams10.1016/S0921-5093(99)00170-7 ↗
57. Asm handbook, volume 2b, properties and selection of aluminum alloys
58. A multiscale comparison of stochastic open-cell aluminum foam produced via conventional and additive-manufacturing routes10.1016/j.msea.2017.08.102 ↗