journal article·2021-01Open access

Non-monotonic evolution of surface roughness in a stainless steel during cold deformation

Fredrik Ottenklev, Martin Adell, Dmytro Orlov

Abstract

In this study, polished and unpolished sheet samples of austenitic stainless steel 316L were tensile strained to investigate the evolution of surface roughness based on Sa- and Ra characteristics. In polished steel sheets, surface roughness increases with the increase of true strain up to a maximum of e = 0.14. Thereafter, roughness decreases until e = 0.26 for approximately 25%, and then becomes independent on strain. The highest roughness levels are found to be localised primarily around surface grain boundaries. The roughness-strain correlation can be explained by grain rotation and cross-slip. Unpolished sheets demonstrate near-linear relationship between tensile strain and surface roughening due to the presence of an oxide layer. The layer has a thickness of approximately 1 μm with a morphology resembling the microstructure in the substrate. When strained, it appears to show two roughness components. First one is a shortwave component originating at the oxide grain boundaries, which is believed to be produced by the rotation of underlying grains. The second one is a longwave component, which is generated by the fracture of oxide layer due to lower ductility. The slope of roughness – true strain relationship is found to be also grain orientation-dependent.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. On the rougening of free surface in deformation process10.1299/jsme1958.14.171 ↗
2. Surface roughness caused by metal forming10.1016/S0007-8506(07)61815-0 ↗
3. A study of the fundamental relationships between deformation-induced surface roughness and strain localization in AA575410.1007/s11661-009-9881-6 ↗
4. Analysis of deformation-induced surface morphologies in steel sheet10.1016/j.actamat.2005.05.038 ↗
5. Roughening of the free surface of metallic sheets during stretch forming10.1016/0921-5093(90)90093-I ↗
6. M.R. Stoudt, A.M.S.W. Banovic, R.J. Fields, Effect of uniaxial strain on the surface roughness of pure mg and Mg-AZ31 alloy, in: A.A. Luo (Ed.), Magnesium Technology 2004, TMS2004, pp. 269-274.
7. Micromechanical model of deformation-induced surface roughening in polycrystalline materials10.1134/S1029959917030080 ↗
8. Effects of deformation mode on surface roughening of austenitic stainless steels10.1179/026708310X12701095964441 ↗
9. On the relationship between deformation-induced surface roughness and plastic strain in AA5052—is it really linear?10.1007/s11661-011-0694-z ↗
10. Grain refinement versus voids accumulation during severe plastic deformations of polycrystals: mathematical simulation10.1016/j.mechmat.2004.07.006 ↗
11. Producing bulk ultrafine-grained materials by severe plastic deformation: ten years later10.1007/s11837-016-1820-6 ↗
12. Controlling strength and ductility: dislocation-based model of necking instability and its verification for ultrafine grain 316L steel10.1016/j.actamat.2016.01.005 ↗
13. 1997
14. 2012
15. 1996
16. 1996
17. Li · 2012
18. 2016 · 1
19. Passive films on stainless steels—chemistry, structure and growth10.1016/S0013-4686(02)00841-1 ↗
20. Beneficial effect of shot peening on steamside oxidation of 300-series austenitic steels: an electrochemical study10.1016/j.apsusc.2017.08.035 ↗
21. The tracer diffusion OF transition metals IN duplex oxide grown ON a T316 stainless steel10.1016/0010-938X(81)90080-9 ↗
22. The influence OF oxygen partial pressure ON the kinetics OF duplex scale formation ON 316 stainless steel10.1016/0010-938X(82)90081-6 ↗
23. Breakdown and evolution of the protective oxide scales of AISI 304 and AISI 316 stainless steels under high-temperature oxidation10.1155/2011/824676 ↗
24. An in situ investigation of the tensile failure of oxide scales10.1007/BF01046759 ↗
25. The failure of iron oxide scales at growth temperature under tensile stress