Experiment and modelling on the effect of microstructural morphology on fatigue life of a Ni-based superalloy
Source abstract
Abstract
Abstract A directionally solidified Ni-based superalloy was pre-treated under high temperature with/without the applied stress to obtain different microstructural morphology. Then, strain-controlled low cycle fatigue experiments were carried out under 850 °C with a 0 strain ratio to measure the reduction in the fatigue resistance. The scanning electron microscopy (SEM) was employed to characterize the microstructures of the alloy with different treatments. The micro-deformation and dislocation movement were investigated via transmission electron microscopy (TEM). The results show that both coarsening and rafting morphology have negative effects on the fatigue properties, which is closely related to the deformation mechanism of the alloys with different γ ' morphology. The coarsening morphology decreases the shear resistance of the γ ' precipitates, resulting in shearing of γ ' particles. More plastic deformation introduces during the cyclic process, leading in the reduction of fatigue life. On the other hand, the wide γ channel promoted the piling up and movement of dislocations in the matrix, also resulting in reduction of plastic deformation resistance and lifespan. Finally, a fatigue life prediction model was proposed based on the continuum damage mechanics (CDM) by introducing the variation of matrix channels’ width, showing a good competency compared with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Reed · 2006
2. Ultrahigh-temperature materials for jet engines10.1557/mrs2003.189 ↗
3. Evolution of Ni-based superalloys for single gas turbine blades applications10.1016/S1270-9638(99)00108-X ↗
4. Evaluation of service e-induced microstructural damage for directionally solidified turbine blade of aircraft engine
5. Mechanical properties deterioration and its relationship with microstructural variation using small coupons sampled from serviced turbine blades10.1016/j.msea.2019.04.100 ↗
6. Low cycle fatigue damage in nickel-base superalloy single crystals at elevated-temperature10.1016/0921-5093(93)90332-9 ↗
7. Review Progress in Ostwald ripening theories and their applications to the γ′-precipitates in nickel-based superalloys Part II Nickel-based superalloys10.1023/A:1015408116016 ↗
8. The effect of uniaxial stress on the periodic morphology of coherent gamma prime precipitates in nickel-base superalloy crystals10.1007/BF02662660 ↗
9. Trans-interface diffusion-controlled coarsening10.1038/nmat1340 ↗
10. Quantitative predictions of the trans-interface diffusion-controlled theory of particle coarsening10.1016/j.actamat.2010.04.018 ↗
11. Local X-ray diffraction analysis of the structure of dendrites in single-crystal nickel-base superalloys10.1016/S1359-6454(97)00163-8 ↗
12. Facilitating effect of interfacial grooves on the rafting of nickel-based single crystal superalloy at high temperature[J]10.1016/j.scriptamat.2019.04.001 ↗
13. Evolution of the gamma/gamma ' microstructure during high-temperature creep of a nickel-base superalloy10.1016/S1359-6454(00)00197-X ↗
14. Microstructural degradation of CMSX-4: kinetics and effect on mechanical properties
15. Effects of segregation in nickel-base superalloys: dendritic stresses10.7449/2004/Superalloys_2004_537_543 ↗
16. Constitutive modelling of creep degradation due to rafting in single-crystalline Ni-base superalloys10.1016/j.msea.2008.04.089 ↗
17. A review of degradation in single crystal nickel based superalloys10.1179/174892406X171271 ↗
18. Low-cycle fatigue of single crystal nickel-based superalloy–mechanical testing and TEM characterisation10.1016/j.msea.2018.12.084 ↗
19. A comparative study on thermomechanical and low cycle fatigue failures of a single crystal nickel-based superalloy10.1016/j.ijfatigue.2011.07.009 ↗
20. Influence of precipitate morphology on high temperature fatigue crack growth of a single crystal nickel based superalloy10.1016/0956-716X(93)90324-L ↗
21. Dependence of the high-temperature low-cycle fatigue behaviour of the monocrystalline nickel-based superalloys CMSX-4 and CMSX-6 on the γ/γ′-morphology10.1016/S0921-5093(99)00453-0 ↗
22. Localized cyclic deformation and corresponding dislocation arrangements of polycrystalline Ni-based superalloys and pure Nickel in the VHCF regime10.1016/j.ijfatigue.2010.04.008 ↗
23. Time-incremental creep–fatigue damage rule for single crystal Ni-based superalloys10.1016/j.msea.2008.12.047 ↗
24. Directional coarsening in nickel-based superalloys and its effect on the mechanical properties10.1016/j.commatsci.2009.09.013 ↗
25. Influence of coarsened and rafted microstructures on the thermomechanical fatigue of a Ni-based superalloy10.1016/j.ijfatigue.2015.08.001 ↗
26. Metallic materials-Fatigue testing-Axial-force-controlled method
27. Constitutive modeling of the creep behaviour of single crystal superalloys under non-isothermal conditions inducing phase transformations10.1016/j.msea.2010.06.023 ↗
28. Huron · 2012 · 491
29. A mechanistically based model for high temperature LCF of Ni base superalloys
30. Interaction between creep and thermo-mechanical fatigue of CM247LC-DS
31. Influence of thermal exposure on γ′ precipitation and tensile properties of DZ951 alloy10.1016/j.matchar.2006.07.013 ↗
32. Tension/compression asymmetry of a single-crystal superalloy in virgin and degraded condition10.1016/j.actamat.2010.05.032 ↗
33. Creep residual life prediction of a nickel-based single crystal superalloy based on microstructure evolution10.1016/j.msea.2019.03.132 ↗
34. Dislocation structure in a single-crystal nickel-based superalloy during low cycle fatigue10.1007/BF02665056 ↗
35. Comparison of low-cycle fatigue behaviours between two nickel-basedd single-crystal superalloys10.1016/j.ijfatigue.2014.01.018 ↗
36. Temperature effect on the low cycle fatigue behaviour of a directionally solidified nickel-based superalloy10.1016/j.msea.2016.08.064 ↗
37. Evidence of variation in slip mode in a polycrystalline nickel-base superalloy with change in temperature from neutron diffraction strain measurements10.1016/j.actamat.2007.01.013 ↗
38. Effect of Re on low-cycle fatigue behaviors of Ni-based single-crystal superalloys at 900°C10.1016/j.msea.2014.02.073 ↗
39. Correlation of microstructure and creep stages in the <100> oriented superalloy SRR 99 at 1253 K10.1007/BF02647405 ↗
40. A · 2007
41. High temperature creep and low cycle fatigue of a nickel-base superalloy10.1016/j.msea.2010.01.001 ↗
42. An overview of the damage approach of durability modelling at elevated temperature10.1046/j.1460-2695.2001.00415.x ↗
43. A nonlinear continuous fatigue damage model, Fatigue Fract10.1111/j.1460-2695.1988.tb01216.x ↗
44. Lemaitre · 1990
45. Continuum damage mechanics: part II–damage growth, crack initiation, and crack growth10.1115/1.3173662 ↗
46. A continuum damage model for multi-axial low cycle fatigue of porous sintered metals based on the critical plane concept10.1016/j.mechmat.2016.09.013 ↗
47. Isotropic and kinematic hardening as functions of gamma prime precipitates in a nickel-basedd superalloy10.1016/j.ijfatigue.2014.05.011 ↗
48. Seung Hwan C. Park, Yutaka S. Sato, Hiroyuki Kokawa. Microstructural evolution and its effect on Hall-Petch relationship in friction stir welding of thixomolded Mg alloy AZ91D. J. Mater. Sci., 38(21):4379–4383.10.1023/A:1026351619636 ↗
49. Experimental investigation and life prediction of hot corrosion pre-exposure on low-cycle fatigue of a directionally solidified nickel-base superalloy10.1111/ffe.12295 ↗