journal article·2020-04

The strain accommodation of grain boundary and deformation mechanism of directionally solidified Mg alloy

Shengshi Zhao, Xiaoping Lin, Tao Chai, Jie Ye, Kongyang Yu, Yun Dong

Publisher page

Abstract

Abstract The Mg93.72Gd5.85Y0.43 alloy with columnar grains and preferred orientation of [22 4 ( _ ) 5] was selected in this paper, and its deformation mechanism was investigated by room-temperature tensile test, quasi-in-situ observation and Electron Back Scatter Diffraction (EBSD). The results showed that all the columnar grains had the “soft” orientation ([22 4 ( _ ) 5]) for both basal slip system and {10 1 ( _ ) 2} tensile twinning system. At the initial deformation stage (e ≤ 3%), basal dislocations started to move and crossed grain boundary, forming the basal-basal slip system pairs (B/B). As the deformation increased (e ≤ 50%), {10 1 ( _ ) 2} tensile twins selectively nucleated in single columnar grain and then expanded and merged rapidly, forming the bands of tensile twins and the basal slip system + tensile twinning-basal slip system pairs (BT/B). At the later deformation stage (e ≤ 74.5%), the orientation transition brought by tensile twinning triggered the activation of {10 1 ( _ ) 1} compression twins, leading to severe stress concentration and crack nucleation near the large-angle grain boundary and twinning boundary. The evolution of B/B pairs to BT/B pairs driven by grain boundary compatibility stress resulted in relaxation of the stress concentration at grain boundaries and guaranteed the excellent plasticity of the experimental alloy. A modified grain boundary compatibility stress calculation was proposed in this paper and was proved to be more effective in predicating the nucleation of tensile twins than the geometric compatibility factor.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature10.1007/s11661-005-0032-4 ↗
2. Economical and environmental factors in light alloys automotive applications10.1007/s11661-007-9156-z ↗
3. Effect of solute content and temperature on the deformation mechanisms and critical resolved shear stress in Mg-Al and Mg-Zn alloys10.1016/j.actamat.2019.03.027 ↗
4. Mechanik der plastischen formänderung von kristallen10.1002/zamm.19280080302 ↗
5. Slip geometry in partially constrained deformation10.1016/0001-6160(82)90119-5 ↗
6. Magnesium: properties-applications-potential10.1016/S0921-5093(00)01351-4 ↗
7. Multiple slip in bicrystal deformation10.1016/0001-6160(57)90044-5 ↗
8. The plastic deformation of bicrystals of f.c.c metals10.1016/0001-6160(61)90183-3 ↗
9. Slip, twinning, and fracture in hexagonal close-packed metals10.1007/BF02648537 ↗
10. Influence of annealing on the microstructure of commercial Mg alloy AZ31 after mechanical forming10.1016/j.msea.2006.06.070 ↗
11. The role of twinning and untwinning in yielding behavior in hot-extruded Mg–Al–Zn alloy10.1016/j.actamat.2006.09.010 ↗
12. Effects of the growth rate on microstructures and room temperature mechanical properties of directionally solidified Mg-5.2Zn alloy10.1007/s11837-016-1965-3 ↗
13. Directional solidification and microsegregation in a magnesium-aluminum-calcium alloy10.1007/s11661-012-1159-8 ↗
14. Directional solidification of Mg-Al alloys and microsegregation study of Mg alloys AZ31 and AM50: Part II. comparison between AZ31 and AM5010.1007/s11661-009-9788-2 ↗
15. Microstrctural evolution, phase constitution and mechanical properties of directionally solidified Mg-5.5Zn-xGd (x = 0.8, 2.0, and 4.0) alloys10.1016/j.jallcom.2017.05.129 ↗
16. Microstructure evolution and mechanical properties of directionally solidified Mg-xGd (x=0.8, 1.5, and 2.5) alloys10.1016/j.msea.2016.03.065 ↗
17. Microstructures and microsegregation of directionally solidi-fied Mg-1.5Gd Magnesium alloy with different growth rates
18. Tensile properties of directionally solidified AZ91 Mg alloy10.2320/matertrans.44.436 ↗
19. Microstructure, microsegregation, and mechanical properties of directional solidified Mg-3.0Nd-1.5Gd alloy10.1007/s40195-014-0151-2 ↗
20. Microstructure and room temperature mechanical properties of directionally solidified Mg-2.35Gd magnesium alloy10.1016/S1003-6326(16)64231-0 ↗
21. Microstructure evolution and deformation behaviors of AZ31 Mg alloy with different grain orientation during uniaxial compression10.1016/j.jallcom.2017.12.312 ↗
22. Dendritic solidification of magnesium alloy AZ9110.1007/BF02656439 ↗
23. Anomalousα-Mg dendrite growth during directional solidification of a Mg-Zn alloy10.1007/s11661-016-3618-0 ↗
24. High-temperature tensile properties and deformation mechanism of polycrystalline Magnesium alloys with specifically oriented columnar grain structures10.1016/j.msea.2018.05.061 ↗
25. {101¯2} twinning behavior in magnesium bicrystal10.1016/j.jallcom.2017.07.240 ↗
26. H. Z. Fu, J. J. Guo, L. Liu, J. S. Li, Directional Solidification and Processing of Advanced Materials. Beijing: Science Press, 2008.
27. Grain structure development in directional solidification of nickel-base super alloys10.1016/j.msea.2004.03.017 ↗
28. Compatibility of deformation in two-phase Ti-Al alloys: dependence on microstructure and orientation relationships10.1007/BF02670762 ↗
29. Quantitative prediction of texture effect on Hall–Petch slope for magnesium alloys10.1016/j.actamat.2019.05.016 ↗
30. Experimental determination and theoretical prediction of twin orientations in magnesium alloy AZ3110.1016/j.scriptamat.2004.01.013 ↗
31. Identification and analysis of twinning variants during compression of a Mg–Al–Zn alloy10.1016/j.scriptamat.2007.09.047 ↗
32. Compatibility stresses in deformed bicrystals, Czech
33. Slip heterogeneities in deformed aluminium bicrystals10.1016/0001-6160(80)90147-9 ↗
34. Grain boundary effects in deformed bicrystals10.1016/0001-6160(82)90233-4 ↗
35. Elastic Anisotropy of hcp metal crystals and polycrystals
36. Understanding common grain boundary twins in Mg alloys by a composite Schmid factor10.1016/j.ijplas.2019.07.018 ↗